CHACON 34946

Chacon Door/Window Opening Detector

Muenzaniso: 34946

Mutengo: CHACON

1. Nhanganyaya

This manual provides essential instructions for the installation, operation, and maintenance of your Chacon Door/Window Opening Detector, Model 34946. This device is designed to enhance the security of your premises by detecting unauthorized openings of doors and windows.

1.1. Package Zviri mukati

Ndokumbira utarise kuti zvese zvirimo mupasuru yako:

Chacon Door/Window Sensor product box

Image 1.1: Product packaging for the Chacon Door/Window Opening Detector.

2. Safety Information

3. Chigadzirwa Pamusoroview

The Chacon Door/Window Opening Detector consists of two main parts: the main sensor unit and a magnetic contact. When these two parts are separated (e.g., a door or window opens), the sensor triggers an alert.

Chacon Door/Window Sensor main unit and magnet

Image 3.1: The Chacon Door/Window Opening Detector, showing the main sensor unit and its magnetic counterpart.

3.1. Key Features

4. Setup uye Kuiswa

4.1. Kuiswa kwebhatiri

  1. Locate the battery compartment on the main sensor unit.
  2. Vhura chivharo chekamuri.
  3. Insert two CR2032 3V batteries, ensuring correct polarity (+/-).
  4. Vhara chivharo chebhatiri zvakachengeteka.

4.2. Kuisa Detector

The detector should be mounted on a door or window frame, with the magnetic contact mounted on the moving part (door/window) itself. Ensure the two parts are aligned and close to each other when the door/window is closed, typically within 1 cm.

  1. Choose a suitable location on your door or window frame where the sensor and magnet can be mounted parallel to each other.
  2. Clean the mounting surfaces thoroughly to ensure good adhesion if using adhesive pads (not explicitly mentioned but common).
  3. Attach the main sensor unit to the fixed frame.
  4. Attach the magnetic contact to the moving part of the door or window, aligning it with the main sensor unit.
  5. Test the installation by opening and closing the door/window to ensure the sensor triggers correctly.
Chacon Door/Window Sensor mounted on a frame

Mufananidzo 4.1: Eksample of the Chacon Door/Window Opening Detector installed on a door or window frame.

4.3. Pairing with Chacon Alarm Systems

To integrate the detector with a compatible Chacon alarm system (e.g., models 34940, 34941, 34942, 34943, 34948, 34949), follow the pairing instructions provided with your specific alarm system. Generally, this involves putting the alarm system into pairing mode and then triggering the door/window sensor (e.g., by opening it) to register it with the system.

5. Operating Instructions

5.1. Detection Principle

The detector operates on a magnetic contact principle. When the main sensor unit and the magnetic contact are separated by more than approximately 1 cm, the sensor detects an "open" state. When they are brought back together, it detects a "closed" state.

5.2. Alarm Triggering

Upon detecting an opening, the sensor will:

5.3. Anti-Tamper Basa

The sensor is equipped with an anti-tamper function. If the main sensor unit is forcibly removed from its mounted position, it will trigger an alarm, even if the magnetic contact remains in place.

5.4. Pet Immunity

This detector is designed to ignore movements from domestic animals weighing up to 25kg, minimizing false alarms caused by pets.

6. Kuchengeta

6.1. Kutsiviwa kwebhatiri

When the batteries are low, the sensor may indicate this through a specific LED flash pattern or by sending a low battery signal to a paired alarm system. To replace the batteries:

  1. Vhura nzvimbo yebhatiri sezvakatsanangurwa muChikamu 4.1.
  2. Remove the old CR2032 3V batteries.
  3. Insert new CR2032 3V batteries, observing correct polarity.
  4. Vhara nzvimbo yebhatiri.

6.2. Kuchenesa

Wipe the sensor and magnet with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7. Kugadzirisa matambudziko

DambudzikoZvinogona KukonzeraSolution
Sensor not detecting opening/closing.
  • Mabhatiri akaderera kana kupera.
  • Sensor and magnet are misaligned or too far apart.
  • Mudziyo hauna kubatidzwa.
  • Replace batteries (see Section 6.1).
  • Realign the sensor and magnet, ensuring they are within 1 cm when closed.
  • Ita shuwa kuti mabhatiri aiswa nemazvo.
No signal received by alarm system.
  • Sensor not paired with the alarm system.
  • Kunze kwewireless range.
  • Kupindira.
  • Refer to Section 4.3 and your alarm system's manual for pairing instructions.
  • Relocate the sensor closer to the alarm system or use a signal repeater if available.
  • Check for other 433 MHz devices causing interference.
Manyepo ekunyevera.
  • Sensor or magnet is loose.
  • Extreme vibrations.
  • Kuiswa kusina kururama.
  • Securely re-mount the sensor and magnet.
  • Ensure the mounting surface is stable.
  • Verify alignment and proximity of sensor and magnet.

8. Zvinotsanangurwa

Model Number34946
MugadziriChacon
Zviyero zveChigadzirwa (L x W x H)10 x 4 x 15 cm
Kurema100 magiramu
ColorChena
Magetsi2 x CR2032 3V Batteries
Radio Frequency433 MHz
Wireless Transmission RangeUp to 80 meters (open field)
Sound Level (Alarm)110 Decibel
Compatible Chacon Alarm Systems34940, 34941, 34942, 34943, 34948, 34949
EAN05411478349464

9. Warranty uye Tsigiro

9.1. Ruzivo rweWaranti

CHACON products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official CHACON website. Chengetedza humbowo hwako hwekutenga kune warranty claim.

9.2. Mutengi Tsigiro

For technical assistance, troubleshooting, or further information regarding your Chacon Door/Window Opening Detector, please contact CHACON customer support. You can find contact details on the official CHACON websaiti: www.chacon.com (Cherechedza: Ichi chibatiso chenzvimbo URL, please refer to the actual brand websaiti yekutsigirwa.)

Related Documents - 34946

Preview Chacon All-in-One Alarm System User Manual
This user manual provides comprehensive guidance for the Chacon All-in-One Alarm System (Model 34045), covering installation, operation, troubleshooting, and technical specifications for effective home security.
Preview Chacon 32175-32176 Installation Guide uye Mirayiridzo
Nhanho-ne-nhanho yekumisikidza mirairo yeChacon 32175-32176 yemagetsi yekuwedzera, kusanganisira dhiyagiramu yegungano inotsanangurwa zvinyorwa, ruzivo rwemugadziri, uye ruzivo rwekudzokorora. Gwaro iri rakagadzirirwa kujeka uye kuwanikwa.
Preview Chacon IPCAM-FI01 Wi-Fi Camera User Manual
User manual for the Chacon IPCAM-FI01 Wi-Fi Camera. Learn how to set up, connect, and use features like motion detection, night vision, and two-way audio with the Chacon Cam+ app. Get detailed instructions and specifications for your home security camera.
Preview Chacon Wi-Fi Nguva Yekushandisa Manual (53022/53023)
Chinyorwa chemushandisi cheChacon Wi-Fi Timer plug (mienzaniso 53022 uye 53023), inotsanangura kuseta, mashandisiro, kugadzirisa matambudziko, uye tekinoroji yakatarwa. Inoenderana neMy Chacon uye DiO imwe maapplication, uye kutonga kwezwi kuburikidza neGoogle Home neAmazon Alexa.
Preview Manual de Instalação e Utilizador do Vídeoporteiro CHACON (Modelos 34801, 34802)
Guia completo para a instalação e utilização do vídeoporteiro CHACON, incluindo especificações técnicas, resolução de problemas e notas de segurança.
Preview Chacon 32180-32181 Lamp Holder Installation Guide
Nhanho-nhanho mirairo yekuisa iyo Chacon 32180-32181 lamp mubati. Inosanganisira wiring kutungamira uye ruzivo rwechigadzirwa.