1. Nhanganyaya
This manual provides essential information for the installation, operation, and maintenance of the Allied Telesis AT-GS910/5-10 Unmanaged Switch. This device is a high-performance, 5-port 10/100/1000T (Gigabit Ethernet) unmanaged switch designed for small office and home office (SOHO) environments, offering simple plug-and-play connectivity without complex configuration.
The AT-GS910/5-10 is equipped with an internal power supply unit (PSU), ensuring a compact and reliable design for seamless integration into your network.
2. Safety Information
Please read and understand the following safety precautions before installing or operating the switch. Failure to comply with these guidelines may result in injury or damage to the device.
- Kunobva Simba: Use only the power cord supplied with the device and connect it to a grounded electrical outlet. Ensure the voltage matches the requirements specified on the switch's label.
- Kufefetedza Do not block any ventilation openings. Ensure adequate airflow around the switch to prevent overheating. Avoid placing the switch in enclosed spaces or on soft surfaces that may impede ventilation.
- Environment: Operate the switch in a dry environment, away from water, moisture, and excessive humidity. Avoid exposure to direct sunlight or extreme temperatures.
- Kuiswa: Place the switch on a stable, flat surface. Do not place heavy objects on top of the switch.
- Sevhisi: Usaedze kushandira chigadzirwa ichi iwe pachako. Tumira masevhisi ese kuvashandi vanokwanisa.
3. Package Zviri mukati
Verify that all items are present and in good condition upon unpacking. If any item is missing or damaged, contact your vendor immediately.
- Allied Telesis AT-GS910/5-10 Unmanaged Switch
- Power Cord
- Quick Start Guide (kana zvinyorwa zvakafanana)
4. Zvigadzirwa zveChigadzirwa
The AT-GS910/5-10 switch offers robust features for reliable network connectivity:
- 5 Gigabit Ethernet Zviteshi: Provides five 10/100/1000T RJ45 ports for high-speed wired connections.
- Unmanaged Operation: Plug-and-play functionality requires no configuration, making it easy to deploy.
- Auto-Negotiation: Each port automatically detects the speed and duplex mode of the connected device.
- MDI/MDIX Yega: Zvinobvisa kudiwa kwetambo dzinochinjika, zvichiita kuti network isashande zviri nyore.
- Internal Power Supply: Integrated power supply for a cleaner setup and reduced cable clutter.
- Zviratidzo zve LED: Front-panel LEDs provide real-time status for power, link/activity, and speed.
Mufananidzo 4.1: Mberi view of the AT-GS910/5-10 switch, highlighting the five Gigabit Ethernet ports and status LEDs.
Mufananidzo 4.2: Kumashure view of the AT-GS910/5-10 switch, illustrating the power input and overall compact design.
5. Setup
Follow these steps to set up your AT-GS910/5-10 switch:
- Sarudza Nzvimbo: Select a flat, stable surface for the switch. Ensure there is adequate space around the device for proper ventilation. Avoid placing it near heat sources or in direct sunlight.
- Batanidza Simba:
- Insert one end of the provided power cord into the AC power inlet on the back of the switch.
- Batanidza rimwe divi retambo yemagetsi muchinoburitsa magetsi chakajairika.
- Power LED iri pamberi pepaneru inofanira kupenya, zvichiratidza kuti switch iri kugamuchira simba.
- Batanidza Zvishandiso zveNetwork:
- Using standard Ethernet cables (Cat5e or better recommended for Gigabit speeds), connect your network devices (e.g., computers, printers, network-attached storage, routers) to any of the five RJ45 ports on the front of the switch.
- The Link/Act LED for each connected port will illuminate when a valid network connection is established and will blink to indicate data activity.
- The SPD (Speed) LED will indicate the connection speed (e.g., 1000 for Gigabit, 100 for Fast Ethernet, 10 for Ethernet).
Your AT-GS910/5-10 switch is now ready for use. As an unmanaged switch, no further configuration is required.
6. Kushandisa Switch
The Allied Telesis AT-GS910/5-10 is an unmanaged switch, meaning it operates automatically without the need for user configuration. Once powered on and connected to network devices, it will begin forwarding data traffic.
LED Indicators
Ma LED epaneru repamberi anoratidza mashandiro eswitch:
- Simba re LED:
- On: Iyo switch inoshandiswa uye inoshanda zvakajairika.
- Off: The switch is powered off or not receiving power.
- L/A (Link/Act) LED (per port):
- On: A valid network link is established on the port.
- Kubwaira: Basa redata riri kuitika pachiteshi.
- Off: Hapana chinongedzo chawanikwa kana mudziyo wakabatana wakadzimwa.
- SPD (Speed) LED (per port):
- 1000 (Girinhi): The port is operating at 1000 Mbps (Gigabit Ethernet).
- 100 (Orange): The port is operating at 100 Mbps (Fast Ethernet).
- 10 (Yadzimwa): The port is operating at 10 Mbps (Ethernet).
- LOOP DET (Loop Detection) LED:
- On: Indicates a network loop has been detected. The switch will block the port(s) causing the loop to prevent network instability.
- Off: No network loop detected.
7. Kuchengeta
The AT-GS910/5-10 switch is designed for minimal maintenance. However, following these guidelines can help ensure its longevity and optimal performance:
- Kuchenesa: Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure the ventilation openings are free from dust and debris.
- Kufefetedza Regularly check that the switch's ventilation holes are not obstructed. Proper airflow is crucial to prevent overheating.
- Cable Management: Ensure network cables are neatly organized and not excessively bent or strained. This prevents damage to cables and ports.
- Power Cycle: If the switch experiences unusual behavior, a simple power cycle (unplugging the power cord, waiting 10 seconds, and plugging it back in) can often resolve minor issues.
8. Kugadzirisa matambudziko
If you encounter issues with your AT-GS910/5-10 switch, refer to the following common problems and solutions:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| No Power LED indication. | Kuchinja hakusi kugamuchira simba. |
|
| Link/Act LED is off for a connected device. | No valid network link. |
|
| Kumhanya kwenetwork kunononoka. | Cable issue, device limitation, or network congestion. |
|
| LOOP DET LED is on. | Network loop detected. |
|
9. Zvinotsanangurwa
| Feature | Tsanangudzo |
|---|---|
| Model Number | AT-GS910/5-10 |
| Ports | 5 x 10/100/1000T RJ45 Gigabit Ethernet Ports |
| Chinja Type | Unmanaged |
| Data Transfer Rate | 10/100/1000 Mbps (Gigabit Ethernet) |
| Magetsi | Yemukati PSU |
| Dimensions (LxWxH) | 6.3 x 4.13 x 1.38 inches (160 x 105 x 35 mm) |
| Item Weight | 1.1 pounds (500 Grams) |
| Interface Type | RJ45 |
| Nyaya Yenyaya | Plastiki |
Cherechedza: Magadzirirwo anogona kuchinja pasina chiziviso. Kuti uwane ruzivo rwazvino, ndapota tarisai kune mukuru wemugadziri website.
10. Warranty uye Tsigiro
For information regarding the product warranty, please refer to the warranty card included with your product or visit the official Allied Telesis website. Warranty mazwi uye mamiriro anogona kusiyana nedunhu uye chigadzirwa.
If you require technical assistance or have questions not covered in this manual, please contact Allied Telesis customer support or your local reseller. Support contact information can typically be found on the Allied Telesis official websaiti:
