1. Nhanganyaya
Thank you for choosing the Einhell TC-LD 25 Laser Distance Meter. This device is designed for quick and accurate measurement of distances up to 25 meters. Its compact design and user-friendly interface make it an ideal tool for various applications in construction, renovation, and DIY projects. Please read this manual carefully before using the device to ensure safe and optimal operation.
Figure 1: Einhell TC-LD 25 Laser Distance Meter
2. Safety Information
This device uses a Class II laser. Observe the following safety precautions:
- Usatarise zvakananga mu laser beam.
- Usanongedza laser beam kune vanhu kana mhuka.
- Dzivisa ziso rakananga kuratidzwa kune laser beam.
- Do not disassemble or modify the device. Repairs should only be performed by authorized personnel.
- Chengetedza mudziyo usingasvikike nevana.
The laser diode operates at 635 nm.
3. Chigadzirwa Pamusoroview
Familiarize yourself with the components of your Einhell TC-LD 25.
Mufananidzo 2: Mberi View (Display, Buttons)
Mufananidzo 3: Kudzoka View (Battery Compartment)
Mufananidzo 4: Rutivi View
Zvikamu:
- Laser Aperture: Inoburitsa laser beam yekuyera.
- Ratidza Sikirini: Shows measurement results, mode, and battery status.
- Measurement Button (ON/MEAS): Masimba pamudziyo uye anotanga kuyerwa.
- Function/Unit Button (FUNC/UNIT): Cycles through measurement modes and changes units.
- Bhatani reReference Point: Switches between front and rear reference points.
- Clear/Off Button (C/OFF): Clears the last measurement or powers off the device.
- Battery Compartment: Located at the back for AAA batteries.
4. Setup
4.1 Kuiswa kwebhatiri
The Einhell TC-LD 25 requires two (2) AAA alkaline batteries (not included).
- Open the battery compartment cover located on the back of the device (refer to Figure 3).
- Isa maviri AAA mabhatiri, kuve nechokwadi chechokwadi polarity (+/-).
- Vhara chivharo chebhatiri zvakachengeteka.
Mufananidzo 5: Battery Compartment
5. Operating Instructions
5.1 Kubatidza/Kudzima
- Kubatidza: Press the ON/MEAS bhatani. Iyo laser ichashanda.
- Kudzima: Dzvanya uye ubate iyo C/OFF button for a few seconds. The device also features an automatic shutdown function after 3 minutes of inactivity to conserve battery life.
5.2 Basic Distance Measurement
- Batidza mudziyo.
- Ratidza danda relaser pane chinangwa.
- Press the ON/MEAS button once. The measured distance will be displayed on the screen.
5.3 Chiyero Chinoenderera (Mini/Max)
This mode allows you to track the minimum and maximum distances as you move the device.
- Press the FUNC/UNIT button until the continuous measurement icon (often a running person or min/max symbols) appears on the display.
- Move the device slowly towards or away from the target. The display will continuously update the current, minimum, and maximum distances.
- Press ON/MEAS to stop continuous measurement and view the final minimum and maximum values.
Figure 6: Continuous Measurement Example
5.4 Changing Reference Point
The device can measure from its front edge or its rear edge. The default is usually the rear edge.
- Press the Reference Point button to toggle between front and rear measurement. An icon on the display will indicate the active reference point.
Figure 7: Measuring from Rear Edge
Figure 8: Measuring from Front Edge
5.5 Kuchinja Mayuniti
The device primarily uses metric units (meters).
- Press the FUNC/UNIT button repeatedly to cycle through available units (e.g., m, ft, in).
6. Kuchengeta
- Geza mudziyo nekanyoro, damp jira. Usashandise abrasive cleaners kana solvents.
- Gara uchitarisa imba yebhatiri kuti yakaora. Bvisa mabhatiri kana mudziyo usingazoshandiswe kwenguva yakareba.
- Store the device in its included pouch in a dry, dust-free environment.
Figure 9: Included Carrying Pouch
7. Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Mudziyo haubatike | Low or dead batteries; incorrect battery polarity | Replace batteries; check polarity |
| Zviyero zvisina kururama | Unstable surface; obstruction in laser path; extreme temperatures | Ensure stable measurement; clear path; operate within specified temperature range |
| Laser haisi kuonekwa | Bright ambient light; long distance measurement | Use in lower light conditions; use a target plate for long distances |
8. Zvinotsanangurwa
| Feature | Tsanangudzo |
|---|---|
| Model Number | TC-LD 25 (2270075) |
| Measuring Range | 0.05 m - 25 m |
| Chiyero Chakarurama | +/- 3 mm / m |
| Laser Kirasi | Kirasi II |
| Laser Diode | 635 nm |
| Automatic Deactivation | 3 kwemaminitsi |
| Mabhatiri | 2 x AAA (Alkaline) |
| Dimensions (L x W x H) | 11.2 x 2.5 x 4 cm |
| Kurema | 70 g |
| Material | Acrylonitrile Butadiene Yakajeka |
| International Protection Rating | IP54 (Water resistant) |
9. Warranty uye Tsigiro
Einhell products are manufactured with high-quality materials and undergo strict quality control. For any warranty claims or technical support, please refer to your purchase documentation or contact Einhell customer service.
Spare parts availability in the EU is guaranteed for 1 year.
For further information, visit the official Einhell store: Chitoro cheEinhell
