Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Nhanganyaya

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Safety Information

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Use only the power cord supplied with the printer.
• Usaisa printa pamvura kana pahunyoro hwakawandisa.
• Iva nechokwadi chekuti printer yakaiswa panzvimbo yakagadzikana uye yakati sandara.
• Dzivisa kuvharira kuvhurika kwemhepo.
• Disconnect power before cleaning or servicing the printer.
• Do not attempt to open or repair the printer yourself. Refer to qualified service personnel.

3. Package Zviri mukati

Tarisa uone kuti zvinhu zvese zviripo mupakeji:

• Intermec PC43TB01100201 Printer Unit
• US Power Cord
• Quick Start Guide (isina kuisirwa mubhuku rino)
• Software/Driver CD (may vary by package)

4. Setup

4.1 Kusunungura uye Kuisa

1. Nyatsobvisa printer kubva pakurongedzerwa kwayo.
2. Place the printer on a flat, stable surface with adequate ventilation.
3. Ensure easy access to power outlets and computer ports.

4.2 Kubatanidza Simba

1. Connect the supplied US power cord to the printer's power input.
2. Batanidza imwe magumo etambo yemagetsi mugetsi rinodzika pasi.

4.3 Kubatanidza kune Computer

The PC43TB01100201 printer supports USB and LAN connectivity.

• USB Connection: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• LAN Connection: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Loading Media (Labels/Ribbon)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Vhura kavha yeprinta.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Vhara chivharo cheprinta.

5. Operating Instructions

5.1 Kubatidza/Kudzima

• Kubatidza: Press the power button located on the printer. The LCD display will illuminate.
• Kudzima: Press and hold the power button until the printer shuts down.

5.2 Kushandisa LCD Display

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Kudhinda

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Open your label design software or application.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Initiate the print job.

The printer features a tear-off function for easy label separation after printing.

6. Kuchengeta

6.1 Kuchenesa Printer

Kuchenesa nguva dzose kunobatsira kuchengetedza kunaka kwekudhinda uye kunoita kuti printa irambe yakareba kwenguva refu.

• Printhead: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Chinotenderera Chinotenderera: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• Kunze: Pukuta kunze nekanyoro, damp jira. Usashandise abrasive cleaners.

6.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Kugadzirisa matambudziko

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Printer Haisi Kupindura:
  • Tarisa kubatana kwesimba.
  • Verify USB or LAN cable connections.
  • Restart the printer and computer.
  • Ensure printer drivers are correctly installed.
• Hunhu Husina Kudhinda:
  • Clean the printhead (refer to Section 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Zviratidzo Zvisingadyi Zvakanaka:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Check for any obstructions in the media path.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Zvinotsanangurwa

9. Warranty uye Tsigiro

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Mugadziri: Intermec
• Model Number: PC43TB01100201
• For technical assistance, visit the official Intermec support websaiti kana kubata basa ravo revatengi.