1. Safety Information
Operating a chainsaw can be dangerous if proper safety precautions are not followed. Always read and understand the entire instruction manual before operating the Stihl MS 201 TC-M chainsaw. Failure to follow safety instructions can result in serious injury or death.
Zvishandiso Zvekuzvidzivirira Pamunhu (PPE)
- Dziviriro yeMusoro: Wear a safety helmet with face and hearing protection.
- Kudzivirira Kweziso: Nguva dzose pfeka magirazi ekuchengetedza kana magirazi.
- Kudzivirirwa Nemaoko: Use heavy-duty work gloves.
- Leg Protection: Wear chainsaw protective trousers or chaps.
- Kudzivirirwa kwetsoka: Wear safety boots with steel toes and non-slip soles.
Fuel Handling Safety
- Always mix and handle fuel in a well-ventilated area, away from ignition sources.
- Shandisa midziyo yemafuta inotenderwa chete.
- Usapute paunenge uchiwedzera mafuta.
- Pukuta chero mafuta anenge adeuka nekukasika.
2. Chigadzirwa Pamusoroview
The Stihl MS 201 TC-M is a powerful and compact gasoline-powered chainsaw designed for professional tree care and pruning. It features a 35 cm cutting length and is equipped with advanced engine technology for efficient operation.
Mufananidzo 2.1: Kurutivi rwepamusoro view of the Stihl MS 201 TC-M chainsaw, highlighting the ergonomic handle and engine housing.
Mufananidzo 2.2: Rutivi view of the Stihl MS 201 TC-M chainsaw, showing the Stihl branding and engine components.
3. Setup
Kusunungura uye Assembly
- Nyatsobvisa zvese zvikamu kubva pakurongedza.
- Inspect for any shipping damage. If damaged, do not use and contact your dealer.
- Ensure all parts listed in the packing list are present.
Bar and Chain Installation
Proper installation of the guide bar and saw chain is crucial for safe and efficient operation.
- Iva nechokwadi chekuti bhureki recheni harina kuvharwa.
- Remove the chain sprocket cover by loosening the nuts.
- Isa bhaa rekutungamira pamusoro pema stud.
- Fit the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges face forward on the top of the bar.
- Replace the chain sprocket cover and hand-tighten the nuts. Do not fully tighten yet.
- Adjust chain tension (refer to 'Chain Tension Adjustment' in Section 5).
- Fully tighten the chain sprocket cover nuts.
Mufananidzo 3.1: Pedyo-kumusoro view of the chainsaw's chain and guide bar, illustrating proper assembly.
Fuel and Chain Oil Filling
The MS 201 TC-M operates on a gasoline-oil mixture and requires chain lubricant.
- Mafuta: Use a high-quality unleaded gasoline mixed with Stihl 2-stroke engine oil at the recommended ratio (typically 50:1). Refer to the fuel tank cap for specific ratios.
- Chain Oil: Fill the chain oil tank with high-quality bar and chain lubricant. Do not use waste oil.
Ensure both caps are securely tightened after filling.
4. Operating Instructions
Kutanga Chainsaw
- Place the chainsaw on a firm, level surface.
- Engage the chain brake by pushing the front hand guard forward.
- Set the master control lever to the cold start position (choke).
- Hold the chainsaw firmly with one hand on the front handle and place your foot on the rear handle.
- Pull the starter cord slowly until resistance is felt, then pull briskly until the engine fires briefly.
- Move the master control lever to the half-throttle position.
- Pull the starter cord again until the engine starts.
- Blip the throttle to disengage the half-throttle and return to idle.
- Bvisa bhureki recheni usati watanga kucheka.
Kumisa Chainsaw
To stop the engine, move the master control lever to the STOP position.
Chain Brake Operation
The chain brake is a critical safety feature. It can be engaged manually by pushing the front hand guard forward or automatically by inertia during kickback. Always ensure the chain brake is functional before each use.
5. Kuchengeta
Regular maintenance ensures the longevity and safe operation of your Stihl MS 201 TC-M chainsaw.
Chain Tension Adjustment
Correct chain tension is vital. A loose chain can derail, and an overly tight chain can cause premature wear to the bar and chain, and reduce engine power.
- Loosen the nuts on the chain sprocket cover.
- Using the tensioning screw, adjust the chain until it fits snugly against the underside of the guide bar, but can still be pulled around by hand.
- Lift the tip of the guide bar slightly while tightening the nuts on the chain sprocket cover.
- Check tension again.
Kurodza Cheni
A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or have it professionally sharpened.
Air Sefa Kuchenesa
Clean the air filter regularly to maintain engine performance and prevent damage. Remove the filter cover and clean the filter element with warm soapy water or compressed air. Replace if damaged.
Spark Plug Inspection
Inspect the spark plug for wear and proper gap. Replace if electrodes are worn or fouled. Refer to the specifications for the correct spark plug type and gap.
Guide Bar Maintenance
Regularly clean the guide bar groove and oil holes. Flip the guide bar periodically to ensure even wear.
6. Kugadzirisa matambudziko
This section addresses common issues you might encounter with your Stihl MS 201 TC-M chainsaw.
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Injini haina kutanga | Hapana mafuta, maitiro ekutanga asina kunaka, chivhariso chespark chakasviba, firita yemafuta yakavharwa. | Check fuel level, follow starting instructions, clean/replace spark plug, check fuel filter. |
| Engine runs, but chain does not move | Chain brake engaged, clutch issue. | Disengage chain brake. If problem persists, contact service. |
| Kuita kusina kunaka kwekucheka | Dull chain, incorrect chain tension, worn guide bar. | Sharpen chain, adjust chain tension, inspect/replace guide bar. |
| Kudedera kwakanyanyisa | Loose components, damaged chain/bar, engine issue. | Check all fasteners, inspect chain/bar for damage, contact service if engine related. |
7. Zvinotsanangurwa
Key technical specifications for the Stihl MS 201 TC-M chainsaw:
- Model Number: MS 201
- Kunobva Simba: peturu
- Kucheka Kureba: 35 cm
- Chinhu Weight: 3.85 kg (8.49 lbs)
- Zviyero zvechigadzirwa: 37 x 10 x 37 masendimita (14.57 x 3.94 x 14.57 inches)
- Material: Plastiki (dzimba)
- Mugadziri: STIHL
- GTIN (UPC): 00795711953546
8. Warranty uye Tsigiro
For warranty information, please refer to the warranty card included with your product or contact your authorized Stihl dealer. Keep your proof of purchase for warranty claims.
For technical support, spare parts, or service, please contact your local authorized Stihl service center. Only use genuine Stihl replacement parts and accessories.
