Bhuku rekushandisa reTOZO Q1012 X8tw Drone RC Quadcopter

1. Nhanganyaya

This manual provides detailed instructions for the safe operation and maintenance of your TOZO Q1012 X8tw RC Quadcopter. Please read this manual thoroughly before operating the drone to ensure proper function and to prevent damage or injury.

Image: The TOZO Q1012 X8tw drone, black in color, with its four propellers extended, viewed from above. The drone features a sleek design with a white stripe down the center.

2. Package Zviri mukati

Tarisa kuti zvinhu zvese zvakanyorwa pazasi zviripo mupakeji yako:

Mufananidzo: Kupfuuraview of the TOZO Q1012 X8tw drone's package contents, including the drone, remote transmitter, screws, battery, USB charging cable, spare propellers, screwdriver, phone holder, and the operation manual.

• TOZO Q1012 X8tw RC Quadcopter
• Remote Rinofambisa
• Rechargeable Drone Battery
• USB Kuchaja Cable
• Spare Propellers (set of 4)
• Screwdriver
• Phone Holder for Transmitter
• Bhuku reMirayiridzo
• Screws (for propeller attachment)

3. Zvigadzirwa zveChigadzirwa

• Yakagadzirwa Dhizaini: The drone arms can be folded for compact storage and portability.

  Image: Demonstrates the foldable design of the TOZO Q1012 X8tw drone, showing both its compact folded state (122x94x57mm) and its unfolded state (343x313x91mm) with propellers extended.
• Altitude Hold: Maintains a consistent altitude, simplifying flight control.
• Headless Mode: Eliminates the need to adjust the drone's position before flight, as the forward direction is relative to the pilot.

  Image: Illustrates the Headless Mode feature of the TOZO Q1012 X8tw drone, showing directional arrows indicating that the drone will move relative to the controller's orientation, regardless of the drone's front-facing direction.

• FPV (Munhu Wekutanga View) with WiFi 720P HD Camera: Stream live video to your smartphone via WiFi.
• 6-Axis Gyro: Provides stable flight and easy control.
• 3D 360-Degree Flips: Perform aerial stunts with a single button.
• 2.4Ghz 4-Channel Control: Ensures strong signal and precise control.

4. Mirayiridzo Yekuchengetedza

• Operate the drone in open areas, away from people, animals, and obstacles.
• Usabhururuke pedyo nenhandare dzendege kana nzvimbo ine miganhu yendege.
• Dzivisa kubhururuka nemhepo ine simba kana mamiriro ekunze asina kunaka.
• Chengetedza zvigunwe nevhudzi kure nemapropeller anotenderera.
• Ita shuwa kuti bhatiri rakazara zvakazara pamberi pese kubhururuka.
• Chengetedza vana panguva yekushanda kwedrone.
• Usagadzirise iyo drone kana zvikamu zvayo.

5. Setup

5.1 Drone Assembly

1. Unfold the Arms: Gently extend the four arms of the drone until they lock into position. Refer to the foldable design image in Section 3.
2. Isa maPropellers: Attach the propellers to the motor shafts, ensuring correct orientation (A and B propellers are typically marked and correspond to specific motor positions). Secure with screws if necessary.
3. Install Landing Gear: Attach the landing gear to the bottom of the drone.

5.2 Kuiswa kwebhatiri uye kuchaja

1. Bhatiri reDrone rekuchaja: Connect the drone battery to the USB charging cable, then plug the USB cable into a USB power source (e.g., computer, USB wall adapter). The indicator light will show charging status and turn off when fully charged.
2. Isa Drone Battery: Open the battery compartment on the drone and insert the fully charged battery. Connect the battery connector to the drone's power port. Close the compartment securely.
3. Isa mabhatiri eTransmitter: Open the battery compartment on the remote transmitter and insert 4x AAA batteries (not included), observing polarity. Close the compartment.

5.3 Transmitter Pamusoroview

Image: A detailed diagram of the TOZO Q1012 X8tw drone's remote transmitter, labeling various controls such as the LCD display, accelerator/left and right rotatory rocker, front rear left and right rocker, fine-tuning buttons, power switch, light switch, speed toggle, and automatic landing/emergency stop buttons.

• Chiratidziro cheLCD: Shows flight information.
• Left Stick (Accelerator/Left & Right Rotatory Rocker): Inodzora kukwirira (kumusoro/pasi) uye kutenderera (kuruboshwe/kurudyi).
• Right Stick (Front Rear Left & Right Rocker): Inodzora kumberi / kumashure uye kuruboshwe / kurudyi kufamba.
• Fine Tuning Buttons: Adjust drone drift for stable flight.
• Simba Chinja: Inobatidza / kudzima transmitter.
• Chiedza Controls drone LED lights.
• High/Intermediate/Low Speed Toggle: Changes flight speed.
• Automatic Landing Button: Press and hold for 2 seconds to initiate automatic landing.
• Emergency Stop: Press both bottom buttons simultaneously for emergency stop.

6. Operating Instructions

6.1 Pairing the Drone and Transmitter

1. Isa dhoni padenga rakatsetseka, rakaenzana pamusoro.
2. Batidza magetsi echi drone. Marambi echiratidzo cheiyo drone achapenya.
3. Turn on the transmitter's power switch.
4. Push the left throttle stick (accelerator) fully up, then pull it fully down. The drone lights will stop flashing and remain solid, indicating successful pairing.

6.2 Calibration

After pairing, perform a gyroscope calibration for stable flight:

1. Ensure the drone is on a flat surface.
2. Push both control sticks down and to the right simultaneously (as shown in step 3 of the "How to Take Off" image). The drone lights will flash rapidly and then become solid, indicating successful calibration.

6.3 How to Take Off

Image: A six-step visual guide demonstrating the take-off procedure for the TOZO Q1012 X8tw drone, including pushing the throttle up and down for pairing, calibrating by pushing both sticks down-right, unlocking by pushing both sticks down-left, and finally pushing the left stick up to take off.

1. Kubatanidza: Push the throttle lever up (1), then down (2).
2. Calibration: Push both control sticks down and to the right (3).
3. Kiinura: Push both control sticks down and to the left (4). The propellers will start spinning slowly.
4. Bvisa: Push the left throttle stick up to ascend (6).

6.4 Kudzora Kwendege

• Kukwira/Kudzika: Use the left stick (throttle) up or down.
• Pamberi/Kumashure: Use the right stick up or down.
• Tendeukira Kuruboshwe/Kurudyi (Yaw): Use the left stick left or right.
• Fly Left/Right (Roll): Use the right stick left or right.
• Altitude Hold: Once the drone reaches a desired altitude, release the left stick, and the drone will attempt to maintain that height.
• Headless Mode: Press the Headless Mode button (refer to transmitter diagram). The drone will orient itself relative to the pilot, regardless of its front direction. Press again to exit.
• 360-Degree Flips: Press the 3D Flip button, then push the right stick in the desired flip direction.

6.5 Kudzika

• Kudzika Nemaoko: Slowly pull the left throttle stick down until the drone lands.
• Automatic Kudzika: Press and hold the automatic landing button on the transmitter for 2 seconds. The drone will descend and land automatically.

6.6 FPV and Camera Operation (via Phone WiFi Direct Control)

Image: Displays two methods of controlling the TOZO Q1012 X8tw drone: via the included transmitter with a phone monitor attached, or directly via phone WiFi control using a compatible iOS/Android app. It also notes that data is stored directly on the phone, eliminating the need for a TF card.

1. Dhaunirodha App: Tsvaga the official TOZO drone app on your smartphone's app store (iOS/Android).
2. Batanidza kuDrone WiFi: Turn on the drone. On your smartphone, go to WiFi settings and connect to the drone's WiFi network (e.g., "TOZO-Q1012-XXXX").
3. Tanga App: Open the TOZO drone app. You should see a live FPV feed from the drone's camera.
4. Record Video/Take Photos: Use the controls within the app to start/stop video recording or take still photos. Captured media is stored directly on your phone.

7. Kuchengeta

• Kuchenesa: Shandisa jira rakapfava, rakaoma kuchenesa drone muviri uye kamera lens. Usashandise makemikari ane hasha kana zvinonyungudutsa.
• Kutsiva Propeller: If a propeller is damaged, replace it with a new one from the spare parts. Ensure the correct propeller type (A or B) is installed on the corresponding motor.
• Battery Care: Store batteries in a cool, dry place. Do not overcharge or over-discharge.
• Kuchengeta: When not in use for extended periods, remove batteries from both the drone and transmitter. Store the drone in a cool, dry environment.

8. Kugadzirisa matambudziko

• Drone not responding to transmitter:
  • Ensure both drone and transmitter are powered on.
  • Re-pair the drone and transmitter (Section 6.1).
  • Tarisa mabhatiri ekufambisa.
• Drone unstable during flight/drifting:
  • Perform gyroscope calibration (Section 6.2).
  • Use the fine-tuning buttons on the transmitter to correct drift.
  • Tarisa kana mapropeller akakuvara wobva waatsiva kana zvichidikanwa.
• No FPV feed on smartphone:
  • Ensure the drone's WiFi is enabled and your phone is connected to it.
  • Restart the drone and the app.
  • Check app permissions on your phone.
• Nguva pfupi yekubhururuka:
  • Ita shuwa kuti bhatiri re drone razara.
  • Battery life may decrease over time; consider replacing old batteries.

9. Zvinotsanangurwa

10. Warranty uye Tsigiro

TOZO products come with a standard warranty. For detailed warranty information, technical support, or replacement parts, please visit the official TOZO websaiti kana kubata basa ravo revatengi zvakananga.

Official TOZO Store: Visit the TOZO Store on Amazon