FAAC 390 Swing Gate Opener Basic Single Kit Instruction Manual

1. Nhanganyaya

This manual provides essential information for the installation, operation, and maintenance of the FAAC 390 Swing Gate Opener Basic Single Kit. The FAAC 390 is designed for residential swing gates, offering continuous duty operation for gates up to 600 lbs and 14 feet in length per leaf. It features a low-voltage design and includes provisions for optional battery backup to ensure functionality during power outages. Please read this manual thoroughly before proceeding with installation or operation.

2. Kit Zviri mukati

The FAAC 390 Swing Gate Opener Basic Single Kit includes the following components:

• FAAC 390 Swing Gate Operator
• FAAC E024U Control Board
• FAAC 787741 Receiver
• 14" x 16" Enclosure
• Transformer
• 2 FAAC XT4 Remotes
• 2 Batteries (for backup)
• 2 FAAC 785163 Photocells
• 2 Limit Swichi

Mufananidzo 1: Overview of the FAAC 390 Swing Gate Opener Basic Single Kit components. This image displays the main gate operator unit, the control board, receiver, two remote controls, two batteries, and two photocells, along with the enclosure and transformer.

3. Setup uye Kuiswa

The FAAC 390 is designed for straightforward installation, often requiring no gate modifications. However, professional installation is recommended to ensure proper functionality and safety. This section provides a general overview; always refer to the detailed installation guide provided with your kit for specific instructions and safety warnings.

1. Mounting the Operator: Securely mount the FAAC 390 Swing Gate Operator to the gate and post according to the detailed diagrams in the full installation manual. Ensure proper alignment for smooth gate movement.
2. Control Board and Enclosure: Install the FAAC E024U Control Board and transformer within the 14" x 16" enclosure. Mount the enclosure in a protected location near the gate.
3. Wiring Connections: Connect the gate operator, power supply, photocells, and limit switches to the E024U Control Board as specified in the wiring diagrams. Ensure all connections are secure and insulated.
4. Kuiswa kwePhotocell: Mount the FAAC 785163 Photocells at appropriate heights and distances to create a safety beam across the gate opening. Ensure they are aligned correctly.
5. Limit Swichi: Install and adjust the limit switches to define the open and closed positions of the gate.
6. Battery Backup: Connect the two provided batteries to the control board for power failure operation.
7. Receiver and Remotes: Install the FAAC 787741 Receiver and program the FAAC XT4 Remotes according to the instructions for wireless control.

4. Operating Instructions

Once installed and configured, the FAAC 390 Swing Gate Opener is designed for simple operation.

• Remote Control: Use the FAAC XT4 Remotes to open and close the gate. Pressing the designated button will initiate the gate's movement. A second press may stop or reverse the gate, depending on the control board's programming.
• Safety Features: The photocells are designed to detect obstructions in the gate's path. If the beam is broken during closing, the gate will stop or reverse to prevent impact.
• Power Failure Operation: Pakaitika simba outage, the optional battery backup system will automatically engage, allowing continued operation of the gate for a limited number of cycles. Ensure batteries are charged and properly connected.

5. Kuchengeta

Regular maintenance ensures the longevity and reliable operation of your FAAC 390 Swing Gate Opener. Perform the following checks periodically:

• Visual Inspection: Check for any signs of wear, damage, or corrosion on the gate operator, mounting hardware, and wiring.
• Kufamba kweGedhi: Observe the gate's movement for smoothness and consistency. Address any unusual noises or jerky movements.
• Photocells: Ensure photocells are clean and properly aligned. Clear any obstructions that might block the safety beam.
• Kutarisa Battery: If using battery backup, periodically check the battery terminals for corrosion and ensure they are securely connected. Test the battery backup functionality by temporarily disconnecting main power.
• Lubrication: Consult the full installation manual for any recommended lubrication points on the mechanical components of the gate operator.

6. Kugadzirisa matambudziko

This section addresses common issues you might encounter. For complex problems, contact qualified technical support.

• Gedhi Risingapindure: Check power supply, remote control batteries, and ensure the receiver is properly connected and programmed. Verify photocells are not obstructed.
• Kumira kweGedhi Pakati peCycle: This could indicate an obstruction detected by photocells or an issue with limit switch settings. Check for physical obstructions and verify limit switch calibration.
• Ruzha rusina kujairika: Inspect mechanical components for wear or misalignment. Ensure all moving parts are free from debris.
• Battery Backup Not Working: Check battery connections, charge level, and ensure batteries are not expired.

7. Zvinotsanangurwa

8. Warranty uye Tsigiro

For warranty information, technical support, or to purchase replacement parts, please contact FAAC customer service or refer to the official FAAC website. Keep your purchase receipt and product model number handy when contacting support.