1. Nhanganyaya
This manual provides detailed instructions for the installation, operation, and troubleshooting of the avedio links HDMI Extender. This device allows for the extension of HDMI audio and video signals over a single Cat5e/6/7 Ethernet cable, supporting resolutions up to 1080P Full HD and 3D, over distances up to 196 feet (60 meters).
The extender consists of a Transmitter (TX) unit and a Receiver (RX) unit, designed for reliable signal transmission in various environments such as home entertainment, digital signage, and conference rooms.
2. Package Zviri mukati
- 1x HDMI Extender Transmitter (TX) Unit
- 1x HDMI Extender Receiver (RX) Unit
- 2x DC 5V Power Adapters
- 1x Chinyorwa cheMushandisi
Ensure all items are present and undamaged. Contact customer support if any components are missing or faulty.
3. Zvigadzirwa zveChigadzirwa
- Extends HDMI signal up to 196 feet (60 meters) using a single Cat6/7 cable.
- Supports Cat5e cable up to 165 feet (50 meters).
- Supports Full HD 1080P resolution (1920x1080@60Hz) and 3D.
- Compatible with HDMI 1.4a and HDCP 1.4.
- Supports deep color up to 36 bits.
- Supports uncompressed digital audio formats including DTS-HD, Dolby TrueHD, DTS, Dolby-AC3, and DSD.
- Features EDID copy/reset functionality for display compatibility.
- Plug and play operation, no driver installation required.
- Built-in automatic adjustment system for stable signal transmission.
4. Component Identification
4.1 Chiteshi cheTransmitter (TX)
- Mamiriro akatungamira: Indicates power and signal status.
- HDMI Inzwa Zvinotaurwa: Connects to the HDMI source device.
- DC/5V: Simba rekuisa chiteshi.
- EDID Bhatani: For EDID management.
- CAT5e/6/7 Output (RJ45): Connects to the Receiver unit via Ethernet cable.
4.2 Chigadziko cheMugamuchiri (RX)
- Mamiriro akatungamira: Indicates power and signal status.
- HDMI Output: Connects to the HDMI display device.
- DC/5V: Simba rekuisa chiteshi.
- CAT5e/6/7 Input (RJ45): Connects to the Transmitter unit via Ethernet cable.
5. Setup Instructions
Follow these steps to set up your avedio links HDMI Extender:
- Power Off Devices: Ensure all HDMI source devices (e.g., PC, Blu-ray player, Fire Stick) and display devices (e.g., HDTV, projector) are powered off before making connections.
- Connect HDMI Source to TX: Use a high-quality HDMI cable to connect your HDMI source device to the HDMI Inzwa Zvinotaurwa chiteshi chiri pachikamu cheTransmitter (TX).
- Connect TX to RX via Ethernet: Connect one end of a Cat5e/6/7 Ethernet cable to the CAT5e/6/7 Output (RJ45) port on the Transmitter (TX) unit. Connect the other end of the Ethernet cable to the CAT5e/6/7 Input (RJ45) chiteshi pachikamu cheReceiver (RX).
- For optimal performance, a Cat6 or Cat7 cable is recommended.
- Maximum length for Cat6/7 is 196 feet (60 meters).
- Maximum length for Cat5e is 165 feet (50 meters).
- Avoid using flat Ethernet cables or Cat5 cables, as they may not provide stable transmission.
- Connect RX to HDMI Display: Use a high-quality HDMI cable to connect your HDMI display device to the HDMI Output chiteshi pachikamu cheReceiver (RX).
- Shandisa Simba: Connect the included DC 5V power adapters to the DC/5V ports on both the Transmitter (TX) and Receiver (RX) units. Plug the power adapters into a power outlet. The Status LEDs on both units should illuminate.
- Simba Pamidziyo: Power on your HDMI display device first, then power on your HDMI source device. The video and audio signal should now be extended to your display.
6. EDID Management
The EDID (Extended Display Identification Data) function ensures compatibility between the source and display devices. The avedio links HDMI Extender features an EDID button on the Transmitter (TX) unit for managing display information.
- EDID Copy Mode:
- Connect your primary display directly to the HDMI source device.
- Connect the HDMI Extender as described in Section 5, ensuring the display is connected to the RX unit's HDMI output.
- With all devices powered on and a signal present, press the EDID bhatani on the Transmitter (TX) unit once. The extender will copy the EDID information from the connected display to ensure optimal compatibility.
- EDID Reset Mode:
- If you encounter display issues or wish to revert to a default EDID setting, press and hold the EDID bhatani on the Transmitter (TX) unit for 3 seconds. This will reset the EDID to a default 1080p 3D stereo setting.
7. Kugadzirisa matambudziko
If you experience issues with the HDMI Extender, refer to the following troubleshooting steps:
- No Picture or Signal:
- Ensure both the TX and RX units are powered on and their Status LEDs are illuminated.
- Verify all HDMI and Ethernet cables are securely connected.
- Test the HDMI cables directly between the source and display to confirm they are functional.
- Ensure the Ethernet cable is a Cat5e, Cat6, or Cat7 cable and is within the recommended length limits (165ft for Cat5e, 196ft for Cat6/7). Avoid Cat5 cables.
- Try a different Ethernet cable, preferably a high-quality Cat6 or Cat7 UTP cable. Flat cables may cause issues.
- Perform an EDID copy (refer to Section 6) to ensure compatibility with your display.
- Try resetting the EDID to default (refer to Section 6).
- Power cycle all devices (source, extender units, display) in the correct order: display first, then source.
- Chiratidzo Chinopenya kana Chinopindira:
- This often indicates a poor quality or excessively long Ethernet cable. Replace the Ethernet cable with a shorter, higher-quality Cat6 or Cat7 cable.
- Ensure there are no strong electromagnetic interference sources near the Ethernet cable.
- Check power connections for stability.
- Hapana Audio:
- Simbisa marongero enzwi pamudziyo wako wekutanga uye pachiratidziro.
- Iva nechokwadi chekuti tambo dzeHDMI dzinotsigira kutumirwa kwenzwi.
- Perform an EDID copy or reset.
- Picture Quality Issues (e.g., blurry, color distortion):
- Check the resolution settings on your source device. Ensure it is compatible with the extender and display.
- Use shorter, higher-quality HDMI and Ethernet cables.
8. Zvinotsanangurwa
| Feature | Tsanangudzo |
|---|---|
| HDMI Version | HDMI 1.4a |
| HDCP Shanduro | HDCP 1.4 |
| Zvinotsigirwa Zvisarudzo | 1080p/1080i/720p/576p/576i/480p/480i (24/50/60fs) |
| 3D Tsigiro | Ehe |
| Yakadzika Ruvara Rutsigiro | 36 zvishoma |
| Max Transmission Bandwidth | 6.75 Gbps |
| Inotsigirwa Audio Formats | DTS-HD/Dolby-chokwadi HD/DTS/Dolby-AC3/DSD |
| Ethernet Cable Requirement | Cat5e/6/7 (UTP recommended) |
| Max Extension Distance (Cat5e) | 165 tsoka (50 m) |
| Max Extension Distance (Cat6/7) | 196 tsoka (60 m) |
| Input/Output HDMI Cable Distance | Up to 49 feet (15 meters) AWG26 HDMI standard cable |
| Magetsi | DC 5V/1A (2 units included) |
| Operating Temperature | 0°C kusvika 40°C (32°F kusvika 104°F) |
| Kushanda Humidity | 5% kusvika 90% RH (isina-condensing) |
| Zviyero (chikamu chimwe nechimwe) | Anenge 5.31 x 3.94 x 2.76 inches (Package Dimensions) |
| Kurema (chikamu chimwe nechimwe) | Inenge 8.8 ounces (Kurema kweChinhu) |
9. Safety Information
- Usafumure chikamu ichi kumvura, hunyoro, kana hunyoro hwakanyanya.
- Usaisa chikwata muzuva rakananga kana pedyo nekupisa.
- Use only the provided power adapters. Using unauthorized power adapters may damage the device and void the warranty.
- Usaedza kuvhura kana kugadzirisa mudziyo wega. Tumira mabasa ese ekugadzirisa kune vashandi vane hunyanzvi.
- Chengetedza mudziyo kure nevana.
- Iva nechokwadi chekuti mhepo inofefetera zvakanaka kumativi ese emidziyo kudzivirira kupisa zvakanyanya.
10. Mutengi Tsigiro
For technical assistance or product inquiries, please contact avedio links customer support. Refer to the product packaging or the official avedio links websaiti yeruzivo rwekusangana.
Please have your product model number (HDMI Extender 196FT) and purchase details ready when contacting support.
