1. Nhanganyaya
Ndatenda nekutengaasing the Project Source 2-Pack 13-inch Bronze Flush Mount Light fixtures. These fixtures are designed to provide ambient lighting with a traditional aesthetic, featuring a durable bronze finish and an elegant alabaster glass shade. They are suitable for various indoor spaces, including bathrooms, bedrooms, kitchens, dining rooms, and living rooms, enhancing the decor while providing reliable illumination.
Mufananidzo 1: Two Project Source 13-inch Bronze Flush Mount Light fixtures. Each fixture features a round bronze base and a dome-shaped alabaster glass shade, secured by a small finial at the bottom center of the shade.
2. Ruzivo Rwakakosha Chekuchengetedza
YAMBIRO: Njodzi yeKuvhunduka Kwemagetsi. Bvisa magetsi pabhokisi refuse kana circuit breaker usati waisa kana kugadzirisa.
- Verenga mirairo yose zvakanaka usati watanga kuisa.
- Kubatanidza magetsi kwese kunofanirwa kuenderana nemutemo wemunharaunda, mitemo, kana National Electric Code (NEC). Bvunza nyanzvi yemagetsi kana usingazive kubatana kwakakodzera kwewaya dzemagetsi.
- Use only UL-listed wire connectors for the electrical connections.
- Usapfuure iyo yakanyanya wattage specified for this fixture (14 Watts per bulb).
- Wear safety glasses and appropriate protective gear during installation.
- Ita shuwa kuti chigadziriso chakanyatsogadziriswa.
3. Package Zviri mukati
Tarisa kuti zvese zviriko zviripo usati watanga kuisa:
- 2 x 13-inch Bronze Flush Mount Light Fixtures (with alabaster glass shades)
- Zvishandiso zvekuisa (zvikushi, nzungu dzewaya, chivharo chekuisa)
- Note: Light bulbs are NOT included.
4. Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Brand | Project Source |
| Model Number | 40804 |
| Dimensions (Width x Height) | 13 inches x 5.36 inches |
| Finish | Bronze |
| Shade Material | Alabaster Girazi |
| Nhamba Yemwenje | 2 per fixture |
| Bulb Base Type | Medium base (E-26) |
| Yakakurudzirwa Bulb Shape | A15 |
| Maximum Bulb Wattage | 14 Watts (per bulb) |
| Kuchengetedza Kunyorera | UL Yakanyorwa |
| Room Kugarisana | Bathroom, Bedroom, Kitchen, Dining Room, Living Room |
| Installation Type | Flush Gomo |
| Kurema kwechinhu (Pakeji) | 7.04 makirogiramu |
5. Setup uye Kuiswa
Zvishandiso Zvinodiwa: Phillips head screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.
Pre-Instalation Matanho:
- Dzima simba: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the power completely before proceeding.
- Gadzirira nzvimbo: Clear the work area and ensure you have stable footing if using a ladder.
- Bvisa zvinhu: Carefully remove the fixture and all components from the packaging.
Kuisa Matanho:
- Batanidza Mounting Bracket: Secure the mounting bracket (included) to the electrical junction box in the ceiling using the provided screws. Ensure it is firmly attached.
- Batanidza Waya dzeMagetsi:
- Batanidza iyo nhema (hot) wire from the ceiling to the nhema wire of the fixture using a wire nut.
- Batanidza iyo chena (neutral) wire from the ceiling to the chena wire of the fixture using a wire nut.
- Batanidza iyo pasi wire (bare copper or green) from the ceiling to the pasi wire of the fixture (or the ground screw on the mounting bracket) using a wire nut or by wrapping it securely around the screw.
- Chigadziko Chakachengeteka paBracket Yekukwira: Carefully push the wired fixture up towards the ceiling, aligning the holes in the fixture base with the screws on the mounting bracket. Secure the fixture in place with the decorative nuts or screws provided.
- Isa Mwenje Marubhu: Insert the recommended A15 shape, E-26 medium base light bulbs (not included) into the sockets. Do not exceed 14 Watts per bulb.
- Batanidza Glass Shade: Carefully place the alabaster glass shade onto the fixture. Secure it in place using the finial or retaining ring provided, tightening it gently until snug. Do not overtighten.
- Dzosera Simba: Kana kuiswa kwapera uye zvese zvinongedzo zvakachengeteka, dzosera simba pane redunhu breaker.
6. Operating Instructions
Once the Project Source Flush Mount Light fixtures are correctly installed and power is restored, they can be operated using the standard wall switch connected to the circuit. Simply toggle the wall switch to turn the lights on or off.
7. Kuchengeta uye Kuchengetedza
Regular cleaning will help maintain the appearance and performance of your light fixtures.
- Cleaning the Fixture: Dust the bronze finish regularly with a soft, dry cloth. For more thorough cleaning, wipe the bronze finish with a damp cloth and a mild, non-abrasive soap solution, then dry immediately with a clean, soft cloth to prevent water spots.
- Cleaning the Glass Shade: The alabaster glass shade can be removed for cleaning. Wash it with mild soap and water, then rinse thoroughly and dry completely before reattaching to the fixture.
- Bulb Replacement: Always ensure the power is turned off at the circuit breaker and the bulbs have cooled down before attempting to replace them. Use only bulbs that meet the specified wattage uye base mhando.
- Do not use abrasive cleaners, solvents, or polishes on any part of the fixture, as they may damage the finish or glass.
8. Kugadzirisa matambudziko
Kana ukasangana nematambudziko nemwenje wako, tarisa matambudziko akajairika nemhinduro dzinotevera:
- Chiedza hachibatiki:
- Tarisa kuti magetsi ari kushanda pa circuit breaker.
- Ensure the light bulbs are correctly installed and are not burnt out. Try replacing with a known working bulb.
- Verify that all wire connections (black to black, white to white, ground) are secure and properly connected.
- Zviedza zvinopenya:
- Ensure the light bulbs are fully tightened in their sockets.
- Check for any loose wire connections within the fixture or junction box.
- Confirm that the bulbs used are compatible with the fixture and are not exceeding the maximum wattage.
- Glass shade is loose or wobbles:
- Gently tighten the finial or retaining ring that secures the glass shade. Do not overtighten.
If the problem persists after attempting these solutions, please consult a qualified electrician or contact customer support.
9. Warranty uye Customer Support
For detailed warranty information regarding your Project Source 2-Pack 13-in W Bronze Flush Mount Light, please refer to the documentation included with your original purchase. Warranty terms typically cover defects in materials and workmanship for a specified period.
If you require technical assistance, have questions about installation, or need to report a defect, please contact Project Source customer service directly through their official website or the contact information provided in your product packaging. Please have your model number (40804) and purchase details ready when contacting support.
