Nhanganyaya
Thank you for choosing the Project Source 2-Pack 7.4-in W White LED Flush Mount Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.
These LED flush mount ceiling lights are designed for both indoor and outdoor living spaces, featuring a wet-rated design. They are Energy Star rated for efficiency, provide a color temperature of 3000K, a Color Rendering Index (CRI) of 90, and an output of 730 lumens.
Safety Information
Gara uchitevera matanho ekutanga ekuchengetedza paunenge uchiisa kana kushanda nemagetsi kuti uderedze njodzi yemoto, kuvhunduka kwemagetsi, kana kukuvara kwemunhu.
- YAMBIRO: Ngozi yemagetsi. Bvisa magetsi pafiyuzi kana dunhu rinotyora usati waisa kana kusevhisi.
- YAMBIRO: Risk of fire. Use only in circuits rated for the fixture.
- Bvunza nyanzvi yemagetsi kana usina chokwadi nezve maitirwo ekuisa.
- Usashandura chigadziriso nenzira ipi zvayo. Chero shanduko inogona kukanganisa waranti uye kugadzira njodzi yekuchengetedza.
- Ita shuwa kuti zvese zvinongedzo zvakachengeteka uye zvakavharirwa nemazvo.
- Do not install near heat sources or in areas with excessive moisture beyond its wet-rated capabilities.
- This product is designed for direct wire connection and does not use a plug.
Chii chiri muBhokisi
Tarisa kuti zvese zviriko zviripo usati watanga kuisa:
- 2 x Project Source 7.4-in LED Flush Mount Light Fixtures
- Mounting Hardware
- Remote Kudzora (Note: While the product data mentions a remote control, typical flush mount lights of this type do not include one. Please verify your specific package contents.)
Kugadzika (Kuisa)
Installation should be performed by a qualified individual. Always ensure power is disconnected at the circuit breaker before starting.
- Dzima Simba: Locate the circuit breaker controlling the light fixture's location and turn it off. Verify power is off using a voltage muedzo.
- Gadzirira Mounting Surface: Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
- Batanidza Waya: Connect the fixture's wires to the corresponding house wires using wire nuts (typically black to black, white to white, and ground to ground). Ensure all connections are tight and secure.
- Mount Fixture: Carefully align the fixture with the mounting holes on the electrical box and secure it using the provided mounting hardware.
- Dzosera Simba: Kana chinhu chacho chaiswa zvakanaka, dzorera simba pa circuit breaker.
Image: Two Project Source 7.4-inch white LED flush mount ceiling lights, showcasing their compact and low-profile design suitable for various indoor and outdoor applications.
Operating Instruction
The Project Source LED Flush Mount Light operates like a standard ceiling light fixture. Once properly installed and power is restored, it can be controlled via a standard wall switch.
- Kubatidza/Kudzima: Tenderedza switch yemadziro yakabatana nechinhu kuti ubate kana kudzima mwenje.
- Kushanda Kwesimba: As an Energy Star rated LED fixture, it consumes significantly less energy than traditional incandescent bulbs, providing long-term savings.
Maintenance
These LED fixtures require minimal maintenance due to their long lifespan. However, occasional cleaning is recommended to maintain optimal light output and appearance.
- Kuchenesa: Iva nechokwadi chekuti magetsi adzima usati wageza. Shandisa jira rakapfava, rakaoma, kana kuti rakapfava zvishoma.amp cloth to wipe the surface of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Kureba kwe LED: The integrated LED light source is designed for long-term use and is not user-replaceable. If the LED fails, the entire fixture typically requires replacement.
Kugadzirisa matambudziko
Kana ukasangana nematambudziko nemwenje wako, tarisa matambudziko akajairika nemhinduro dzinotevera:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Chiedza hachibatidze. | No power to the fixture; loose wiring; faulty switch. | Tarisa chinopwanya dunhu. Iva nechokwadi chekuti waya dzese dzakabatana dzakachengeteka. Edza switch yemadziro. |
| Chiedza chinopenya. | Loose wiring; incompatible dimmer switch (if applicable); power fluctuations. | Verify wire connections. Ensure the fixture is not connected to an incompatible dimmer. Consult an electrician for power issues. |
| Kubuda kwechiedza kwakaderera kana kuti hakuchinji. | Dust accumulation on diffuser; aging LED components. | Clean the diffuser. If the issue persists and the fixture is old, it may be reaching the end of its lifespan. |
| Chigadzirwa chinoita ruzha rukuru. | Loose mounting; electrical interference. | Ensure fixture is securely mounted. Consult an electrician if noise persists. |
Zvinotsanangurwa
- Model Number: CLL56-2WW
- Zviyero zvechigadzirwa: 7.4 x 7.4 x 1.4 inches
- Kurema 2.15 Pounds (per pack, total for 2 lights)
- Brand: Project Source
- Ruvara: Chena
- Light Fixture Fomu: Ceiling (Flush Mount)
- Kushandiswa Kwemukati/Kunze: Indoor/Outdoor (Wet Rated)
- Kunobva Simba: Magetsi Ane Cord (Waya Yakananga)
- Light Output: 730 Lumens
- Ruvara Tembiricha: 3000K
- Ruvara Rendering Index (CRI): 90
- Simba reMagetsi: Energy Star
Warranty uye Support
Project Source products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please contact Project Source customer service. Keep your purchase receipt as proof of purchase.
For assistance, please refer to the contact information provided on the product packaging or the official Project Source website.
