1. Nhanganyaya
Thank you for choosing the Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Mirayiridzo Yekuchengetedza
- Kuchengetedzwa Kwemagetsi: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
- Kushandiswa Kwekunze: This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and against splashing water from any direction. It is designed for outdoor use only.
- Bhabhu Type: Use only R7s halogen bulbs with a maximum wattage ye150W. Inodarika wat yepamusorotagzvinogona kukonzera kupisa zvakanyanya uye kukuvara kwechigadzirwa kana kukonzera njodzi yemoto.
- Kubata: Do not touch the halogen bulb with bare hands during installation or replacement, as oils from your skin can cause premature failure. Use a clean cloth or gloves.
- Kukwidza: Iva nechokwadi chekuti nzvimbo yekuisira yakasimba uye inogona kutsigira huremu hwechinhu chacho.
3. Package Zviri mukati
Ndokumbira utarise kuti zvikamu zvese zviripo uye hazvina kukuvara:
- Brilliant Tanko 96162/06 Outdoor Wall Light Unit with Motion Sensor
- Zvishandiso zvekuisa (zvikushi, mapulagi emadziro)
- Chinyorwa Chirairo (gwaro iri)
Note: R7s bulb is typically not included and must be purchased separately.
4. Setup uye Kuiswa
Usati watanga: Ita shuwa kuti magetsi enzvimbo yekuisa akadzimwa pane main circuit breaker.
- Gadzirira Mounting Surface: Choose a suitable wall location for the fixture. Mark the drilling points for the mounting bracket.
- Mount the Bracket: Drill holes at the marked points and insert the wall plugs. Secure the mounting bracket to the wall using the provided screws.
- Wiring: Connect the electrical supply wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. Secure all connections tightly.
- Isa Bulb: Carefully insert an R7s halogen bulb (max 150W) into the bulb holder. Avoid touching the glass part of the bulb with bare hands.
- Batanidza Fixture: Secure the main light unit to the mounted bracket. Ensure it is firmly attached and sealed against the wall to maintain its IP44 rating.
- Adjust Sensor and Light Head: The motion sensor and light head are adjustable. Position them to cover the desired detection area and illumination direction.
Figure 4.1: Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This image shows the complete fixture, including the main light housing and the adjustable motion sensor unit mounted below it.
Mufananidzo 4.2: Pedyo-kumusoro view of the R7s bulb socket within the Brilliant Tanko fixture. This illustrates where the R7s halogen bulb should be inserted.
5. Operating Instructions
Once installed and power is restored, the Brilliant Tanko 96162/06 will operate as follows:
- Kuonekwa Kwekufamba: The integrated motion sensor detects movement within its adjustable range. When motion is detected, the light will automatically turn on.
- Chiedza Nguva: The light will remain on for a set period after motion is detected. This duration is typically adjustable via controls on the sensor unit (refer to specific markings on your sensor for adjustment dials for 'TIME' and 'LUX' settings, if present).
- Ambient Light Sensor (LUX): The sensor also includes an ambient light sensor. This prevents the light from activating during daylight hours, saving energy. The sensitivity of this sensor can often be adjusted to determine at what level of darkness the motion sensor becomes active.
6. Kuchengeta
- Kuchenesa: Kuti uchenese chinhu chacho, iva nechokwadi chekuti magetsi adzima. Pukuta nechinhu chakapfava, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or sensor.
- Bulb Replacement: Always disconnect power before replacing the bulb. Allow the old bulb to cool completely. Carefully remove the old R7s bulb and insert a new R7s bulb (max 150W), avoiding direct contact with the glass.
- Kuongorora: Nguva nenguva ongorora gadziriso kuona chero zviratidzo zvekukuvadzwa, kusununguka kunongedzo, kana kupfeka. Kana paine nyaya dzawanikwa, bvisa simba uye bvunza nyanzvi yemagetsi.
7. Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Chiedza hachibatidze. | No power supply. Blown bulb. Faulty wiring. Ambient light too high. | Check circuit breaker. Replace bulb. Verify wiring connections (consult electrician). Adjust LUX setting on sensor. |
| Chiedza chinoramba chiripo. | Continuous motion detected. Sensor faulty. Wiring error. | Adjust sensor angle/sensitivity. Check for obstructions. Consult electrician. |
| Light turns on randomly. | Sensor too sensitive. Environmental factors (wind, animals). | Reduce sensor sensitivity. Re-position sensor to avoid unwanted triggers. |
| Chiedza chinopenya. | Loose bulb. Incorrect bulb type. Power fluctuations. | Ensure bulb is seated correctly. Verify R7s 150W bulb. Consult electrician for power issues. |
8. Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Brand | Brilliant |
| Model Number | 96162/06 |
| Zviyero zveChigadzirwa (L x W x H) | 14 x 21 x 22 cm |
| Item Weight | 521 magiramu |
| IP Rating | IP44 |
| Style | Mazuvano |
| Color | Nhema |
| Material | Metal, Girazi |
| Nhamba yeMabhuru | 1 |
| Voltage | 230 Volts |
| Mashandisirwo Akananga | Kushandisa kunze chete |
| Special Features | Adjustable (sensor/light head) |
| Cap Type | MaR7s |
| Max Wattage | 150W |
| Simba Source | Electrical Cable (Wired) |
| Installation Type | Kuiswa Kwemadziro |
| Simba Label | A+ to E (for compatible bulbs) |
Figure 8.1: Energy label for the Brilliant Tanko 96162/06, indicating compatibility with bulbs from energy classes A++ to E.
9. Warranty uye Tsigiro
Information regarding specific warranty terms and spare parts availability for the Brilliant Tanko 96162/06 is not provided in the product data. For warranty claims, technical support, or inquiries about spare parts, please contact the retailer where you purchased the product or the manufacturer directly. Always have your proof of purchase and model number (96162/06) available when contacting support.
