1. Nhanganyaya
The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.
2. Zvigadzirwa zveChigadzirwa
- Kukodzera Kwose: Controls a wide range of devices.
- Basa reKuzvidzidzira: Easily acquires commands from existing remote controls.
- Two-Device Control: Manages up to two separate electronic devices.
- Mabhatani Makuru: Designed with oversized, clearly marked buttons for enhanced usability.
- Intuitive Design: Simple layout for straightforward operation.
- Quick Programming: Learning process typically takes less than one minute per button.
3. Setup
3.1. Kuiswa kwebhatiri
The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.
- Tsvaga chivharo chebhatiri kuseri kweremote control.
- Slide the cover downwards or press the latch and lift to open.
- Isa mabhatiri maviri eAAA, uchiona kuti materminal ari positive (+) uye negative (-) anoenderana nemakangwa ari mukati mekamuri.
- Chinja chifukidziro chebhatiri, uchichidzosera panzvimbo yacho kusvika chadzvanya zvakanaka.
Image: Back of the remote control, indicating the battery compartment.
3.2. Learning Function Programming
The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.
- Prepare Remotes: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
- Enter Learning Mode: Dzvanya uye ubate iyo SIMBA button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
- Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
- Select Button to Learn: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
- Chiratidzo chekutumira: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
- Dzokorora kune Mamwe Mabhatani: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
- Exit Learning Mode: Once all desired buttons are programmed, press the SIMBA button on the Simply remote again to exit learning mode. The indicator light will turn off.
Cherechedza: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.
Mufananidzo: Mberi view of the Simply SUPTLB001 remote control.
4. Operating Instructions
After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.
- Sarudzo Yemudziyo: Press the A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
- Batidza/Kudzima: Press the SIMBA bhatani rekubatidza kana kudzima mudziyo wakasarudzwa.
- Kudzora inzwi: Shandisa iyo V+ bhatani rekuwedzera vhoriyamu uye V- kudzikisa vhoriyamu.
- Program/Channel Control: Shandisa iyo P+ button to go to the next program/channel and P- to go to the previous program/channel.
- AV Input: Press the AV button to switch between video input sources on your television.
The functionality of each button depends on how it was programmed during the learning process.
5. Kuchengeta
- Kuchenesa: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
- Kutsiva Bhatiri: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
- Kuchengeta: Chengetedza remote panzvimbo yakaoma, kure nechiedza chezuva uye tembiricha yakanyanyisa.
6. Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Remote haishande. | Mabhatiri akafa kana kuiswa zvisizvo. | Tsiva mabhatiri nemabhatiri matsva eAAA, kuve nechokwadi chekuti polarity iripo. |
| Learning function fails (indicator light flashes rapidly and turns off). | Remotes not aligned, too far apart, or original remote signal is weak. | Ensure remotes are 1-3 cm apart and IR emitters are aligned. Press and hold the original remote button firmly. Try again. |
| Programmed button does not control the device. | Button was not programmed correctly or device selection is wrong. | Re-program the button following the learning instructions. Ensure you have selected the correct device (A or B) before attempting to control it. |
| Remote range haina kunaka. | Low batteries or obstruction between remote and device. | Replace batteries. Ensure a clear line of sight between the remote and the device's IR receiver. |
7. Zvinotsanangurwa
| Brand | Zvemagetsi Zvepamusoro |
| Model Name | Simply |
| Model Number | SUPTLB001 |
| Color | Nhema |
| Kubatana Technology | Infrared (IR) Learning Function |
| Inowirirana Devices | Television, other IR-controlled devices |
| Maximum Devices Supported | 2 |
| Nhamba yeMabhatani | 10 (Power, A, B, AV, V+, V-, P+, P-) |
| Bhatiri Type | 2 x AAA (not rechargeable) |
| Maximum Range | Mamita gumi (anenge mamita makumi matatu nematatu) |
| Dimensions (Approx.) | 16.5 cm (Kureba) x 4.5 cm (Kureba) |
Mufananidzo: Side view of the remote control with approximate dimensions.
8. Warranty uye Tsigiro
This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2 years kubva pazuva rekutenga.
For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics website. Ndapota chengetedza humbowo hwako hwekutenga kuti usimbise waranti.
