Ozito Power X Change 18V Cordless Drill Driver

Nhanganyaya

Thank you for choosing the Ozito Power X Change 18V Cordless Drill Driver. This tool is designed for versatility, allowing you to perform both drilling and screw driving tasks with ease. It is part of the Power X Change cordless system, which means its battery is interchangeable with other Ozito and Einhell tools in the range. This manual provides essential information for safe operation, proper setup, and effective use of your new drill driver.

Safety Information

Gara uchicherechedza matanho ekuchengetedza ekuchengetedza paunenge uchishandisa maturusi emagetsi kuderedza njodzi yemoto, kuvhunduka kwemagetsi, uye kukuvara kwako. Verenga mirayiridzo yose zvakanyatsonaka usati washanda.

• Kuchengetedzwa Kwenzvimbo Yebasa: Chengeta nzvimbo yako yebasa yakachena uye ine chiedza chakanaka. Nzvimbo dzakatsvikinyidzana kana dzine rima dzinokoka tsaona. Usashandise maturusi emagetsi munzvimbo dzinoputika, sekunge paine zvinwiwa zvinobvira moto, magasi, kana huruva.
• Kuchengetedzwa Kwemagetsi: Dzivisa kusangana nemuviri nezvinhu zvakasvibiswa kana pasi pevhu (semuenzaniso, mapaipi, ma radiator, ma ranges, mafiriji). Usaisa maturusi emagetsi munzvimbo dzine mvura kana dzakanyorova.
• Kuchengeteka Kwemunhu: Pfekai dziviriro yemaziso nguva dzose. Shandisa dziviriro yekunzwa kana muchivhiya kwenguva yakareba. Pfekai zvakanaka; musapfeka mbatya dzisina kusimba kana zvishongo. Chengetai bvudzi, mbatya, nemagirovhosi kure nezvinhu zvinofamba.
• Kushandisa uye Kuchengeta Chishandiso: Usamanikidza mudziyo wemagetsi. Shandisa simba rekushandisa rakakodzera pakushandisa kwako. Bvisa plug kubva pamagetsi emagetsi uye/kana bhatiri paki kubva pachishandiso chemagetsi usati waita chero zvigadziriso, kushandura zvinhu, kana kuchengetedza maturusi emagetsi.
• Battery Tool Kushandisa uye Kuchengeta: Recharge chete nechaja yakataurwa nemugadziri. Shandisa maturusi emagetsi chete nemapaketi ebhatiri akanyatsotarwa.

Product Overview

The Ozito PXDDS-201U is an 18V cordless drill driver designed for a variety of tasks. Key features include:

• Power X Change Compatibility: Shares battery compatibility with all Power X Change tools from Ozito and Einhell.
• 13mm Keyless Chuck: Allows for quick and easy bit changes with a single sleeve design for one-handed operation.
• Two Gears: Provides optimal speed and torque for different applications.
• Adjustable Clutch: Features 18 torque settings for precise screw driving.
• Integrated LED Worklight: Inovhenekera nzvimbo yebasa yekuvandudza kuoneka.
• Variable Speed ​​​​Trigger: Offers precise control over drilling and driving speed.
• Pamberi uye Reverse Basa: Zvekutyaira nekubvisa screws.
• Belt Clip: For convenient hands-free portability.

Figure 1: The Ozito Power X Change 18V Cordless Drill Driver (battery not included).

Figure 2: Inserting a drill bit into the 13mm keyless chuck.

Figure 3: Detail of the two-speed gear selector switch.

Gadzirira

1. Battery Installation (Battery and Charger Sold Separately):
   • Ita shuwa kuti bhatiri razara chaji usati watanga kushandisa.
   • Align the battery pack with the base of the drill handle.
   • Isa bhatiri mubhatiri kusvika ranyatsobaya panzvimbo yaro.
   • To remove, press the battery release button(s) and slide the battery pack out.
2. Installing/Removing Drill Bits or Driver Bits:
   • Rotate the chuck collar counter-clockwise until the chuck jaws are open wide enough to insert the bit.
   • Isa chibooreso bhiti kana mutyairi zvishoma zvizere muchuck.
   • Rotate the chuck collar clockwise to tighten the jaws firmly around the bit. Ensure the bit is centered and secure.
   • To remove, rotate the chuck collar counter-clockwise to loosen the jaws and pull the bit out.

Operating Instruction

1. Selecting Forward/Reverse Rotation:
   • The forward/reverse lever is located above the trigger.
   • Push the lever to the left for forward rotation (for drilling and driving screws).
   • Push the lever to the right for reverse rotation (for removing screws).
   • Center the lever to lock the trigger and prevent accidental starting.
2. Adjusting Speed (Gears):
   • The two-speed gear selector is located on top of the drill.
   • Select '1' for low speed, high torque applications (e.g., driving large screws, drilling large holes).
   • Select '2' for high speed, low torque applications (e.g., drilling small holes, fast driving).
3. Kuisa Torque (Clutch):
   • The torque adjustment collar is located behind the chuck.
   • Rotate the collar to select one of the 18 torque settings. Lower numbers are for smaller screws or softer materials, higher numbers for larger screws or harder materials.
   • For drilling, set the collar to the drill icon (maximum torque) to bypass the clutch.
4. Kushandisa Drill:
   • Hold the drill firmly with both hands if possible.
   • Position the bit on the workpiece.
   • Press the variable speed trigger to start the drill. The speed increases as you press the trigger further.
   • The integrated LED worklight will illuminate when the trigger is pressed.

Figure 4: Driving screws into a wooden surface.

Figure 5: Drilling into a metal profile.

Maintenance

Kugadziriswa nguva dzose kunovimbisa kugara kwenguva refu uye kushanda zvakanaka kwemutyairi wedhiri rako.

• Kuchenesa: Keep the ventilation slots of the tool clean to prevent overheating. Wipe the tool housing with a soft, damp jira. Usashandise makemikari ane hasha kana abrasive cleaners.
• Chuck Maintenance: Nguva nenguva geza shaya dzemachuck kuti uve nechokwadi chekuti zvidimbu zvakabatirira zvakanaka.
• Battery Care: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. Do not store batteries in a discharged state for extended periods.
• Kuchengeta: When not in use, store the drill driver in a secure, dry place out of reach of children. Remove the battery pack before storage.

Kugadzirisa matambudziko

If you encounter issues with your drill driver, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Ozito customer support.

Zvinotsanangurwa

Warranty uye Support

The Ozito Power X Change 18V Cordless Drill Driver (PXDDS-201U) comes with a 5-year warranty for domestic use. Iyi waranti inovhara kukanganisa mune zvigadzirwa uye magadzirirwo pasi pekushandiswa kwakajairwa.

For warranty claims, technical support, or spare parts, please contact Ozito customer service. Keep your proof of purchase for any warranty claims.

For the most up-to-date contact information and support resources, please visit the official Ozito websaiti kana tarisa kune iyo yekuonana data inopihwa neyako chigadzirwa kurongedza.