1. Nhanganyaya
Thank you for choosing the 509 Delta R3 Ignite Full Face Snow Helmet. This manual provides essential information for the proper use, care, and maintenance of your helmet. Please read it thoroughly before using your helmet to ensure maximum safety and performance.
The 509 Delta R3 Ignite helmet is designed for snowmobiling, offering three versatile configuration options: dual sport, full face, and open face. It features a fog-blocking heated ITO dual-pane electric shield, an orange-tinted internal flip-down sun visor, and removable breathbox and chin curtain for adaptability in various weather conditions.
Mufananidzo 1.1: Kurutivi view of the 509 Delta R3 Ignite Helmet with the main visor in the down position, showcasing dhizaini yayo yakanaka uye zvinhu zvakabatana.
2. Safety Information
WARNING: Failure to follow these instructions may result in serious injury or death.
- Always wear a helmet that fits properly and is securely fastened. A helmet that is too loose may not provide adequate protection.
- This helmet is designed for snowmobiling and meets DOT FMVSS 218 safety standards. Do not use it for activities for which it is not intended.
- Never modify your helmet. Any modifications can compromise its protective capabilities and void the warranty.
- Do not expose your helmet to petroleum products, cleaning agents, paints, adhesives, or other solvents. These substances can damage the helmet's materials, including the shell and EPS liner, without visible signs of damage.
- If the helmet sustains an impact, even if no visible damage is apparent, it should be replaced immediately. The helmet's protective capacity may be compromised.
- Ensure the electric shield cable is properly routed and secured to prevent entanglement or damage during operation.
Zvemutemo Diclaimer:
Chinhu ichi chinoenderana neUS Federal Motor Vehicle Safety Standard 218 (FMVSS 218) (DOT FMVSS Nhamba 218 Certified).
3. Helmet Components
The 509 Delta R3 Ignite helmet is comprised of several key components designed for comfort, safety, and versatility:
- Polycarbonate Shell: Lightweight and durable outer shell construction.
- Dual Density EPS Liner: Expanded Polystyrene inner material designed for maximum impact resistance.
- Heated ITO Dual Pane Electric Clear Shield: Main outer shield with anti-fog properties and heating element for clear vision.
- Internal Flip-Down Sun Shield (Orange): Retractable tinted visor for sun glare protection.
- Removable Breathbox: Helps direct exhaled breath away from the shield to prevent fogging.
- Removable Chin Curtain: Reduces wind noise and cold air entry from below the chin bar.
- Removable and Washable Internal Liner and Cheek Pads: For hygiene and comfort.
- Fidlock® Magnetic Buckle System: Secure and easy-to-use chin strap closure.
- Ventilation System: Adjustable vents for airflow control.
Mufananidzo 3.1: Kumberi view of the 509 Delta R3 Ignite Helmet, highlighting the main shield and the overall helmet shape.
4. Kugadzirisa uye Kuisa
4.1. Proper Helmet Fit
A properly fitting helmet is crucial for safety. Follow these steps to ensure a correct fit:
- Yera Musoro Wako: Use a flexible tape measure to measure the circumference of your head at its largest point, approximately 1 inch above your eyebrows.
- Sarudza Saizi: Refer to the size chart below. If your measurement falls between sizes, try the smaller size first.
- Edza Pangowani: The helmet should feel snug all around your head, with no pressure points. The cheek pads should press firmly against your cheeks.
- Tarisa Movement: With the chin strap fastened, try to rotate the helmet from side to side and front to back. Your skin should move with the helmet, indicating a secure fit. The helmet should not slide independently on your head.
- Kuongorora Chiono: Ensure your vision is not obstructed. The top edge of the eye port should be just above your eyebrows.
Helmet Size Chart
| Saizi yeBrand | Kutenderera Musoro (mukati) | Saizi yengowani (mukati) |
|---|---|---|
| XS | 20.9 - 21.1 | 6.6 - 6.8 |
| S | 21.6 - 21.9 | 6.9 - 7 |
| M | 22.5 - 22.6 | 7.1 - 7.3 |
| L | 23.3 - 23.5 | 7.4 - 7.5 |
| XL | 24 - 24.3 | 7.6 - 7.8 |
| 2XL | 24.8 - 25 | 8 |
| 3XL | 25.3 - 25.8 | 8.8 |
| 4XL | 26 - 26.3 | 9 |
| YS | 18.1 - 18.9 | 6 |
| YM | 19.3 - 19.6 | 6.1 - 6.3 |
| YL | 20 - 20.5 | 6.4 - 6.5 |
4.2. Attaching the Electric Shield Cable
The heated electric shield requires connection to a power source (typically your snowmobile's 12V accessory outlet). Ensure the cable is securely plugged into both the helmet's shield port and the vehicle's power outlet. Route the cable carefully to avoid interference with steering or other controls.
4.3. Installing/Removing Breathbox and Chin Curtain
The breathbox and chin curtain are removable for customization and cleaning. They typically attach via snaps or hook-and-loop fasteners inside the helmet. Refer to the diagrams (if available in physical manual) for precise attachment points.
5. Kushanda
5.1. Helmet Configurations
The 509 Delta R3 Ignite offers three primary configurations:
- Full Face: Standard configuration with the main shield and chin bar in place, offering maximum protection.
- Dual Sport: The main shield can be removed, allowing for the use of goggles while retaining the chin bar and visor.
- Open Face: The chin bar and main shield can be removed, converting the helmet into an open-face style (use with caution and appropriate eye protection).
Mufananidzo 5.1: Kurutivi view of the 509 Delta R3 Ignite Helmet with the main visor in the up position, demonstrating its versatility for different riding conditions.
5.2. Main Electric Shield Operation
The main shield can be raised and lowered manually. For optimal fog prevention in cold conditions, ensure the electric shield is powered on. The ITO dual-pane design, combined with the heating element, actively prevents condensation.
5.3. Internal Sun Shield Operation
To deploy the internal orange-tinted sun shield, locate the slider mechanism on the side of the helmet (typically on the left). Slide it down to lower the sun shield and up to retract it. Use this feature to reduce glare in bright conditions.
5.4. Ventilation Control
The helmet features adjustable vents (e.g., chin vent, top vents) to control airflow. Open vents for increased ventilation in warmer conditions or during strenuous activity, and close them to retain warmth in colder environments.
5.5. Fidlock® Magnetic Buckle
To fasten the chin strap, bring the two parts of the Fidlock buckle together; the magnets will guide them into place. To release, slide the red tab away from the buckle body. Ensure the strap is adjusted snugly under your chin.
6. Kuchengeta uye Kuchengeta
6.1. Cleaning the Helmet Shell
Clean the helmet shell with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or petroleum-based products, as these can damage the shell material and protective coatings.
6.2. Cleaning the Shields
The main electric shield and internal sun shield should be cleaned with a soft, damp cloth and mild soap. Do not use abrasive materials or chemical cleaners, which can scratch or damage the anti-fog and anti-scratch coatings. For the electric shield, ensure the power is disconnected before cleaning.
6.3. Cleaning the Interior Liner
The internal liner and cheek pads are removable and washable. Gently remove them from the helmet. Hand wash them with mild soap and cool water, then air dry completely before re-installing. Do not machine wash or tumble dry.
6.4. Kuchengeta
Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Use a helmet bag to protect it from dust and scratches. Do not store the helmet near chemicals or solvents.
6.5. Inspection
Regularly inspect your helmet for any signs of damage, such as cracks in the shell, frayed straps, or compromised EPS liner. If any damage is found, replace the helmet immediately.
7. Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Electric shield not heating/fogging | Cable not connected, power issue from vehicle, damaged cable/shield. | Ensure cable is securely connected to helmet and vehicle. Check vehicle's 12V outlet. Inspect cable for damage. If issues persist, contact support. |
| Helmet feels too loose/tight | Incorrect size, worn-out padding. | Re-evaluate fit using the size chart. Consider replacing worn cheek pads/liner. |
| Ruzha rwemhepo rwakanyanya | Vents open, chin curtain not installed, improper fit. | Close vents. Ensure chin curtain is properly installed. Verify helmet fit. |
| Internal sun shield not retracting/deploying smoothly | Debris in mechanism, mechanism damage. | Inspect for debris and gently clean. Do not force. If damaged, contact support. |
8. Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Brand | 509 |
| Model Name | Delta R3 Ignite |
| Item Model Number | F01000900-110-601 |
| UPC | 843614108164 |
| Color | Storm Chaser |
| Age Range | Mukuru |
| Outer Material | Polycarbonate (PC) |
| Inner Material | Yakawedzerwa Polystyrene (EPS) |
| Item Weight | Anenge 2 Pounds |
| Zviyero zveChigadzirwa (L x W x H) | 8 x 8 x 8 inches (anenge) |
| Safety Rating | DOT Certified (Meets FMVSS 218) |
| Special Features | Lightweight, Visor, Heated Dual Pane Electric Shield, Internal Sun Shield, Removable Breathbox & Chin Curtain, Fidlock Buckle |
9. Warranty uye Tsigiro
9.1. Ruzivo rweWaranti
509 products are typically covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, including duration and coverage details, please refer to the warranty card included with your product or visit the official 509 website.
Note: Damage resulting from misuse, neglect, unauthorized modifications, or impacts is generally not covered under warranty.
9.2. Mutengi Tsigiro
If you have any questions, require assistance with your helmet, or need to report a defect, please contact 509 customer support:
- Websaiti: Visit the official 509 websaiti yezviwanikwa zvekutsigira, FAQs, uye ruzivo rwekufonera.
- Fomu reKutaurirana/Email: Look for a contact form or email address on their support page.
- Runhare: Tarisa uone 509 website for a customer service phone number.
When contacting support, please have your helmet model name (Delta R3 Ignite) and item model number (F01000900-110-601) ready.
