1. Nhanganyaya
This manual provides essential information for the safe and efficient operation of your Behringer NX1000 Ultra-Lightweight 1000W Class-D Power Amplifier. Please read this manual thoroughly before using the product to ensure proper setup, usage, and maintenance.
Mberi view of the Behringer NX1000 amplifier, showcasing its compact design and front panel controls.
2. Chii chiri muBhokisi
Iva nechokwadi chekuti zvikamu zvese zviripo pakuburitsa:
- Behringer NX1000 Ultra-Lightweight 1000-Watt Class-D Power Amplifier
- Power Cable
- Chinyorwa Chirairo (gwaro iri)
3. Key Features
- Delivers 2 x 500 watts into 2 ohms; 2 x 300 watts into 4 ohms; 1000 watts into 4 ohms (Bridge mode) and weighs less than 7.3 lbs/ 3.3 kg.
- Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup.
- Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption.
- Built-in stereo crossover with low-cut, high-cut and full range Mode.
- SmartSense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance.
An efficiency graph illustrating the superior performance of Class-D technology compared to Class-AB, showing higher efficiency across various output power levels.
A frequency response graph demonstrating the linear output achieved by SmartSense loudspeaker impedance compensation, ensuring consistent sound quality regardless of speaker load.
4. Setup
Proper setup is crucial for optimal performance and safety. Follow these guidelines for connecting your amplifier:
4.1. Rack Mounting
The NX1000 is designed for standard 19-inch rack mounting. Secure the amplifier using appropriate rack screws through the rack ears on both sides of the unit.
Side profile of the Behringer NX1000 amplifier, highlighting its rack-mountable chassis.
4.2. Audio Kubatana
Batanidza sosi yako yekuteerera (musanganiswa, preamplifier, etc.) to the amplifier's input jacks. The NX1000 supports both XLR and 1/4-inch TRS connectors for balanced input signals.
Connect your passive loudspeakers to the amplifier's output terminals. The NX1000 provides both speakON and binding post outputs for flexible speaker connectivity.
Detailed view of the rear panel, showing input and output connectors for audio signals and speakers.
4.3. Simba Connection
Connect the supplied power cable to the AC inlet on the rear panel of the amplifier wobva waenda kunzvimbo yemagetsi yakakodzera.
4.4. Setup Video Guide
A step-by-step guide on how to set up D Series amplifiers, covering speaker connections, input sources, and mode selection for various audio configurations.
5. Kushanda kwe Amplifier
5.1. Powering On / Off
Press the SIMBA vhura paneri repamberi kuti utendeutse amplifier on or off. The SIMBA LED will illuminate when the unit is active.
Close-up of the power button, indicating its location on the front panel.
5.2. Vhoriyamu Kudzora
Gadzirisa iyo CHANNEL A uye CHANNEL B gain knobs on the front panel to set the desired output volume for each channel. The LCD display will show the decibel levels for precise adjustment.
5.3. Mode Selection
On the rear panel, use the MODE switch to select between STEREO, BRIDGED, kana PARALLEL operation, depending on your speaker configuration requirements.
- STEREO: Each channel operates independently, providing separate left and right audio signals.
- BRIDGED: Combines the power of both channels into a single, high-power output, ideal for driving a single subwoofer.
- KUENDERANA: Sends the same mono signal to both channels, useful for driving multiple speakers with identical audio.
5.4. Crossover Settings
Utilize the built-in stereo crossover with low-cut, high-cut, and full-range modes to optimize the frequency response for your specific speakers or subwoofers.
5.5. LED Zviratidzo
Iyo yekumberi pani ine akati wandei ma LED zviratidzo:
- PRO (Protect): Illuminates if the amplifier enters protection mode due to overload, overheating, or short-circuit.
- LIMIT: Indicates that the output signal is approaching clipping. Reduce the input level to prevent distortion.
- CHIRATIDZO: Lights up when an audio signal is present on the respective channel.
- SIMBA: Zvinoratidza kuti amplifier inobatidzwa.
5.6. Chigadzirwa Pamusoroview Vhidhiyo
An overview video demonstrating the features and connectivity options of the D Series power amplifiers, including front panel controls, input/output configurations, and operational modes.
6. Kuchengeta
Kuti uve nechokwadi chehupenyu hurefu uye nekuita kwakakwana kwewako amplifier, follow these maintenance tips:
- Keep the unit clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Ita shuwa kuti kune ventilation yakakwana yakatenderedza amplifier to prevent overheating. Do not block the ventilation grilles.
- Regularly check all cable connections for secure fit and signs of wear.
7. Kugadzirisa matambudziko
If you encounter issues with your Behringer NX1000 amplifier, tarisa kune anotevera akajairika matambudziko uye mhinduro:
- Hapana Kubuda Munzwi:
- Check all audio input and output connections.
- Iva nechokwadi chekuti amplifier is powered on and the POWER LED is illuminated.
- Verify that input sources are active and sending a signal.
- Adjust channel gain knobs and master volume on your mixer/preamp.
- Inzwi Rakakanganiswa:
- Check if the LIMIT LED is illuminated; reduce input level if it is.
- Ita shuwa kuti speaker impedance inoenderana ne ampkugona kwe lifier.
- Inspect speaker cables for damage or incorrect wiring.
- Amplifier Enters Protect Mode (PRO LED illuminated):
- Dzima iyo amplifier and disconnect all speakers.
- Check for short circuits in speaker cables or faulty speakers.
- Ensure proper ventilation to prevent overheating. Allow the unit to cool down.
- Verify that the speaker load impedance is within the amplifier's specified range (e.g., not below 2 ohms per channel).
- Ruzha rweFani Yakanyanyisa:
- Iva nechokwadi chekuti amplifier has sufficient airflow and is not in an enclosed space.
- Clean any dust buildup from the fan and ventilation grilles.
8. Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Model Name | NX1000 |
| Simba rinobuda (2 Ohms) | 2 x 500 Watts |
| Simba rinobuda (4 Ohms) | 2 x 300 Watts |
| Power Output (4 Ohms Bridged) | 1000 Watts |
| Kurema | 7.3 lbs / 3.3 kg |
| Ampanosimudza Kirasi | Kirasi-D |
| Loudspeaker Impedance Compensation | SmartSense |
| Crossover | Built-in stereo (low-cut, high-cut, full range) |
| Magetsi | Ultra-efficient switch-mode |
| Product Dimensions | 19.02 x 9.09 x 3.7 inches |
| Kubatana Technology | Wired |
| Audio Output Mode | Stereo |
| Nhamba yeMasekete | 2 |
9. Warranty & Tsigiro
The Behringer NX1000 amplifier inouya ne Yakakwana Warranty. For detailed warranty information, product support, or service inquiries, please visit the official Behringer websaiti kana kubata tsigiro yavo yevatengi zvakananga.
Always refer to the manufacturer's official resources for the most accurate and up-to-date information regarding your product.
