Nhanganyaya
This manual provides essential information for the safe and efficient operation of your VEVOR 6KW Sauna Heater. Please read all instructions carefully before installation, operation, or maintenance. Retain this manual for future reference.
Yakakosha Mirayiridzo Yekuchengetedza
- Njodzi Yemagetsi: Kuisa kunofanira kuitwa nenyanzvi yemagetsi ine hunyanzvi zvichienderana nemitemo yese yemagetsi yemuno neyenyika. Iva nechokwadi chekuti pasi rayo rakakodzera.
- Burn Hazard: The sauna heater and stones become extremely hot during operation. Avoid direct contact. Keep children and pets away from the heater.
- Moto Hazard: Do not place flammable materials near the heater. Ensure adequate clearance from walls and benches as specified in the installation section. Do not operate without sauna stones.
- Kufefetedza Proper ventilation is crucial for safe operation. Ensure the sauna room has adequate air circulation.
- Kushandiswa kwemvura: Only pour small amounts of water onto the hot stones to create steam. Excessive water can damage the heating elements and pose a safety risk.
- Maintenance: Bvisa simba usati waita chero kugadzirisa kana kuchenesa.
Product Overview
The VEVOR 6KW Sauna Heater is designed for dry steam baths in home and commercial sauna rooms. It features a durable stainless steel construction, efficient heating coils, and an internal control system for easy temperature and time adjustments.
Figure 1: VEVOR 6KW Sauna Heater with internal controls.
Zvinokosha:
- Premium Kuvaka: Stainless steel shell for durability and corrosion resistance.
- Fast Heating: 316 stainless steel heating coils ensure rapid heat-up.
- Zvidzoreso zvemukati: Integrated knobs for adjusting temperature (up to 90°C) and operating time (up to 60 minutes).
- Wall-Mounted Design: Space-saving installation with pre-drilled brackets.
- Suitable Room Size: Designed for sauna rooms between 5-9m³ (176-318 cubic feet) with a height of approximately 190cm.
Figure 2: Illustration of the sauna heater's stainless steel structure and heating elements.
Figure 3: Close-up of the built-in temperature and timer controls.
Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Simba | 6KW |
| Sauna Type | Dry Steam |
| Kushanda Voltage | 220-240V |
| Waya Inodiwa | 3*10 (N*mm²) |
| Heating Coil Material | 316 Stainless Simbi |
| Shell Material | 430 Stainless Simbi |
| Max Tembiricha | 90°C (194°F) |
| Timer Range | Max. 60 maminitsi |
| Suitable Sauna Room Volume | 5-9m³ (176-318 cubic feet) |
| Suitable Sauna Room Height | Approx. 190cm (6.2 feet) |
| Sauna Stone Requirement | Approx. 18kg (35 lbs) - Haina kubatanidzwa |
| Product Dimensions | 16.93 x 13.78 x 24.41 inches (43 x 35 x 62 cm) |
| Item Weight | 24.2 makirogiramu (11 kg) |
| Certifications | UL(us) Certified, CE IPX4 |
Mufananidzo 4: Detailed chigadzirwa zviyero uye zvakatemwa.
Setup uye Installation
Installation of the VEVOR Sauna Heater requires careful attention to electrical and safety guidelines. It is highly recommended that a qualified electrician performs the electrical wiring.
1. Zvaunofanira Kufunga Nezvekuisa Chigadziko Chisati Chaiswa:
- Ensure your sauna room meets the recommended volume and height requirements (5-9m³, approx. 190cm height).
- Verify that your electrical supply matches the heater's requirements (220-240V).
- Prepare the necessary wiring (3*10 N*mm² wire recommended).
- Iva nechokwadi chekuve nemhepo yakakwana muimba ye sauna.
Video 1: This video demonstrates the detailed display and features of the sauna heater, including its internal components and controls.
2. Mounting the Heater:
- Measure the distance of the screw holes on the back of the sauna stove.
- Mark the corresponding positions on the sauna room wall.
- Install screws on the wall, ensuring they are approximately 35cm (13.8 inches) above the ground.
- Carefully hang the sauna stove onto the installed screws, ensuring it is securely in place.
Figure 5: Illustration of the wall-mounted installation process, showing the pre-drilled brackets.
3. Electrical Wiring (220-240V):
YAMBIRO: Electrical installation must be performed by a licensed electrician. Ensure power is disconnected at the main breaker before starting any wiring.
- Locate the wiring terminal block inside the heater's control panel.
- Connect the L1 and L2 (live) wires from your power supply to the corresponding L1 and L2 terminals on the heater.
- Connect the ground wire to the ground terminal (marked with a ground symbol).
- Ita shuwa kuti zvese zvinongedzo zvakasimba uye zvakachengeteka.
Video 2: This video provides a step-by-step guide on how to wire the sauna heater for operation, including connecting the power cord and temperature probe.
4. Loading Sauna Stones:
- Place approximately 18kg (35 lbs) of sauna stones into the stone compartment.
- Ensure the stones are not packed too densely to allow for proper air circulation and heat distribution.
- The stones should cover the heating elements but not obstruct the air vents.
- Note: Sauna stones are not included with the heater.
Figure 6: Sauna heater with stones in place, ready for use.
Operating Instruction
Once installed and wired correctly, your VEVOR Sauna Heater is ready for operation.
1. Kuseta Nguva:
- Turn the timer knob to your desired operating time, up to a maximum of 60 minutes.
- The heater will begin to heat once the timer is set.
2. Kugadzirisa Tembiricha:
- Turn the temperature knob to set the desired sauna temperature. The maximum temperature is 90°C (194°F).
- Iyo hita inotenderera ichienda nekudzima kuchengetedza tembiricha yakatarwa.
3. Creating Steam (Löyly):
- Once the stones are hot, carefully ladle small amounts of water onto them to create steam.
- Do not pour large quantities of water at once, as this can damage the heater and create excessive steam.
- Shandisa mvura yakachena chete.
Figure 7: Enjoying a sauna session with steam generated by the heater.
Maintenance
Kugadziriswa nguva dzose kunovimbisa kugara kwenguva refu uye kushanda kwakachengeteka kweheater yako yesauna.
- Kuchenesa: Nguva nenguva pukutai kunze kwehita uchishandisa chizivisoamp jira. Usashandise abrasive cleaners kana solvents.
- Stone Inspection: Inspect sauna stones regularly for signs of crumbling or deterioration. Replace any broken or worn-out stones to ensure efficient heating and prevent damage to the elements.
- Mabatirwo emagetsi: Gore rega rega, ita kuti nyanzvi yemagetsi iongorore kubatana kwemagetsi kwese kuti ione kana kwakasimba uye kuti zviratidzo zvekusakara zvakadii.
- Kufefetedza Ensure that air vents are not blocked by debris or lint.
Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Heater haina kubatika. | No power supply, tripped circuit breaker, faulty wiring, timer not set. | Check power supply and circuit breaker. Verify wiring connections. Ensure timer is set correctly. Consult a qualified electrician if issues persist. |
| Chitofu hachisviki patembiricha inodiwa. | Incorrect temperature setting, insufficient sauna stones, poor room insulation, ventilation issues, faulty heating element. | Adjust temperature setting. Ensure sufficient and properly placed sauna stones. Check sauna room insulation and ventilation. Contact customer support if heating elements are suspected to be faulty. |
| Excessive steam or water dripping. | Too much water poured onto stones, stones not hot enough. | Pour smaller amounts of water. Allow stones to heat thoroughly before adding water. |
| Mitsindo isina kujairika panguva yekushanda. | Loose components, stones shifting, normal expansion/contraction. | Ensure heater is securely mounted. Rearrange stones if they are unstable. Some minor noises from thermal expansion are normal. |
Warranty uye Support
For warranty information, technical support, or replacement parts, please contact VEVOR customer service. Refer to your purchase documentation for specific warranty terms and conditions.
Mugadziri: VEVOR
Websaiti: www.vevor.com
