TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Nhanganyaya

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Package Zviri mukati

Tarisa kuti zvinhu zvese zvakanyorwa pazasi zvinosanganisirwa mupakeji yako. Kana chero zvinhu zvisipo kana kukuvadzwa, ndapota taura nemutengesi wako.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Power Adapter
• USB Mouse
• Remote Control
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Quick Start Guide

Mufananidzo 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Safety Information

Ndapota cherechedzai matanho ekuchengetedza anotevera kudzivirira kukuvara kana kukuvara kwemudziyo:

• Ita shuwa kuti magetsi emagetsi awandatage is correct before connecting the NVR.
• Do not expose the NVR to water or moisture.
• Avoid placing the NVR in direct sunlight or near heat sources.
• Install the NVR in a well-ventilated area to prevent overheating.
• Usavhure NVR casing. Tumira masevhisi ese kuvashandi vanokwanisa.
• Shandisa zvishongedzo chete zvakatsanangurwa nemugadziri.

3. Chigadzirwa Pamusoroview

NVR Front and Rear Panels

Mufananidzo 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Front Panel Indicators and Controls:

• SIMBA: Simba chiratidzo.
• STATUS: Chiratidzo chechimiro cheSystem.
• Tx/Rx: Data transmission/reception indicator.
• Mabhatani ekudzora: For menu navigation and system control.
• USB Port: For mouse or USB storage device connection.

Rear Panel Interfaces:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• Odhiyo IN/OUT: For external audio devices.
• LAN Port: Connect to your network router/switch.
• HDMI Output: Connect to a monitor for high-resolution video output (up to 4K).
• VGA Output: Connect to a monitor for video output (up to 1080p).
• Power Input (48V): Batanidza iyo yakapihwa magetsi adapta.
• Simba Chinja: To turn the NVR on/off.

Key Features

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• Tsigira live view, storage, and playback of connected cameras.

4. Setup

4.1 Hard Drive Installation (Optional)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. Bvisa uye bvisa chivharo chepamusoro cheNVR.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Batanidza hard drive kuNVR chassis uchishandisa screws dzakapihwa.
4. Dzorera chifukidziro chepamusoro wochisunga ne screws.

4.2 Makamera Anobatanidza

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Mufananidzo 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connecting to a Display and Network

• Batanidza chekutarisa kuNVR's HDMI kana VGA yekubuda port.
• Batanidza mbeva yeUSB kune imwe yemadoko eNVR eUSB.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewkugona.

4.4 Kubatidza

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Operating Instructions

5.1 Yekutanga Setup Wizard

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 Rarama View

Mushure mekutanga kuseta, NVR icharatidza mhenyu view yemakamera akabatana. Unogona kuchinja pakati pekamera imwe chete view uye grid yemakamera akawanda view using the on-screen controls or the remote control.

5.3 Kurekodha

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Kutamba

Svika yakanyorwa footage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Network Access and Remote Viewing

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Kuchengeta

6.1 Kutarisira Hard Drive

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 Firmware Updates

Tarisa mugadziri wacho website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Kuchenesa

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

7. Kugadzirisa matambudziko

• Hapana Simba:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.
• Hapana Vhidhiyo Inobuda:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Makamera Asiri Kuratidzwa:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Hapana Kurekodhwa:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.
• Remote Access Issues:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web browser settings.

8. Zvinotsanangurwa

9. Warranty uye Tsigiro

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL website. Chengetedza risiti yako yekutenga sehumbowo hwekutenga kwezvichemo zvewaranti.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.