Geko G80426 Indirect Oil Heater (40 kW) User Manual

1. Nhanganyaya

Thank you for choosing the Geko G80426 Indirect Oil Heater. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your 40 kW indirect oil heater. Please read this manual thoroughly before operating the device and keep it for future reference.

This heater is designed for professional use in well-ventilated areas, providing clean, dry heat. It operates on a 220-240V / 50Hz power supply.

2. Yakakosha Mirayiridzo Yekuchengetedza

YAMBIRO: Kukundikana kutevedzera mirairo iyi yekuchengetedza kunogona kukonzera moto, kuvhundutswa nemagetsi, kukuvara kwakanyanya, kana kufa.

• Always operate the heater in a well-ventilated area to prevent carbon monoxide poisoning.
• Ensure the power supply matches the heater's requirements (220-240V / 50Hz).
• Do not use the heater near flammable materials, liquids, or gases. Maintain a safe distance from walls and other objects.
• Usambofa wakasiya hita isina kutarisirwa paunenge uchishanda.
• Chengetedza vana nemhuka dzinovaraidza kure nehita.
• Do not block the air intake or exhaust outlets.
• Kana tambo yemagetsi ikakuvadzwa, inofanirwa kutsiviwa nemugadziri, mumiriri wayo webasa, kana vanhu vanokwanisa zvakafanana kudzivirira njodzi.
• Disconnect the heater from the power supply before performing any maintenance or cleaning.
• Chishandiso ichi hachina kuitirwa kuti chishandiswe nevanhu (kusanganisira vana) vane masimba emuviri, pfungwa kana pfungwa dzakadzikira, kana kushaya ruzivo neruzivo, kunze kwekunge vapihwa tarisiro kana kuraira maererano nekushandiswa kwemudziyo nemunhu ane mutoro wekuchengetedza kwavo.

3. Zvikamu Pamusoroview

Familiarize yourself with the main parts of your Geko G80426 Indirect Oil Heater:

• Heater Body: The main cylindrical part where combustion occurs and heat is generated.
• Exhaust Chimney: Located on top of the heater body, for expelling combustion gases.
• Tangi remafuta: The base of the heater, containing the fuel.
• Mavhiri: For easy portability of the unit.
• Handle/Frame: Yellow tubular frame for moving the heater.
• Control Panel: Includes power switch, digital displays, and possibly a thermostat control.
• Fuel Cap: For refilling the fuel tank.

4. Setup

1. Kuburitsa: Carefully remove the heater from its packaging. Inspect for any damage that may have occurred during transit.
2. Kuiswa: Position the heater on a stable, level, non-combustible surface. Ensure adequate clearance from walls, ceilings, and any flammable materials (minimum 1 meter from all sides).
3. Kufefetedza Ensure the operating area is well-ventilated. The exhaust chimney must be properly installed and vented to the outside atmosphere, away from windows or air intakes.
4. Kupisa: Fill the fuel tank with appropriate fuel (e.g., diesel, kerosene) using a clean funnel. Do not overfill. Ensure the fuel cap is securely closed after fueling.
5. Power Connection: Connect the power cord to a grounded 220-240V / 50Hz electrical outlet. Ensure the outlet is capable of handling the heater's power requirements.

5. Operating Instructions

1. Starting the Heater:
   • Ensure all safety precautions are met.
   • Turn the main power switch on the control panel to the "ON" position.
   • The heater will initiate its startup sequence. This may involve a pre-heating phase.
   • Once started, the burner will ignite, and warm air will begin to flow.
2. Adjusting Temperature (if applicable): Use the thermostat control (if present on your model) to set the desired temperature. The heater will cycle on and off to maintain this temperature.
3. Monitoring Operation: Periodically check the heater during operation to ensure it is functioning correctly and that the exhaust is clear.
4. Shutting Down the Heater:
   • Turn the main power switch to the "OFF" position.
   • The heater will enter a cool-down cycle to protect components. Do not unplug the heater during this cycle.
   • Once the cool-down cycle is complete, the heater will shut down completely.
   • Bvisa tambo yemagetsi kubva pakubuda.

6. Kuchengeta

Regular maintenance ensures the longevity and safe operation of your heater. Always disconnect the power supply before performing any maintenance.

• Zuva Nezuva / Usati Washandiswa Kwese:
  • Tarisa huwandu hwemafuta.
  • Ongorora tambo yemagetsi kana kukanganiswa.
  • Ensure air intake and exhaust are clear of obstructions.
• Weekly/After 50 Hours of Operation:
  • Chenesa kunze kwehita ne adamp jira.
  • Check fuel filter for debris and clean or replace if necessary.
  • Inspect the burner nozzle for carbon buildup and clean if needed.
• Monthly/After 200 Hours of Operation:
  • Inspect and clean the fan blades.
  • Check electrical connections for tightness.
  • Have a qualified technician inspect the combustion chamber and heat exchanger.
• Kuchengeta: When not in use for extended periods, drain the fuel tank, clean the heater thoroughly, and store it in a dry, dust-free environment.

7. Kugadzirisa matambudziko

Usati wabata rutsigiro rwevatengi, ndapota tarisa kune anotevera akajairika nyaya uye mhinduro:

8. Zvinotsanangurwa

• Muenzaniso: G80426
• Brand: Geko
• Simba rinobuda: 40 kW
• Magetsi: 220-240V / 50Hz
• Dimensions (Package): 35 x 35 x 15 cm
• Huremu (Package): 30 kg
• Material: Zvinhu zvepamusoro-soro
• Nyika Yekwakabva: Porendi

9. Warranty uye Tsigiro

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.

For further assistance, please contact Geko customer service or an authorized service center.