E-flite Tail Set: Mini Convergence (EFL9302) Instruction Manual

Nhanganyaya

This manual provides essential instructions for the E-flite Tail Set, model EFL9302, specifically designed for the Mini Convergence aircraft. It covers important safety guidelines, installation procedures, maintenance tips, and product specifications to ensure proper use and longevity of your aircraft component.

Safety Information

YAMBIRO:

Verenga bhuku remirayiridzo rose kuti uzive zviri muchigadzirwa usati washandisa. Kutadza kushandisa chigadzirwa nemazvo kunogona kukonzera kukuvara kwechigadzirwa, pfuma yemunhu uye kukonzera kukuvara kwakakomba. Ichi chigadzirwa chemhando yepamusoro chekutamba nacho. Chinofanira kushandiswa nekungwarira uye nepfungwa dzakanaka uye chinoda hunyanzvi hwekutanga hwemakanika. Kukundikana kushandisa Chigadzirwa ichi nenzira yakachengeteka uye ine mutoro kunogona kukonzera kukuvara kana kukuvara kwechigadzirwa kana chimwe chinhu. Chigadzirwa ichi hachina kuitirwa kushandiswa nevana vasina kutarisirwa zvakananga nevakuru. Usashandise nezvinhu zvisingaenderane kana kushandura chigadzirwa ichi chero nenzira ipi zvayo kunze kwemirairo yakapihwa neHorizon Hobby, LLC. Bhuku remirayiridzo yechigadzirwa rine mirairo yekuchengetedza, kushanda uye kugadzirisa. Zvakakosha kuverenga nekutevera mirairo yese nenyevero dziri mubhuku remirayiridzo, usati wagadzira, kuseta kana kushandisa, kuitira kuti ushande nemazvo uye kudzivirira kukuvara kana kukuvara kwakakomba.

Chii chiri muBhokisi

• Tail Set: Mini Convergence

Setup uye Installation

1. Kugadzirira: Ensure your Mini Convergence aircraft is powered off and the battery is disconnected before beginning installation. Clear your workspace and gather any necessary tools (e.g., small screwdriver, adhesive if required).
2. Remove Existing Tail Components (if applicable): Carefully detach any damaged or old tail components from the aircraft fuselage. Refer to your aircraft's main manual for specific removal instructions.
3. Align New Tail Set: Position the new E-flite Tail Set pieces onto the designated areas of the Mini Convergence fuselage. Ensure proper orientation and alignment with the aircraft's structure. The pieces should fit snugly.
4. Secure the Tail Set: Depending on the aircraft design, secure the tail set using the provided fasteners or recommended adhesive. Apply adhesive sparingly and allow adequate drying time if used. Ensure all connections are firm and stable.
5. Verify Control Surface Movement: Once installed, gently check the movement of any integrated control surfaces (e.g., rudders, elevators) on the tail set. Ensure they move freely and without obstruction. Reconnect the battery and perform a control surface test with your transmitter to confirm correct operation and direction.

Always refer to the complete Mini Convergence aircraft manual for detailed assembly and setup instructions, as this tail set is a replacement part.

Mafungiro Okushanda

The E-flite Tail Set is a structural and aerodynamic component of your Mini Convergence aircraft. Its operation is integral to the overall flight performance and stability. Once correctly installed, the tail set functions passively to provide lift, stability, and control authority through its associated control surfaces (if any). Ensure all control linkages are properly connected and calibrated before flight.

Maintenance

• Kugara Kuongorora: Before each flight, visually inspect the tail set for any signs of damage, cracks, or loose connections.
• Kuchenesa: If necessary, gently clean the tail set with a soft, damp cloth. Avoid using harsh chemicals that could damage the foam material.
• Kuchengeta: Store the aircraft in a safe place, away from direct sunlight and extreme temperatures, to prevent material degradation.
• Gadzirisa: Minor damage to foam can often be repaired with foam-safe adhesive. For significant damage, replacement of the tail set is recommended.

Kugadzirisa matambudziko

• Loose Tail Set: If the tail set feels loose after installation, re-check all fasteners or adhesive points. Ensure they are securely attached.
• Incorrect Control Surface Movement: If control surfaces on the tail (e.g., elevator, rudder) do not move correctly, verify that linkages are properly connected to the servos and that the servo directions are correctly set on your transmitter.
• Kukuvadza Kunooneka: Any visible cracks or deformities should be addressed immediately. Depending on severity, repair with foam-safe glue or replace the component.

Zvinotsanangurwa

Warranty uye Support

For warranty information, technical support, or replacement parts, please contact Horizon Hobby, LLC, the manufacturer of E-flite products. Refer to their official website or the original aircraft manual for contact details and specific warranty terms applicable to your region.

Horizon Hobby, LLC: www.unovemob.com