1. Chigadzirwa Pamusoroview

The GREENCYCLE Smart Wireless Light Switch and Receiver system provides a convenient solution for controlling lights and appliances. This kit includes a wireless switch panel and a compact receiver module. It supports traditional manual control, remote control via a smartphone application, and voice control through Amazon Alexa and Google Home. The system is designed for easy installation without the need for new wiring to the switch location, offering flexibility in placement and control.

Mufananidzo 1: GREENCYCLE Smart Wireless Light Switch and Receiver. The image displays the white, rectangular wireless switch panel on the left and the smaller, white receiver module with an antenna on the right. The receiver has input/output labels and a warning sticker.

2. Package Zviri mukati

Ona kuti zvinhu zvese zviripo mupasuru yako:

• 1 x Wireless Switch Panel
• 1 x Receiver Module
• 2 x Adhesive Rubbers
• 1 x Chinyorwa cheMushandisi

3. Zvinotsanangurwa

Mufananidzo 2: Dimensions of the Wireless Switch (3.38 x 3.38 inches) and Receiver (2.95 x 1.10 x 1.12 inches).

4. Ruzivo Rwakakosha Chekuchengetedza

Ndapota verengai uye nzwisisai mirairo yese yekuchengetedza musati maisa uye mashandisa. Kukundikana kutevedzera mirairo iyi kunogona kukonzera kuvhunduka kwemagetsi, moto, kana dzimwe njodzi.

• YAMBIRO: Always turn off power at the circuit breaker before installing or servicing the receiver module.
• Kuiswa kunofanira kuitwa nemunhu ane ruzivo rwemagetsi kana maererano nemakodhi emagetsi emunharaunda.
• Usapfuure mwero wepamusoro wemutoro we10A / 1000W.
• Ensure proper wiring connections (Live In, Neutral In, Live Out, Neutral Out) as indicated on the receiver.
• The wireless switch is IP54 water-resistant, suitable for damp environments like bathrooms, but should not be submerged in water.
• Chengetedza chigadzirwa kunze kwekusvikirwa nevana.

5. Setup uye Kuiswa

5.1 Kubata waya kwemugamuchiri

1. Dzima simba: Tsvaga circuit breaker inodzora mwenje wodzima magetsi. Tarisa kuti simba radzimwa uchishandisa voltage muedzo.
2. Batanidza mugamuchiri: The receiver module should be wired between the power supply and the light fixture. Refer to the wiring diagram below.
• Batanidza iyo Kugara mu wire from the power supply to the 'L IN' terminal on the receiver.
• Batanidza iyo Neutral In wire from the power supply to the 'N IN' terminal on the receiver.
• Batanidza iyo live out wire to the light fixture to the 'L OUT' terminal on the receiver.
• Batanidza iyo Neutral Out wire to the light fixture to the 'N OUT' terminal on the receiver.
3. Secure the receiver: The compact receiver can be placed inside a wiring box, canopy, or electrical box.
4. Dzosera simba: Once all connections are secure, turn the power back on at the circuit breaker.

Mufananidzo 3: Wiring diagram showing the receiver connected between the power source (AC 80-270V) and the lamp. Live and Neutral input wires connect to 'IN', and Live and Neutral output wires connect to 'OUT'.

5.2 Nzvimbo yeSwitch isina waya

The wireless switch requires no wiring and can be mounted anywhere using the provided adhesive rubbers or screws (not included).

1. Clean the desired surface for mounting.
2. Peel off the backing from the adhesive rubbers and firmly press the switch panel onto the surface.
3. Alternatively, use screws to secure the switch panel to a wall or junction box.

Mufananidzo 4: Examples of the wireless switch installed in different rooms, demonstrating its flexible placement without wiring.

5.3 Pairing the Wireless Switch with the Receiver

The switch and receiver are typically pre-paired. If re-pairing is needed or for multi-way control setup:

1. Ita shuwa kuti mugamuchiri akabatidzwa.
2. Press and hold the pairing button on the receiver (refer to receiver diagram for location, usually a small button or indicator). The indicator light on the receiver will start blinking.
3. While the receiver indicator is blinking, press the desired button on the wireless switch panel.
4. The receiver's indicator light will stop blinking or flash a confirmation, indicating successful pairing.
5. To set up multi-way control, repeat steps 2-3 with additional wireless switch panels.

5.4 Kubatanidza kuWi-Fi neApp Setup

To enable smart control features, connect the receiver to your home Wi-Fi network and set up the companion application.

1. Dhaunirodha App: Tsvaga the "Wireless Smart" app on the Apple App Store (for iOS) or Google Play Store (for Android) and install it on your smartphone.
2. Nyoresa/Pinda: Vhura iyo app uye uteedzere mirairo iri pa-screen kugadzira account kana kupinda.
3. Wedzera Mudziyo: In the app, select the option to add a new device. Follow the app's instructions to put the receiver into Wi-Fi pairing mode (this usually involves a specific power cycle or button press on the receiver).
4. Batanidza kuWi-Fi: Enter your 2.4GHz Wi-Fi network name and password when prompted by the app. The receiver will connect to your home network.
5. Zita remudziyo: Assign a descriptive name to your smart switch (e.g., "Living Room Light") for easy identification and voice control.

Mufananidzo 5: A smartphone displaying the "Wireless Smart" app interface, showing control over various light fixtures (Kitchen, Bedroom, Living Room).

6. Operating Instructions

6.1 Manual Kudzora

Press the wireless switch panel to toggle the connected light or appliance on and off. The switch transmits a 433MHz signal to the receiver.

6.2 Kudzora kweApp

Use the "Wireless Smart" application on your smartphone to control your lights from anywhere with an internet connection.

• Open the "Wireless Smart" app.
• Select the desired smart switch from your device list.
• Tap the on/off icon to toggle the light.
• If the connected light fixture supports dimming and the app provides the function, you can adjust brightness levels.

6.3 Voice Control (Amazon Alexa & Google Home)

Integrate your GREENCYCLE Smart Wireless Light Switch with Amazon Alexa or Google Home for convenient voice control.

1. Akaunti yeChinongedzo: In your Alexa or Google Home app, navigate to the 'Skills' or 'Works with Google' section. Tsvaga and enable the "Wireless Smart" skill/service. Link your "Wireless Smart" account.
2. Tsvaga Zvishandiso: Ask your voice assistant to "Discover devices" or manually initiate device discovery in the app.
3. Voice Commands: Once discovered, you can use commands such as:
   • "Alexa, vhura [Zita remudziyo]"
   • "Hei Google, dzima [Zita remudziyo]"
   • "Alexa, set [Device Name] to 50%" (if dimming is supported)

Mufananidzo 6: Examples of voice control in a home setting, showing an Amazon Echo and Google Home device responding to commands to control lights.

6.4 Basa reKushanda Nenguva

Utilize the app's timing functions to automate your lights and appliances.

• Scheduled Timer: Set specific times for your lights to turn on or off daily.
• Kuverenga Nguva: Set a timer for the light to turn off after a specified duration.
• Loop Timer: Configure repetitive on/off cycles.
• Sunrise/Sunset Sync: Schedule lights to turn on or off based on local sunrise and sunset times.

Mufananidzo 7: Screenshots from the app demonstrating scheduled timers for lights, including daily on/off times and synchronization with sunrise/sunset.

7. Kuchengeta

7.1 Kuchenesa

Wipe the wireless switch panel and receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface or internal components.

7.2 Wireless Switch Battery Replacement

The wireless switch is powered by a CR2032 button lithium battery, which has a long lifespan (up to 20 years, or 4-6 years with typical use). If the switch becomes unresponsive, the battery may need replacement.

1. Carefully pry open the back cover of the wireless switch panel.
2. Bvisa bhatiri rekare reCR2032.
3. Isa bhatiri idzva reCR2032 rine divi rakanaka (+) rakatarisa mudenga.
4. Snap the back cover securely into place.

8. Kugadzirisa matambudziko

8.1 Light Not Responding to Wireless Switch

• Check Receiver Power: Ensure the receiver is properly wired and receiving power.
• Tarisa Pairi: Re-pair the wireless switch with the receiver (refer to Section 5.3).
• Kutarisa Battery: Replace the CR2032 battery in the wireless switch (refer to Section 7.2).
• Distance/Obstructions: Ensure the switch is within the effective range of the receiver (up to 40m indoors) and there are no excessive obstructions.

8.2 App/Voice Control Not Working

• Wi-Fi Kubatana: Verify that your receiver is connected to your 2.4GHz Wi-Fi network. Check your router and internet connection.
• App Status: Ensure the "Wireless Smart" app shows the device as "Online".
• Kubatanidza Akaunti: Confirm that your "Wireless Smart" account is correctly linked to Amazon Alexa or Google Home.
• Zita reChishandiso: Use the exact device name configured in the app for voice commands.
• Kukanganisa Router: If you have a dual-band router, ensure the receiver is connected to the 2.4GHz band.

8.3 Light Flickers or Does Not Turn On/Off Correctly

• Kuenderana Kwemutoro: Ensure the connected light fixture's wattage does not exceed the receiver's maximum load (1000W).
• Wiring Check: Double-check all wiring connections to the receiver (Live In, Neutral In, Live Out, Neutral Out) for looseness or incorrect placement.
• Dimming Basa: If attempting to dim, ensure the light bulb itself is dimmable and the app supports dimming for this specific device.

9. Warranty uye Tsigiro

For warranty information or technical support, please contact GREENCYCLE customer service. Refer to the product packaging or the GREENCYCLE official websaiti yeruzivo rwazvino.

Mugadziri: GREENCYCLE TECH INC.