Nhanganyaya
Thank you for choosing the RYOBI P739 1 Gallon 120 PSI Portable 18V ONE+ Horizontal Air Compressor. This versatile and compact air compressor is designed for a variety of inflation tasks, from vehicle tires to recreational inflatables, and can also power small pneumatic tools. Its cordless design, powered by the RYOBI ONE+ 18V battery system, offers exceptional portability and convenience for both indoor and outdoor projects.
Mufananidzo 1: Zvose view of the RYOBI P739 Air Compressor.
Safety Information
Always read and understand the entire instruction manual before operating the air compressor. Failure to follow all instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.
- Kudzivirira Kweziso: Always wear ANSI Z87.1 compliant eye protection with side shields when operating or performing maintenance on the compressor.
- Kudzivirira Kunzwa: Pfeka dziviriro yekunzwa panguva yekuvhiyiwa kudzivirira kukuvara kwekunzwa.
- Kufefetedza Operate the compressor in a well-ventilated area. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Kuchengetedzwa Kwemagetsi: Ita shuwa kuti sosi yemagetsi inoenderana nevoltage requirements of the compressor. Avoid using extension cords if possible; if necessary, use only appropriate gauge and length.
- Kubvisa Mudzvanyiriri: Never exceed the maximum pressure rating of any tool or accessory. Always relieve air pressure from the tank before servicing or storing the compressor.
- Kubvisa Tangi: Regularly drain moisture from the air tank to prevent corrosion and ensure safe operation.
- Vana nevanoona: Chengetedza vana nevanoona kure nenzvimbo yekushandira.
Package Zviri mukati
The RYOBI P739 Air Compressor package includes:
- RYOBI P739 1 Gallon 120 PSI Portable 18V ONE+ Horizontal Air Compressor
- Bhuku reMuridzi
- Inflation Accessories (various nozzles and needles)
Cherechedza: Bhatiri nechaja zvinotengeswa zvakasiyana.
Zvinotsanangurwa
| Feature | Tsanangudzo |
|---|---|
| Brand | RYOBI |
| Model Name | ONE+ (P739) |
| Voltage | 18 Volts |
| Simba Source | Battery Powered |
| Capacity | 1 Gallon |
| Max PSI | 120 PSI |
| CFM pa90 PSI | 0.5 CFM |
| Noise Level | 78 Decibel |
| Hose Length | 15 Tsoka |
| Item Weight | 14 Pondo |
| Product Dimensions | 13.5"L x 11.5"W x 10"H |
| Special Feature | Cordless, Portable |
Figure 2: Product dimensions of the RYOBI P739 Air Compressor.
Gadzirira
- Isa Bhatiri: Ensure your RYOBI ONE+ 18V battery is fully charged. Slide the battery into the battery port on the compressor until it clicks securely into place.
- Batanidza Mhepo Hose: The compressor features both high-pressure and low-pressure inflation/deflation ports. For high-pressure tasks like tires, connect the appropriate chuck to the high-pressure outlet. For low-pressure tasks like inflatables, attach the large diameter hose to the low-pressure port.
- Power On: Press the power button on the control panel to turn on the compressor. The digital display will illuminate.
Figure 3: Inserting the 18V ONE+ battery into the compressor.
Figure 4: Labeled components including high-pressure and low-pressure ports.
Operating Instruction
General Operation
The control panel features a digital display, mode selection, and +/- buttons for adjusting pressure settings. The compressor has an automatic shut-off feature once the set pressure is reached.
High-Pressure Inflation (Tires)
- Seta Dzvinyiriro Yaunoda: Use the +/- buttons on the control panel to set the target PSI (Pounds per Square Inch) for your tire. Refer to your vehicle's owner's manual or tire sidewall for recommended pressure.
- Connect Chuck: Securely attach the high-pressure chuck to the tire valve stem. Ensure a tight seal to prevent air leakage.
- Kutanga Inflation: Press the START/STOP button to begin inflation. The compressor will automatically stop once the preset PSI is reached.
- Dimbura: Once inflation is complete, disconnect the chuck from the valve stem.
Figure 5: Inflating a car tire using the high-pressure hose.
Low-Pressure Inflation/Deflation (Inflatables)
- Attach Large Hose: Connect the large diameter hose to the low-pressure inflation/deflation port. Select the appropriate nozzle for your inflatable item.
- Inflate/Deflate: For inflation, connect the hose to the item and press the START/STOP button. For deflation, connect the hose to the item and select the deflation mode (if available, or reverse the hose connection if applicable to the specific model).
- Monitor Monitor the inflation/deflation process visually. This mode does not have an automatic shut-off based on pressure.
Video 1: Demonstration of the RYOBI 18V ONE+ 1 Gallon Air Compressor in use, showing both high and low pressure functions.
Video 2: Quick test of the Ryobi Air Compressor, demonstrating its speed and functionality.
Vhidhiyo 3: Review of the Ryobi 18V Portable Cordless Air Compressor, highlighting its features and ease of use.
Video 4: Short demonstration of connecting the hose and activating the Ryobi Air Compressor.
Maintenance
- Drain Air Tank: Regularly drain moisture from the air tank using the 1/4 turn tank drain valve located at the bottom of the tank. This prevents rust and extends the life of the compressor.
- Yakachena Mhepo Sefa: Periodically inspect and clean the air filter to ensure optimal performance. Refer to the manual for specific cleaning instructions.
- Chengeta Nemazvo: Store the compressor in a clean, dry area away from extreme temperatures. Disconnect the battery when not in use for extended periods.
Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Compressor haibatike | Battery not installed correctly or discharged | Iva nechokwadi chekuti bhatiri rachajwa zvizere uye rakaiswa zvakanaka. |
| Compressor inomhanya asi haivaki kumanikidzwa | Air leak in hose or connections; tank drain valve open | Check all connections for tightness. Ensure tank drain valve is closed. |
| Ruzha rwakanyanya kana kudedera | Loose components; worn parts | Inspect for loose screws or parts. If problem persists, contact customer support. |
| Mhepo inodonha kubva muvharuvhu yekuchengetedza | Pressure exceeds maximum; faulty safety valve | Ensure set pressure is within limits. If valve continues to leak, replace it. |
Warranty uye Support
For warranty information, technical support, or to order replacement parts, please refer to the warranty card included with your product or visit the official RYOBI website. Chengetedza risiti yako yekutenga sehumbowo hwekutenga kune chero vimbiso yewaranti.
