hykolity HBLL-FLC03

hykolity 4FT Linkable LED Linear Light Instruction Manual

Model: HBLL-FLC03

1. Nhanganyaya

Thank you for choosing the hykolity 4FT Linkable LED Linear Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

This LED linear light is designed for various indoor applications, including commercial offices, living rooms, restaurants, exhibition halls, garages, workshops, and storage areas. It features dimmable functionality, selectable color temperatures (3000K, 4000K, 5000K), and a linkable design for seamless connections.

2. Mirayiridzo Yekuchengetedza

YAMBIRO: To prevent electric shock, fire, or injury, always follow basic safety precautions when installing or using this product.

3. Package Zviri mukati

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact hykolity customer support.

Image showing the hykolity 4FT Linkable LED Linear Light with dimensions and included accessories.

Mufananidzo 1: Product dimensions and included accessories, including mounting brackets and cables.

4. Setup uye Kuiswa

Zvakakosha: Ensure power is OFF at the circuit breaker before starting installation.

  1. Adjust Cable Mounting Bracket: According to your installation requirements, adjust the linear fixture using the flexible cable mounting bracket. Double-check that the cable holds tightly and securely.
  2. Bvisa Kavha Yemberi: Use appropriate tools to carefully remove the front cover of the LED linear light.
  3. Batanidza Wiring: Connect the AC (Live), N (Neutral), and GND (Ground) wires. If dimming functionality is desired, connect the dimmable wires (purple/gray, minimum 24 AWG, rated min 105°C, 300V). If dimming is not needed, these wires can be capped off. After connecting, put the back cover in place.
  4. Route AC and Dimmable Wires: Break through the designated hole in the cover using a cutting nipper. Route the AC wire and dimmable wire into the LED linear fixture. If dimming is unnecessary, no connection to the dimmable wire is required.
Diagram showing four steps for installing the LED linear light, including adjusting cables, removing cover, wiring connections, and routing wires.

Mufananidzo 2: Detailed installation steps for the hykolity LED Linear Light.

Linkable Design

This fixture features a unique linkable design, allowing you to connect up to 10 lights in series seamlessly. Ensure proper electrical connections between linked units.

Image illustrating the linkable design of the LED linear light, showing how multiple units connect together and close-up steps for connecting the internal wiring.

Mufananidzo 3: Illustration of the linkable design and connection process.

5. Operating Instructions

Simba On/Kudzima

Once installed and wired correctly, the light can be turned on or off using a standard wall switch connected to the fixture's power supply.

Dimming Functionality

The hykolity LED Linear Light supports 0-10V dimming, allowing brightness adjustment from 10% to 100%. For optimal performance, use compatible 0-10V dimmers such as Lutron: IP710-40F or Legrand: RH4FBL3P.

Image showing an office environment with the LED linear lights installed, demonstrating smooth dimming from bright to dim.

Mufananidzo 4: Smooth dimming capability of the LED linear light.

Color Temperature Selection (CCT)

This fixture offers three selectable color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). The CCT can be adjusted via a switch located on the fixture, allowing customization to suit different environments and preferences.

6. Kuchengeta

Regular maintenance ensures optimal performance and longevity of your LED linear light.

7. Kugadzirisa matambudziko

If you encounter issues with your hykolity LED Linear Light, refer to the following troubleshooting guide:

DambudzikoZvinogona KukonzeraSolution
Chiedza hachibatikiHapana magetsi
Wiring isiriyo
Faulty switch
Tarisa wedunhu breaker uye madziro switch.
Verify all wire connections (AC, Neutral, Ground) are secure and correct.
Test the switch for functionality.
Chiedza chinodzima kana kudzima zvisingaiteDimmer isingaenderani
Loose wiring
Dunhu rakaremerwa
Ensure a 0-10V compatible dimmer is used (e.g., Lutron IP710-40F, Legrand RH4FBL3P).
Check dimmable wire connections.
Consult an electrician to check circuit load.
Cannot change color temperature (CCT)CCT switch not setLocate the CCT selection switch on the fixture and adjust to the desired setting (3000K, 4000K, or 5000K).
Multiple linked lights not workingConnection issue between units
Exceeded maximum linkable units
Check the physical and electrical connections between all linked fixtures.
Ensure no more than 10 units are linked in series.

8. Zvinotsanangurwa

FeatureDetail
Brandhykolity
Model NameHBLL-FLC03
Product Dimensions44"L x 2.6"W x 2.8"H
Item Weight5.5 Pounds (per unit)
Wattage40 Watts
Kupenya4800 Lumens
Kupisa Kwemavara (CCT)3000K / 4000K / 5000K Ingasarudzwa
Dimmable0-10V Inodzikiswa (10%-100%)
Voltage100-277 Volts
Chiedza Chinyorwa TypeLED
MaterialAluminium, Polyester
Finish TypePainted
Installation TypeYakamiswa
Indoor / Outdoor KushandiswaIndoor Chete
Avhareji Upenyu50,000 Maawa
Ruvara Rendering Index (CRI)90.0
CertificationsETL & CE Certified

9. Warranty uye Tsigiro

Warranty Information

This hykolity LED Linear Light comes with a 5-gore risingaperi waranti against any defects in materials and workmanship from the date of purchase.

Mutengi Support

For any questions, technical assistance, warranty claims, or support needs, please contact hykolity customer service. Refer to your purchase platform for contact details or visit the official hykolity websaiti yesarudzo dzekutsigira.

Related Documents - HBLL-FLC03

Preview Hykolity Ship Series 4FT LED Vapor Tight Light - Specifications and Installation
Detailed specifications, features, applications, and installation guide for the Hykolity Ship Series 4FT LED Vapor Tight Light. Features 3CCT selectable, power selectable, 0-10V dimmability, and IP65 rating for various environments.
Preview Hykolity WING Series 4FT LED Architectural Suspended Linear Light Specifications and Usage
Comprehensive specifications, technical data, and essential usage and safety guidelines for the Hykolity WING Series 4FT LED Architectural Suspended Linear Light (LL40W345K8-HB-BK-4R).
Preview Hykolity Libra Series LED Strip Chiedza: Zvinotsanangurwa uye Kuisa Gwaro
Tsvaga iyo Hykolity Libra Series LED Strip Chiedza. Gwaro iri rinopa zvirevo zvakakwana, zviyero, ruzivo rwehardware, uye nhanho-ne-nhanho yekumisikidza mirairo yezvose zviri zviviri kukwira pamusoro uye kumiswa kweketani. Dzidza kugadzirisa wattage uye tembiricha yemavara (CCT) neayo-inogadziriswa DIP switch.
Preview Hykolity V Shape T8 LED Shop Light 4FT - Specifications and Installation Guide
Detailed specifications, dimensions, accessories, and installation instructions for the Hykolity V Shape T8 LED Shop Light 4FT. Learn about wattage, lumen output, lifespan, and safe installation procedures.
Preview Hykolity IPN1020 Series LED Panel Chiedza neHusiku Chiedza - Zvimiro, Zvinotsanangurwa, uye Kuiswa
Ruzivo rwakadzama nezveHykolity IPN1020 Series LED Panel Chiedza, ine inosarudzika tembiricha yemavara (3000K-5000K), dimmability, 2000K husiku mwenje, uye nyore kuisa. Inosanganisira kutsanangurwa kwechigadzirwa uye gwaro rekuisa.
Preview Hykolity 4FT Kunze Yakavhenekerwa Muti weKisimusi Gungano uye Chengetedza Gwaro
Mirayiridzo yegungano yakadzama uye yakakosha kuchengetedza kweHykolity 4FT 3D Genuine Outdoor Yakavhenekerwa Muti weKisimusi, ine 600 mwenje we LED, pasi pasi, uye zip tie.