Bhuku rekushandisa reListen Technologies Wi-Fi/RF Base System Standard

Nhanganyaya

The Listen Technologies Wi-Fi/RF Base System Standard (Model LCS-120-01) is an advanced assistive listening system designed to provide compliant audio coverage by combining both RF (Radio Frequency) and Wi-Fi technologies. This system expands audio reach, allowing users to receive audio through dedicated receiving devices or personal smart devices via a free smartphone application. It is ideal for venues requiring robust and flexible audio distribution.

System Zvikamu

The LCS-120-01 system includes the following components:

Listen Technologies Wi-Fi/RF Base System components including Wi-Fi server, FM transmitter, receivers, ear speakers, and neck loops.

Mufananidzo 1: Kupfuuraview of the Listen Technologies Wi-Fi/RF Base System components.

One (1) MX5-1AE 2 Channel (mono) Wi-Fi Server: This unit (top left in Figure 1) enables audio broadcasting over Wi-Fi frequencies (2.4/5.0 GHz). It is compatible with Wi-Fi IEEE 802.11 standards and can support up to 1,000 simultaneous users. It connects to the venue's existing LAN via an RJ45 Ethernet connection.
One (1) LW-100AE Venue Awareness Kit: Used for configuring and managing the Wi-Fi system.
One (1) LT-803-072-P1 Stationary 3-Channel Transmitter Package (72 MHz): This transmitter (middle in Figure 1) broadcasts audio over the 72 MHz RF frequency. It can operate on channels A (72.100 MHz), E (72.900 MHz), or H (75.900 MHz). It features two mixing audio inputs and adjustable output power.
One (1) LPT-A107-B Dual RCA to Dual RCA Cable 6.6 ft. (2 M): For connecting audio sources to the transmitter.
Two (2) LR-200-072 Standard 3-Channel Receiver (72 MHz): These portable receivers (bottom right in Figure 1) allow users to receive audio broadcasted over the 72 MHz RF frequency.
Two (2) LA-164 Ear Speaker: These ear speakers (bottom middle in Figure 1) connect to the LR-200-072 receivers for audio output.
Two (2) LA-166 Neck Loops: These neck loops (bottom left in Figure 1) provide an inductive coupling to hearing aids equipped with a T-coil, allowing direct audio reception.

Setup Instructions

Power Connection: Connect the power adapters to the MX5-1AE Wi-Fi Server and the LT-803-072-P1 Transmitter. Ensure they are plugged into a stable power source.
Audio Source Connection: Use the LPT-A107-B Dual RCA cable to connect your audio source (e.g., mixer, sound system) to the audio inputs on the LT-803-072-P1 Transmitter. The transmitter has two mixing audio inputs.
Network Connection (Wi-Fi Server): Connect the MX5-1AE Wi-Fi Server to your venue's local area network (LAN) using an RJ45 Ethernet cable. This enables the Wi-Fi audio streaming functionality.
Transmitter Channel Selection: On the LT-803-072-P1 Transmitter, select the desired RF channel (A, E, or H) using the channel select controls. Refer to the transmitter's display for confirmation.
Receiver Preparation: For RF users, insert the LA-164 Ear Speakers or LA-166 Neck Loops into the LR-200-072 Standard Receivers. Ensure the receivers have fresh batteries.
Wi-Fi App Setup: Instruct users to download the free Listen Technologies app on their personal smart devices (phones, tablets). When launched, the app will automatically connect to the Wi-Fi server and display available audio channels.
System Testing: Before full deployment, perform a test to ensure audio is broadcasting correctly on both RF and Wi-Fi frequencies. Verify audio clarity and signal strength in various areas of the venue.

Operating Instruction

RF System Operation (72 MHz)

Transmitter Control: Adjust the input levels and mix level on the LT-803-072-P1 Transmitter to achieve optimal audio quality. The input level indicators will help prevent clipping. The output power can be adjusted to quarter, half, or full depending on the required coverage area.
Receiver Kushandisa: Users power on the LR-200-072 receivers and select the corresponding channel to the transmitter. They can then listen through the connected ear speakers or neck loops.

Wi-Fi System Operation (2.4/5.0 GHz)

App Connection: Users open the Listen Technologies app on their smartphone or tablet. The app automatically detects and connects to the MX5-1AE Wi-Fi Server.
Kusarudzwa kweChannel: The app displays a list of available audio channels. Users select their desired channel to begin listening.
Customization: The app is customizable, allowing venues to integrate their color palette, logos, user documentation, instructions, and even promotional content.

Maintenance

Kuchenesa: Regularly wipe down all system components with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
Kutsiva Bhatiri: For the LR-200-072 receivers, replace batteries as needed to ensure continuous operation. Use recommended battery types.
Firmware Dzokorora: Periodically check the Listen Technologies website for firmware updates for the Wi-Fi Server and Transmitter to ensure optimal performance and access to new features.
Cable Inspection: Inspect all cables for signs of wear or damage. Replace any damaged cables immediately to prevent signal loss or system malfunction.

Kugadzirisa matambudziko

Dambudziko	Zvinogona Kukonzera	Solution
No audio from RF receivers.	Receiver batteries are dead. Receiver not on correct channel. Transmitter not powered on or audio input issue.	Tsiva mabhatiri ekugamuchira. Tarisa kuti chiteshi chekugamuchira chinoenderana nechiteshi chekutumira. Check transmitter power and audio input connections.
No audio from Wi-Fi app.	Wi-Fi server not powered on. Wi-Fi server not connected to LAN. Device not connected to venue Wi-Fi. App not launched or channel not selected.	Ensure Wi-Fi server is powered and connected. Verify Ethernet connection to LAN. Confirm user device is connected to the correct Wi-Fi network. Launch the app and select an available channel.
Poor audio quality (static, distortion).	RF kupindira. Input levels too high/low on transmitter. Simba reWi-Fi chiratidzo.	Adjust transmitter channel or relocate transmitter. Adjust input levels on the LT-803-072-P1 Transmitter. Ensure Wi-Fi server is optimally placed for coverage.

Zvinotsanangurwa

Feature	Detail
Model Number	LCS-120-01
RF Frequency Range	72 MHz (Channels A: 72.100 MHz, E: 72.900 MHz, H: 75.900 MHz)
Wi-Fi Frequency Range	2.4 GHz / 5.0 GHz (IEEE 802.11 standards)
Wi-Fi Server Capacity	Vanoshandisa vanosvika makumi matanhatu nevana panguva imwe chete
Transmitter SNR	62 dB kana kupfuura
Transmitter Audio Freq. Response	50 Hz to 15 kHz, ± 3 dB at 72 MHz
Transmitter Audio Inputs	Two (2) mixing audio inputs
Wi-Fi Server Connectivity	RJ45 Ethernet for LAN connection
Item Weight	11.25 pounds (approximate, for entire package)
Package Dimensions	18.75 x 16 x 12.75 inches

Warranty uye Support

For information regarding product warranty, technical support, or service, please refer to the official Listen Technologies websaiti kana kubata dhipatimendi ravo rebasa revatengi. Chengetedza risiti yako yekutenga sehumbowo hwekutenga kwezvichemo zvewaranti.

Zvekushandisa Pamhepo: Visit www.nemuzsic.com for product documentation, FAQs, and support contact information.

	Teerera AmpBatanidza 621 Mushandisi Manual - Yakakwana Gwaro Ongorora bhuku rinonzi Teerera AmpBatanidza 621 bhuku rekushandisa kune yakadzama mirairo yekuyedzwa kwemaodhiyo akawanda, kuisirwa, gadziriso yehardware, calibration, uye dhijitari I/O mashandiro ane SoundCheck software.
	AmpBhuku reMushandisi reConnect 621™ - Listen, Inc. Bhuku rekushandisa reTeerera AmpConnect 621™, unit yakabatana neUSB yekuedza odhiyo ine nzira dzakawanda, ine ma inputs matanhatu, ma outputs maviri, amplifier output, impedance measurement, and digital I/O for high-resolution audio device measurement.
	Bhuku reVashandisi reSoundCheck 20: Gwaro Rakakwana reKuedza Ruzha Bhuku iri rine ruzivo rwakakwana rwekushandisa kubva kuListen, Inc. rinopa ruzivo rwakadzama pamusoro pekuisa, kugadzirisa, uye kushandisa SoundCheck 20, software inotungamira pakuedza uye kuyera electroacoustic.
	Teerera LT-800 Stationary FM Transmitter Mushandisi Manual uye Matsanangudzo Yakazara mushandisi bhuku reTeerera LT-800 Stationary FM Transmitter, inotsanangura kuseta, mashandiro, zvakatemwa, kugadzirisa matambudziko, uye zvishongedzo. Inovhara mhando LT-800-072 uye LT-800-216. Inosanganisira ruzivo rweTeerera SQ™ tekinoroji uye RF nzira dzekugamuchira.
	Teerera Sequence Note: Kutsvaga Target Level Gwaro iri rinodonongodza kutevedzana kwe 'Finding Target Level', nzira yekuona voltage yekuwana yaunoda kudzvanywa nhanho (dB SPL) uchishandisa Teerera SoundCheck software uye hardware.
	Teerera AmpGwaro Rekutanga Nekukurumidza reConnect ISC™: Kuisa uye Kuedzwa Gwaro iri rinopa mirairo yekuisa nekugadzika Teerera AmpBatanidza ISC™ audio interface neSoundCheck software. Dzidza maitiro ekutanga ekuisa, kuzviedza wega, uye maitiro ekutanga ekuongorora loudspeaker.

Listen LCS-120-01