Nhanganyaya
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Black Box UWL-12KLD Wallmount Charging Locker. This unit is designed to securely store and charge up to 12 electronic devices, featuring a keyed locking drawer for enhanced security. Please read this manual thoroughly before using the product to ensure proper function and safety.
Mufananidzo 1: Mberi view of the Black Box UWL-12KLD Wallmount Charging Locker. The locker is light gray with a black handle and a keyed lock on the main door. A perforated metal section is visible on the front for ventilation, and a lower drawer is present for additional storage or access.
Safety Information
Adhere to the following safety guidelines to prevent injury or damage to the unit:
- Ensure the locker is securely mounted to a stable wall structure capable of supporting its weight and the weight of all devices.
- Do not overload the locker beyond its specified capacity.
- Keep the locker away from water, excessive humidity, and direct heat sources.
- Only use the provided power cords and adapters, or certified replacements.
- Do not attempt to open or service the internal components. Refer all servicing to qualified personnel.
- Ita shuwa kufefetera kwakaringana kutenderedza unit kudzivirira kupisa.
Package Zviri mukati
Verify that all items are present before proceeding with installation:
- Black Box UWL-12KLD Wallmount Charging Locker Unit
- Mounting Hardware (screws, anchors)
- Keys for the main door and drawer lock (typically 2 sets)
- Power Cord
- Mushandisi Chinyorwa (gwaro iri)
Setup uye Installation
1. Sarudzo Yenzvimbo
Choose a location with a sturdy wall capable of supporting the locker's weight (approximately 35.25 lbs empty, plus devices). Ensure access to a standard power outlet and adequate ventilation space around the unit.
2. Mounting the Locker
- Carefully unpack the locker and inspect for any shipping damage.
- Using the locker as a template, mark the desired mounting points on the wall. Ensure the marks are level.
- Drill pilot holes at the marked locations. Use appropriate drill bits for your wall material (e.g., wood studs, drywall with anchors, concrete).
- Isa madziro anchors kana zvichidikanwa.
- Align the locker with the drilled holes and secure it to the wall using the provided mounting hardware. Tighten all screws firmly but do not overtighten.
- Verify the locker is securely attached and stable before proceeding.
3. Simba Connection
- Connect the provided power cord to the power inlet on the locker.
- Batanidza imwe magumo etambo yemagetsi mugetsi rinodzika pasi.
- Confirm that the power indicator light (if present) illuminates, indicating power is supplied to the unit.
Operating Instruction
1. Accessing Charging Bays
- Insert the key into the main door lock and turn to unlock.
- Open the main door to reveal the 12 individual charging bays.
2. Kuchaja Devices
- Place one electronic device into each charging bay.
- Connect the device's charging cable to the internal power outlet within the bay.
- Ensure devices are properly seated and cables are not pinched when closing the door.
3. Securing the Locker
- Close the main door firmly.
- Turn the key to the locked position and remove it.
- To secure the lower drawer, insert the key into its lock and turn to secure.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your charging locker.
- Kuchenesa: Use a soft, dry cloth to wipe down the exterior surfaces. For stubborn marks, a slightly damp cloth with mild detergent can be used, followed by drying. Do not use abrasive cleaners or solvents.
- Kufefetedza Periodically check that the ventilation openings are clear of dust and debris to ensure proper airflow and prevent overheating.
- Cable Management: Ensure internal cables are neatly arranged and not tangled or damaged. Replace any frayed or damaged cables immediately.
- Kiya Mechanism: Keep the lock mechanisms clean. If the lock becomes stiff, a small amount of graphite lubricant can be applied.
Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| No power to locker/devices not charging. | Power cord disconnected; outlet not active; internal circuit breaker tripped. | Check power cord connection to locker and outlet. Test outlet with another device. Check building's circuit breaker. |
| Door/drawer will not lock. | Obstruction in the door/drawer path; lock mechanism jammed; incorrect key. | Ensure nothing is blocking the door/drawer. Check for debris in the lock. Use the correct key. |
| Locker feels warm. | Normal operation during charging; blocked ventilation; overloaded. | Ensure ventilation openings are clear. Reduce the number of devices charging simultaneously if consistently hot. |
If the problem persists after attempting these solutions, contact Black Box customer support for assistance.
Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Model Number | UWL-12KLD |
| Brand | Black Bhokisi |
| Mudziyo Unokwanisa | 12 zvishandiso |
| Kukiya Mechanism | Keyed Locking Drawer |
| Mounting Type | Wallmount |
| Item Weight | Anenge 35.25 pounds (15.99 kg) |
| Package Dimensions | Inenge 1 x 1 x 1 inches (2.54 x 2.54 x 2.54 cm) - Note: These package dimensions appear to be placeholder values and may not reflect actual product size. |
| Mugadziri | Nhema Bhokisi Corporation |
| UPC | 822088125303 |
Warranty uye Support
For warranty information, technical support, or to purchase replacement parts, please contact Black Box Corporation directly. Refer to the official Black Box website or the product packaging for the most current contact details and warranty terms.
Nhema Bhokisi Corporation
www.blackbox.com
