JBL StagBhuku reMirayiridzo yeE810 8-inch Car Audio Subwoofer

1. Chigadzirwa Pamusoroview

Iye JBL Stage810 is an 8-inch car audio subwoofer designed to deliver high-output and low-distortion bass. It features a lightweight yet stiff polypropylene woofer cone with a hi-roll rubber surround, ensuring high efficiency and durability. This subwoofer is engineered to integrate effectively with various car audio amplifiers, providing a signature JBL sound experience.

Mufananidzo 1.1: Mberi view yeJBL Stage810 subwoofer, showcasing the cone and JBL branding.

Zvinokosha:

• High-output and low-distortion bass performance.
• Power handling capability of up to 800 watts peak power or 200W RMS.
• Frequency response range of 38 - 200Hz.
• Mounting depth: 6-15/16 inches (175mm).
• Lightweight yet stiff polypropylene woofer cone.
• Hi-roll rubber surround for durability.

2. Chii chiri muBhokisi

Please verify that all components are present upon unpacking:

• 1 x JBL Stage810 Subwoofer
• 1 x Foam Gasket
• Bhuku reMuridzi (gwaro iri)
• 2 x Two-color Brand Stickers

3. Setup uye Kuiswa

Kuisa kwakaringana kwakakosha pakuita kwakaringana uye kuchengetedzeka. Zvinokurudzirwa kuti kuiswa kuitwe nemunhu ane hunyanzvi.

3.1 Mafungiro ekukwira

Before mounting, ensure the chosen location in your vehicle provides adequate space and structural integrity to support the subwoofer. Consider the mounting depth of 6-15/16 inches (175mm) to avoid interference with vehicle components.

Mufananidzo 3.1: Kurutivi view yeJBL Stage810 subwoofer, illustrating its mounting depth.

3.2 Wiring and AmpLifier Connection

1. Power Connection: Batanidza iyo amplifier's power input directly to the vehicle's battery using an appropriate gauge power wire and fuse.
2. Ground Connection: Batanidza zvakachengeteka iyo amplifier's ground terminal to a clean, unpainted metal surface on the vehicle chassis.
3. Remote Turn-On: Batanidza iyo amplifier's remote turn-on terminal to the remote output of your head unit.
4. Signal Inzwa Zvinotaurwa: Connect the RCA outputs from your head unit to the RCA inputs on your amplifier.
5. Subwoofer Connection: Unganidza iyo subwoofer kune iyo amplifier's speaker output terminals. Ensure correct polarity (+ to + and - to -) to prevent phase issues. The JBL Stage810 has an impedance of 4 Ohms.

Tarisa kune yako amplifier's instruction manual for specific wiring diagrams and recommendations.

Mufananidzo 3.2: Kumashure view yeJBL Stage810 subwoofer, displaying model information and basic specifications.

4. Kushandisa Subwoofer

Once installed, the subwoofer operates in conjunction with your car audio system and amplifier. Adjustments for bass output and crossover frequencies are typically made on the amplifier kana musoro unit.

4.1 Initial Sound Adjustment

1. Tanga ne amplifier's gain control at its minimum setting.
2. Ridza mumhanzi waunoziva une bass yakasimba.
3. Zvishoma nezvishoma wedzera iyo amplifier's gain until the desired bass level is achieved without distortion.
4. Adjust the low-pass filter (LPF) on your amplifier or head unit to blend the subwoofer's output seamlessly with your main speakers. A common starting point is around 80-100 Hz.
5. Adjust phase settings if available, to ensure the subwoofer's output is in phase with the main speakers.

5. Kuchengeta

Iye JBL Stage810 subwoofer requires minimal maintenance to ensure long-term performance.

• Kuchenesa: Use a soft, dry cloth to wipe the subwoofer cone and surround. Avoid using harsh chemicals or abrasive cleaners.
• Kuongorora: Periodically check the wiring connections for tightness and ensure there are no signs of corrosion or damage. Inspect the subwoofer surround for any tears or cracks.
• Environment: Ensure the subwoofer is not exposed to excessive moisture or extreme temperatures, which can degrade performance and lifespan.

6. Kugadzirisa matambudziko

Kana ukasangana nematambudziko neJBL S yakotage810 subwoofer, refer to the following common troubleshooting steps:

If problems persist after following these steps, consult a professional car audio technician.

7. Zvinotsanangurwa

8. Warranty uye Tsigiro

JBL products are designed for reliability and performance. This product comes with a limited warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official JBL website.

For technical support, service, or further inquiries, please visit the official JBL support page:

Rutsigiro rwepamutemo rweJBL