Cudy LT300 4G LTE Wi-Fi Router User Manual

1. Nhanganyaya

The Cudy LT300 is a 4G LTE Wi-Fi Router designed to provide high-speed internet access using a cellular SIM card. It supports LTE download speeds of up to 150 Mbps and Wi-Fi speeds of up to 300 Mbps. This manual provides instructions for setting up, configuring, and maintaining your LT300 router.

2. Package Zviri mukati

Ndapota nyatsoongorora zviri mupakeji. Kana paine chinhu chisipo kana chakakuvara, taura nemutengesi wako.

• Cudy LT300 4G LTE Wi-Fi Router
• Power Adapter
• Ethernet Cable
• Detachable LTE Antennas (x2)
• SIM Card Adapters (Nano to Micro, Nano to Standard)
• Quick Installation Guide

3. Chigadzirwa Pamusoroview

3.1. Hardware Zvikamu

Familiarize yourself with the ports, buttons, and LED indicators on your Cudy LT300 router.

Mufananidzo 1: Mberi view of the Cudy LT300 router, showing the power, Wi-Fi, LTE signal, and LAN/WAN LED indicators.

• Simba re LED: Inoratidza simba chinzvimbo.
• Wi-Fi LED: Inoratidza mamiriro eWi-Fi.
• LTE Signal LEDs: Indicate 4G LTE signal strength.
• LAN/WAN LEDs: Indicate Ethernet port activity.

Mufananidzo 2: Rear view of the Cudy LT300 router, displaying the power port, LAN/WAN ports, SIM card slot, and WPS/Reset button.

• Simba Port: Batanidza iyo inosanganisirwa magetsi adapta.
• LAN/WAN Ports: Gigabit Ethernet ports for wired connections. One port can function as WAN for wired internet.
• SIM Card Slot: Insert your 4G LTE SIM card here.
• WPS/Reset Bhatani: Press for WPS function. Press and hold for 5-8 seconds to factory reset.
• Antenna Connectors: Connect the detachable LTE antennas.

4. Setup

4.1. Install LTE Antennas

Screw the two detachable LTE antennas into the connectors on the rear panel of the router. Ensure they are securely tightened and oriented vertically for optimal signal reception.

4.2. Isa SIM Card

The Cudy LT300 uses a standard-sized SIM card. If your SIM card is Nano or Micro, use the provided SIM card adapters to fit it into the standard slot.

1. Ita shuwa kuti router yakadzimwa.
2. Tsvaga iyo SIM kadhi slot pane yekumashure mapaneru.
3. Insert the SIM card into the slot with the metal contacts facing down and the notched corner oriented correctly, as indicated on the router. Push until it clicks into place.
4. If removing, gently push the SIM card in again until it springs out.

Mufananidzo 3: Illustration of inserting a SIM card into the Cudy LT300 router's SIM card slot.

4.3. Simba On

Connect the power adapter to the router's power port and then plug the other end into a power outlet. The Power LED will illuminate, and the router will begin to boot up. This process may take approximately 30-60 seconds.

5. Kugadzirisa

5.1. Kuwana Web Mutauro we Management

To configure your router, you need to access its web-based management interface.

1. Connect your computer to the router via Wi-Fi (SSID and password are on the label at the bottom of the router) or an Ethernet cable.
2. Vhura a web browser (semuenzaniso, Chrome, Firefox, Edge).
3. Nyora iyo default IP kero 192.168.10.1 mubara rekero uye pinda Enter.
4. Enter the default login credentials. The default username is admin uye iyo default password ndeye admin (or as printed on the router label).
5. Follow the on-screen instructions for the initial setup wizard, if prompted. It is recommended to change the default login password for security.

5.2. Basic Wi-Fi Settings

Enda kuchikamu che "Wireless" kana "Wi-Fi Settings" chiri mu web interface to customize your wireless network.

• SSID (Network Name): Change the default Wi-Fi network name to a unique name.
• Password (Security Key): Set a strong, secure password for your Wi-Fi network. WPA2-PSK AES is recommended.
• Chengetedzo Modhi: Select WPA2-PSK.

5.3. LTE/Internet Settings

The router should automatically detect your SIM card and configure the LTE connection. If not, you may need to manually configure the APN (Access Point Name) settings provided by your mobile operator.

1. Go to the "Network" or "LTE Settings" section.
2. Check the connection status. If "Disconnected" or "Limited," verify APN settings.
3. Select "Manual" APN configuration if automatic fails and enter the correct APN, username, and password from your mobile operator.
4. Save changes and reboot the router if prompted.

5.4. VoLTE Configuration

The Cudy LT300 supports VoLTE functionality. If your SIM card and mobile operator support VoLTE, you may find settings under "Voice" or "VoLTE" in the web interface to enable or configure this feature. Consult your mobile operator for specific VoLTE settings if required.

6. Kushanda

6.1. Kubatanidza Zvishandiso

• Wi-Fi: On your device (smartphone, tablet, laptop), search for the Wi-Fi network name (SSID) you configured and enter the Wi-Fi password.
• Ethernet Connect an Ethernet cable from a LAN port on the router to the Ethernet port on your computer or other wired device.

6.2. LED Zviratidzo

Monitor the LED indicators on the front panel to understand the router's status:

• Simba re LED: Solid Green (On), Off (Off).
• Wi-Fi LED: Solid Green (Wi-Fi On), Blinking (Data Transfer), Off (Wi-Fi Off).
• LTE Signal LEDs: Indicate signal strength (e.g., 3 bars for strong, 1 bar for weak).
• LAN/WAN LEDs: Solid Green (Connected), Blinking (Data Transfer), Off (No Connection).

7. Kuchengeta

7.1. Firmware Update

Regularly check for and install firmware updates to ensure optimal performance and security. Firmware files can usually be downloaded from the Cudy official website.

1. Dhawunirodha yazvino firmware file for your LT300 model.
2. Access the web manejimendi interface.
3. Navigate to "System Tools" or "Firmware Upgrade."
4. Isa iyo firmware yakatorwa file and follow the on-screen instructions. Do not power off the router during the upgrade process.

7.2. Factory Reset

A factory reset will restore the router to its default settings. This can be useful for troubleshooting or if you forget your login password.

• With the router powered on, press and hold the WPS/Reset button on the rear panel for 5-8 seconds until the LEDs flash.
• Bvisa bhatani. Router ichatangazve nemagadzirirwo efactory default.

8. Kugadzirisa matambudziko

• Hapana Indaneti:
  • Tarisa kana SIM kadhi rakaiswa nemazvo uye rakaitwa.
  • Verify LTE signal strength via the LED indicators.
  • Ita shuwa kuti APN marongero akarurama mu web interface.
  • Reboot the router and your connected devices.
• Hatikwanisi Kupinda Web Management Interface:
  • Ita shuwa kuti mudziyo wako wakabatana kune router's Wi-Fi kana kuburikidza neEthernet.
  • Verify the IP address 192.168.10.1 is typed correctly.
  • Edza zvakasiyana web browser.
  • Perform a factory reset if you forgot the login password.
• Inononoka Wi-Fi Kumhanya:
  • Check LTE signal strength; a weak signal will affect overall speed.
  • Ensure the router is placed in a central location, away from obstructions and interference.
  • Deredza huwandu hwemidziyo yakabatana kana bandwidth-yakanyanya zviitiko.
  • Consider changing the Wi-Fi channel in the web interface.

9. Zvinotsanangurwa

10. Safety Information

• Do not expose the device to water or humidity.
• Usaedze kudimbura kana kugadzirisa mudziyo wega.
• Shandisa chete adapta yemagetsi yakapihwa.
• Chengetedza mudziyo kure nezvinopisa uye zuva rakananga.
• Iva nechokwadi chekufefetedza kwakaringana kutenderedza mudziyo.

11. Warranty uye Tsigiro

For warranty information and technical support, please refer to the warranty card included in the package or visit the official Cudy website. Support resources typically include FAQs, firmware downloads, and contact information.