Product Overview
The Lepro RGB LED Strip Lights are designed to provide vibrant, color-changing illumination for various indoor applications. This 16.4ft (5m) flexible strip features 150 5050 SMD LEDs, offering primary Red, Green, Blue (RGB) colors, white, and 16 multicolored options. It comes with a 44-key IR remote controller and a 24V power adapter for easy plug-and-play setup. These lights are ideal for enhancing the ambiance of living rooms, bedrooms, dining rooms, kitchens, desks, cabinets, and are particularly suitable for holiday decorations.
Image: Complete kit of Lepro RGB LED Strip Lights, showing the coiled strip, remote control, and power supply.
Key features include ultra-high brightness, a wide range of color options with DIY customization, 8 lighting modes, and adjustable brightness levels. The strip utilizes strong 3M adhesive for easy installation, complemented by extra mounting brackets/fixing clips to ensure secure placement.
Mufananidzo: Eksamples of the LED strip lights installed in different home environments, such as behind a TV, under kitchen cabinets, and along a bar counter.
Chii chiri muBhokisi
- 1x 150 SMD 5050 LEDs 16.4ft/5m non-waterproof RGB strip
- 1x 44 key IR remote controller
- 1x 2A 12V power adapter (US Plug)
- Extra mounting brackets/fixing clips
Setup Guide
Follow these steps for proper installation of your LED strip lights:
- Gadzirira Surface: Ensure the surface where you intend to install the strip lights is clean, dry, and smooth. Wipe it thoroughly to remove any dust or debris.
- Shandisa Strip: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the desired surface, applying firm and even pressure along its entire length.
- Cut to Length (Optional): If the strip is too long for your application, you can cut it at designated cutting marks (usually indicated by a copper line and a scissor icon). Do not cut at any other point, as this may damage the strip.
- Chengetedza neClips: For added security, especially on textured surfaces or in areas where the adhesive might weaken over time, use the provided fixing clips. Space them evenly along the strip and secure them with small screws or appropriate fasteners.
- Batanidza Simba: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 12V power adapter. Plug the power adapter into a standard electrical outlet.
Image: Visual instructions demonstrating the installation process, from preparing the surface to securing the strip with clips.
Image: Detail showing the strong 3M adhesive on the back of the strip and the included fixing clips for enhanced stability.
Operating Instruction
Your Lepro RGB LED Strip Lights are controlled by the included 44-key IR remote. Ensure the remote is pointed directly at the IR receiver connected to the LED strip for optimal performance.
Image: The 44-key remote control, detailing its various functions for color selection, brightness adjustment, and mode changes.
Remote Control Mabasa:
- Batidza/Kudzima: Use the red and green buttons at the top right to turn the lights on or off.
- Kugadzirisa Kupenya: The two arrow buttons (up/down) below the power buttons control the brightness (5 levels available).
- Mavara Akamira Select from 20 static colors using the color grid buttons.
- DIY Colors: Use the DIY1-DIY6 buttons to create and save your custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
- Dynamic Modes: Choose from 8 dynamic modes (e.g., Flash, Strobe, Fade, Smooth) using the buttons on the bottom right.
- Speed Kugadziridza: For dynamic modes, use the 'QUICK' and 'SLOW' buttons to adjust the transition speed (5 levels available).
Maintenance and Care
To ensure the longevity and optimal performance of your Lepro RGB LED Strip Lights, follow these maintenance guidelines:
- Kuchenesa: Gently wipe the LED strip with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
- Kuramba Mvura: Ichi chigadzirwa kwete kudzivirira mvura. Avoid exposing the LED strip, power adapter, or remote control to water or high humidity. Install only in indoor, dry environments.
- Kubata: Do not bend the LED strip sharply or apply excessive force, as this can damage the internal circuitry.
- Magetsi: Always use the original power adapter provided with the kit. Using an incompatible power supply may damage the lights or pose a safety risk.
Kugadzirisa matambudziko
If you encounter issues with your LED strip lights, refer to the following common solutions:
- Mwenje asiri Kubatidzwa:
- Check all connections to ensure they are secure between the LED strip, IR receiver, and power adapter.
- Verify that the power adapter is properly plugged into a working electrical outlet.
- Ensure the remote control has working batteries and is pointed directly at the IR receiver.
- Zano Rakakosha: If the lights are not working or not displaying colors correctly, ensure the 4-pin connector from the LED strip is inserted correctly into the IR receiver. Sometimes, the pins may be inserted backward. If this is the case, try unplugging and re-inserting the connector in the opposite orientation. After re-inserting, press the 'Blue' color button, then the 'Power' button, and then the 'Fade 7' button on the remote repeatedly until the lights function correctly.
- Remote Kwete Kupindura:
- Dzorera bhatiri muremote control.
- Ensure there are no obstructions between the remote and the IR receiver.
- Colors Not Matching Remote:
- This can often be resolved by re-calibrating the remote. Try the 'Important Tip' mentioned above (Blue button, Power button, Fade 7 repeatedly).
Zvigadzirwa Zvinotsanangurwa
| Tsanangudzo | Detail |
|---|---|
| Model Number | 410082-RGB-US |
| Color | RGB (Dzvuku, Girini, Bhuruu) |
| Brand | Lepro |
| Indoor / Outdoor Kushandiswa | Indoor |
| Special Feature | Adjustable, Color Changing |
| Chiedza Chinyorwa Type | LED |
| Simba Source | Corded Electric |
| Chiedza Rudzi | RGB |
| Material | Mhangura, Plastiki |
| Controller Type | Remote Control |
| Kubatana Technology | Infrared |
| Nhamba Yechiedza Sources | 150 |
| Voltage | 12 Volts |
| Wattage | 24 watts |
| Item Weight | 0.22 Makirogiramu (7.7 ounces) |
| Product Dimensions | 5.43 x 5.51 x 2.8 inches |
| Mvura Resistance Level | Kwete Kudzivirira Mvura |
| Mabhatiri Anodiwa | 1 A battery (for remote) |
Warranty uye Support
Lepro products are designed for quality and reliability. For specific warranty information regarding your LED Strip Lights, please refer to the documentation included with your purchase or visit the official Lepro website.
For further assistance, technical support, or to explore other Lepro products, please visit the Chitoro cheLepro paAmazon.
