Unity Automotive 11725 Front Left Complete Strut Assembly Instruction Manual

Product Overview

The Unity Automotive 11725 Front Left Complete Strut Assembly is engineered to provide a hassle-free solution for replacing your vehicle's suspension. This preassembled unit includes all necessary components, such as the top mount, bearing plate, bumper, insulators, and coil spring, eliminating the need for specialized tools during installation. It is designed to restore your vehicle's factory ride height and ensure a stable, comfortable ride.

Unity Automotive has over 50 years of experience in manufacturing high-quality aftermarket automotive parts, focusing on durability and reliability.

Key Features

Preassembled Design: Includes top mount, bearing plate, bumper, insulators, and coil spring for a complete unit.
Restores Ride Quality: Engineered to restore factory ride height and provide a stable, comfortable driving experience.
Trouble-Free Installation: Designed for superior fit and eliminates the need for specialty tools.
Hassle-Free Repair: All new components ensure a straightforward replacement process.
Vehicle Specific Fit: Ensures precise compatibility with specified vehicle models.

Installation Guide

Ruzivo Rwakakosha Chekuchengetedza: Installation of automotive suspension components should only be performed by qualified individuals with proper tools and safety equipment. Failure to follow proper procedures can result in serious injury or damage to the vehicle. Always consult a professional mechanic if you are unsure about any step.

Zvishandiso Zvinodiwa (Zvakajairika):

Vehicle Jack and Jack Stands
Wheel Chocks
Socket Wrench Yakaiswa
Torque Wrench
Mafuta Anopinda
Magirazi Ekuchengetedza uye Magirovhosi

General Installation Matanho:

Gadzirira Motokari: Park the vehicle on a level surface, engage the parking brake, and chock the rear wheels. Loosen the lug nuts on the front left wheel.
Simudza Motokari: Safely lift the front of the vehicle using a jack and secure it with jack stands. Remove the front left wheel.
Bvisa Zvikamu: Locate the existing strut assembly. Disconnect any brake lines, ABS sensor wires, or sway bar links attached to the strut.
Remove Old Strut: Unbolt the lower mounting bolts connecting the strut to the steering knuckle. Then, unbolt the upper mounting nuts from the strut tower under the hood. Carefully remove the old strut assembly from the vehicle.
Install New Strut: Position the new Unity Automotive 11725 complete strut assembly into the strut tower. Secure the upper mounting nuts, but do not fully tighten yet.
Connect Lower Mount: Align the lower mounting holes of the new strut with the steering knuckle. Insert and hand-tighten the lower mounting bolts.
Batanidzazve Zvikamu: Reattach any brake lines, ABS sensor wires, and sway bar links that were disconnected.
Torque Fasteners: Refer to your vehicle's service manual for specific torque specifications. Fully tighten all upper and lower mounting bolts/nuts to the manufacturer's recommended torque.
Isazve Wiri: Reinstall the front left wheel and hand-tighten the lug nuts.
Mota Yepasi: Safely lower the vehicle to the ground. Fully tighten the lug nuts to the manufacturer's specifications.
Kuongorora Kwekupedzisira: After installation, it is highly recommended to have a professional alignment performed to ensure proper vehicle handling and tire wear.

Image: The Unity Automotive 11725 Front Left Complete Strut Assembly, showing the integrated coil spring, strut body, and mounting points. This preassembled unit simplifies the installation process by including all necessary components.

Maintenance and Care

The Unity Automotive 11725 Complete Strut Assembly is designed for long-lasting reliability and typically requires minimal maintenance after proper installation. However, regular vehicle inspections are recommended to ensure optimal performance and safety.

Kugara Kuongorora: Periodically inspect the strut assembly for any signs of damage, leaks, or excessive wear. Check the rubber boots for cracks and ensure all mounting bolts remain tight.
Alignment: After replacing any suspension component, it is crucial to have a professional wheel alignment performed. This ensures correct steering, handling, and prevents premature tire wear.
Kuchenesa: Keep the strut assembly free from excessive dirt, salt, and debris, especially in harsh weather conditions. A simple rinse with water during vehicle washing is usually sufficient.
Dzivisa kuwandisa: Do not exceed your vehicle's Gross Vehicle Weight Rating (GVWR) as this can put undue stress on suspension components, including the strut assembly.

Troubleshooting Common Issues

If you experience any issues after installing your new strut assembly, consider the following common problems and their potential solutions. Always consult a certified mechanic for complex issues or if you are unsure.

Symptom	Zvinogona Kukonzera	Solution
Uneven Ride Height	Incorrect part installed (e.g., wrong side), or issue with other suspension components.	Verify part number and position. Inspect other suspension components (e.g., springs, control arms) on both sides of the vehicle.
Clunking or Rattling Noise	Loose mounting bolts, worn sway bar links, or other loose components.	Check all mounting bolts (upper and lower) for proper torque. Inspect sway bar links and bushings.
Poor Handling or Steering Pull	Wheel alignment needed, or other steering/suspension components are worn.	Perform a professional wheel alignment. Inspect tie rod ends, ball joints, and control arm bushings.
Excessive Bouncing or Rough Ride	Rare for new strut; could indicate an issue with the strut itself or other worn suspension components.	Contact Unity Automotive support if the issue persists after verifying proper installation. Inspect other suspension components.

Safety Information

Always prioritize safety when working on your vehicle's suspension system. Improper installation or handling can lead to serious injury or vehicle damage.

Professional Installation Inokurudzirwa: If you are not experienced with automotive repairs, it is highly recommended to have this part installed by a certified professional mechanic.
Shandisa Zvishandiso Zvakakodzera: Always use appropriate and well-maintained tools for the job, including a reliable jack, sturdy jack stands, and a torque wrench.
Zvishandiso Zvekuzvidzivirira Pamunhu: Wear safety glasses, gloves, and appropriate work attire to protect yourself from potential hazards.
Kugadzikana kweMotokari: Ensure the vehicle is securely supported on jack stands before beginning any work underneath. Never rely solely on a jack.
Torque Zvinodiwa: Always tighten fasteners to the vehicle manufacturer's specified torque settings. Overtightening or undertightening can lead to component failure.
Proposition 65 Yambiro: Ichi chigadzirwa chinogona kunge chine makemikari anozivikanwa kuHurumende yeCalifornia kukonzera gomarara, kuremara pakuzvara, kana kumwe kukuvadza pakuzvara. Geza maoko mushure mekubata.

Warranty uye Support

For information regarding the warranty of your Unity Automotive 11725 Front Left Complete Strut Assembly, please refer to the documentation included with your purchase or visit the official Unity Automotive website. For technical support or assistance with installation, please contact Unity Automotive customer service directly.

Contact Information: Ndapota tarisai kune mukuru wemugadziri website or product packaging for the most current contact details for customer support.

Mugadziri	Unity Automotive
Brand	Kubatana
Model Number	11725
Item Weight	17.2 makirogiramu
Product Dimensions	17.4 x 6.2 x 6.2 inches
Exterior Finish	Painted
Mugadziri Chikamu Nhamba	11725
Position	Front Left (Driver Side)
ASIN	B07RT6NCTN
Kutanga Kuwanikwa Zuva	Chivabvu 15, 2019

	AR Mugadziri Wese Basa Profile \| Kubatana Nhungamiro yakazara kune AR Dhizaini basa, kudonongodza mabasa, hunyanzvi hunodiwa, maturusi, mabasa ekubatana, kufambira mberi kwebasa, uye matipi ekushandisa eiyo augmented reality indasitiri.
	Dell Unity Mhuri: Kutsiva Yakakanganiswa 2U DPE Gwaro rakazara rekutsiva yakakanganiswa 2U Disk processor Enclosure (DPE) muDell Unity yekuchengetedza masisitimu, anosanganisira ekuchengetedza, nhanho-ne-nhanho yekubvisa uye yekuisa maitiro, uye nhanho dzekusimbisa.
	Dell EMC Unity MetroSync uye VMware vSphere NFS Datastores: Tsanangudzo Yakadzamaview yeKupora Panjodzi Dzidza maitiro ekugadzirisa nekubatanidza Dell EMC Unity MetroSync neVMware vSphere NFS datastores kuti uwane simba, pasina kurasikirwa nedata panguva imwe chete. Gwaro iri rinosanganisira maitiro ekugadzirisa, kukopa, uye failover.
	Dell EMC Unity All-Flash Storage System: Technical Overview A comprehensive overview yeDell EMC Kubatana Yese-Flash yekuchengetedza sisitimu, inotsanangura mavakirwo ayo, chimiro chemuviri, sarudzo dzekubatanidza, kugona kwesoftware, uye virtualization mhinduro. Inosanganisira data yehunyanzvi yeUnity 350F, 450F, 550F, uye 650F modhi.
	Dell EMC Unity 480/480F, 680/680F, 880/880F Quick Start Guide Yekukurumidza kutanga gwara rekuisa nekugadzirisa Dell EMC Unity 480/480F, 680/680F, 880/880F yekuchengetedza masisitimu. Inovhara kuburitsa, kuisirwa njanji, kukwirisa system, serial nhamba kurekodha, network cabling, simba kumusoro, uye kero yekutanga manejimendi kero.
	Greenwood Unity dMEV Fan User Guide: Low Energy Ventilation Yakazara mushandisi gwara reGreenwood Unity decentralized mechanical extract ventilation (dMEV) fan. Dzidza nezve mabhenefiti ayo, mashandisiro, uye kugadzirisa kwenzvimbo ine hutano yemba.

Kubatana 11725

Bhuku reMirayiridzo