1. Nhanganyaya
The HyperX ChargePlay Duo is an officially licensed Xbox charging station designed to keep your Xbox Series X|S and Xbox One Wireless Controllers powered and ready for extended gaming sessions. This station allows for simultaneous charging of two controllers, ensuring you always have a charged controller at hand. It includes high-capacity rechargeable battery packs and convenient charge-through battery doors, eliminating the need for disposable batteries.
Zvinokosha:
- Official Xbox Licensed Controller Charger
- Simultaneously charges two controllers
- Includes two 1400mAh rechargeable battery packs
- Charge-through battery doors for Xbox Series X|S and Xbox One Wireless Controllers
- LED indicators display charge status
- Stable, weighted base for secure docking
2. Package Zviri mukati
Verify that all items listed below are included in your HyperX ChargePlay Duo package:
- HyperX ChargePlay Duo Controller Charging Station
- Mapaketi maviri (2) emabhatiri anochajwazve e1400mAh
- Two (2) Xbox Series X|S Battery Doors
- Two (2) Xbox One Battery Doors
- AC Wall Adapter (country-specific)
- Quick Start Guide
Image: All components included in the HyperX ChargePlay Duo package.
3. Setup
Follow these steps to set up your HyperX ChargePlay Duo:
- Batanidza Simba: Plug the AC wall adapter into the power input port on the back of the charging station. Then, plug the adapter into a wall outlet.
- Install Battery Packs:
- Remove the existing battery cover from your Xbox Wireless Controller.
- Insert a HyperX rechargeable battery pack into the controller's battery compartment, ensuring the contacts align correctly.
- Select the appropriate charge-through battery door for your controller model (Xbox Series X|S or Xbox One).
- Attach the selected battery door over the battery pack until it clicks securely into place. The contacts on the battery door should align with the charging contacts on the battery pack.
Image: HyperX rechargeable battery packs and compatible battery doors.
- Place Controller on Station: Gently place your Xbox Wireless Controller onto one of the charging docks on the HyperX ChargePlay Duo. Ensure the controller sits firmly and the charging contacts on the battery door align with the contacts on the charging station.
4. Operating Instructions
Charging Your Controllers:
Once the controller is correctly docked, the LED indicator on the charging station for that slot will illuminate to show the charging status.
- Kufema LED: Indicates that the controller's battery is currently charging.
- Solid akatungamirira: Indicates that the controller's battery is fully charged.
Image: LED charge indicators on the HyperX ChargePlay Duo.
You can leave your controllers docked on the ChargePlay Duo even after they are fully charged. The station is designed to prevent overcharging, ensuring the longevity of your battery packs.
Image: Simultaneous charging of two Xbox controllers.
5. Kugarisana
The HyperX ChargePlay Duo is compatible with the following Xbox Wireless Controllers:
- Xbox Series X|S Wireless Controllers
- Xbox One Wireless Controllers
- Xbox One Elite Wireless Controllers (Series 1)
Image: HyperX ChargePlay Duo designed for Xbox consoles.
6. Kuchengeta
To ensure the longevity and optimal performance of your HyperX ChargePlay Duo:
- Kuchenesa: Use a soft, dry cloth to wipe down the charging station and controllers. Avoid using abrasive cleaners or solvents.
- Kuchengeta: Kana usingashandiswe kwenguva yakareba, bvisa adapta yemagetsi woichengeta munzvimbo inotonhorera, yakaoma.
- Bata Nekungwarira: Avoid dropping the charging station or controllers, as this can damage internal components.
7. Kugadzirisa matambudziko
If you encounter issues with your HyperX ChargePlay Duo, try the following solutions:
- Controller haisi kubhadharisa:
- Ensure the AC wall adapter is securely plugged into both the charging station and a working power outlet.
- Verify that the controller is properly seated on the charging dock and the charging contacts are aligned. You should see the LED indicator illuminate.
- Check that the HyperX rechargeable battery pack is correctly installed in the controller and the charge-through battery door is securely attached.
- Chiratidzo che LED hachishande:
- Confirm the charging station is receiving power.
- Ensure the controller is correctly docked and the battery pack is making proper contact.
- Upfupi bhatiri hupenyu:
- Ensure the battery packs are fully charged before use (solid LED indicator).
- Battery capacity can decrease over time with repeated charging cycles. If battery life significantly degrades, consider replacing the battery packs.
Kuti uwane rumwe rubatsiro, ndapota tarisai ku official User Manual (PDF) or contact HyperX support.
8. Zvinotsanangurwa
| Feature | Tsanangudzo |
|---|---|
| Brand | HyperX |
| Model Number | HX-CPDUX-A |
| Series | ChargePlay Duo |
| Hardware Platform | Xbox One, Xbox Series X, Xbox Series S |
| Color | Nhema |
| Item Weight | 7.1 ounces |
| Zviyero zveChigadzirwa (LxWxH) | 5.16 x 4.6 x 3.16 inches |
| Simba Source | Battery Powered (via AC adapter) |
| Voltage | 100-240 Volts |
| Battery Capacity | 2 x 1400mAh Rechargeable Battery Packs |
| Kubatana Technology | Wireless (for controllers), Wired (for charging station power) |
| Cable Length | 2 Yards |
| Special Features | Charging Indicator, Wireless Charging (via contacts) |
| Mounting Type | Tabletop Mount |
| Mugadziri | HP Inc. |
| Zuva Rokutanga Kuwanikwa | Gunyana 9, 2019 |
9. Warranty uye Tsigiro
The HyperX ChargePlay Duo comes with a 2-makore waranti, ensuring peace of mind regarding product quality and performance. Additionally, HyperX provides free technical support for any assistance you may require.
For detailed warranty information or to contact technical support, please visit the official HyperX webtsvaga webhusaiti kana kuti tarisa magwaro ari mupakeji yechigadzirwa chako.
You can also access the comprehensive Mushandisi Manual (PDF) online for more in-depth information.
