Maxell MC-EX3551 3LCD Projector User Manual

1. Nhanganyaya

This manual provides essential instructions for the safe and efficient operation of your Maxell MC-EX3551 3LCD Projector. Please read this manual thoroughly before using the projector and retain it for future reference. The Maxell MC-EX3551 is a high-performance 3LCD projector designed for clear and vibrant presentations with 3700 ANSI lumens brightness and XGA (1024 x 768) resolution.

2. Safety Information

Tevedzera matanho anotevera ekuchengetedza kudzivirira moto, kuvhundutswa nemagetsi, kana kukuvara.

• Do not block the ventilation openings. Ensure adequate space around the projector for proper airflow.
• Usatarise zvakananga muprojekita lens kana iyo lamp Chiedza chakajeka chinogona kukuvadza maziso ako.
• Usaise purojekita pangoro isina kugadzikana, pachigadziko, kana patafura. Inogona kudonha, zvichikonzera kukuvara kukuru uye kukuvara.
• Usaisa purojekita pamvura kana hunyoro kuti uderedze njodzi yemoto kana kuvhundutswa nemagetsi.
• Refer all servicing to qualified service personnel. Do not attempt to open or repair the projector yourself.
• Use only the power cord supplied with the projector or an approved replacement.

3. Package Zviri mukati

Tarisa kuti zvinhu zvese zvakanyorwa pazasi zvinosanganisirwa mupakeji yako:

• Maxell MC-EX3551 3LCD Projector
• Power Cord
• Remote Control nemabhatiri
• VGA Cable
• Mushandisi Chinyorwa (gwaro iri)
• Calibration of device, testing with picture alignment and focus (as per product information)

4. Chigadzirwa Pamusoroview

Ziva zvikamu zvakasiyana-siyana uye zvinobatanidzwa neprojekita yako.

Mufananidzo 4.1: Mberi View. This image displays the front of the Maxell MC-EX3551 projector, highlighting the main projection lens. The lens is centrally located, allowing for image output.

Mufananidzo 4.2: Pamusoro View. This image shows the top panel of the projector, featuring the control buttons for power, input selection, and menu navigation. The focus and zoom adjustment rings are also visible near the lens area.

Mufananidzo 4.3: Rutivi View. This image illustrates one side of the projector, displaying prominent ventilation grilles for heat dissipation and two audio input ports.

Mufananidzo 4.4: Kumashure View. Mufananidzo uyu unopa zvakadzama view of the rear panel, showcasing all available input and output ports including COMPUTER IN 1 (VGA), CONTROL (RS-232C), USB Type B, USB Type A, HDMI 1, HDMI 2, LAN, AUDIO IN 3 (RCA), VIDEO, and the AC power inlet.

5. Setup

5.1 Kuiswa kwePurojekita

Place the projector on a stable, level surface or mount it securely to a ceiling. Ensure the projector is positioned at an appropriate distance from the screen to achieve the desired image size. Refer to the projection distance chart (not included in this manual, typically found in a separate setup guide) for optimal placement.

5.2 Kubatanidza Zvishandiso

Connect your source devices (e.g., laptop, Blu-ray player) to the projector using the appropriate cables.

• HDMI: For digital video and audio, connect an HDMI cable from your source device to either HDMI 1 or HDMI 2 chiteshi pane purojekita.
• VGA: For analog video, connect a VGA cable from your computer to the KOMITI MU 1 port.
• LAN: For network control and monitoring, connect an Ethernet cable to the LAN port.
• Audio: Connect external audio sources to the AUDIO IN ports sezvinodiwa.
• Simba: Connect the supplied power cord to the projector's AC inlet and then to a power outlet.

6. Kushandisa Projector

6.1 Simba On/Kudzima

• Kuti ubatidze, tinya iyo KUGARA/KUTI bhatani riri pa control panel kana remote control. Chiratidzo chemagetsi chichavhenekera.
• Kuti udzime, tinya iyo KUGARA/KUTI button again. A confirmation message may appear; press the button a second time to confirm shutdown. Allow the projector to cool down before unplugging.

6.2 Sarudzo Yekupinza Kwemukati

Press the INPUT button on the control panel or remote control to cycle through available input sources (HDMI 1, HDMI 2, Computer 1, Video, etc.) until your desired source is displayed.

6.3 Kugadziriswa Kwemufananidzo

• Tarisa: Rotate the FOCUS ring on the lens until the image is sharp and clear.
• Zoom: Rotate the ZOOM ring on the lens to adjust the image size.
• Keystone Kugadziriswa: If the image appears trapezoidal, use the keystone correction function in the projector's menu to square the image.

6.4 Menyu Navigation

Press the MENU button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate through options and the PINDA bhatani rekusarudza. Dzvanya MENU zvakare kubuda.

7. Kuchengeta

Kugadziriswa nguva dzose kunoita kuti purojekita yako ishande zvakanaka uye kunoita kuti igare kwenguva refu.

• Kuchenesa Lens: Gently wipe the lens with a soft, lint-free cloth specifically designed for optical surfaces. Do not use abrasive cleaners.
• Kuchenesa/Kutsiva Sefa Yemhepo: Periodically clean the air filter to prevent dust buildup, which can affect cooling and image quality. Refer to the projector's on-screen menu for filter usage time. Replace the filter when necessary.
• Lamp Care: Iyo lamp ine hupenyu husingagumi. Kana lamp indicator lights up or a message appears, it's time to replace the lamp. Always use genuine Maxell replacement lamps.
• Kucheneswa Kwekunze: Pukuta kunze kwepurojekita nejira rakapfava, rakaoma. Kana wakaita tsvina yakaoma, shandisa d zvishomaamp jira uye nyoro sipo, wobva wapukuta yakaoma.

8. Kugadzirisa matambudziko

Kana ukasangana nematambudziko, tarisa kune anotevera akajairika matambudziko uye mhinduro:

9. Zvinotsanangurwa

10. Warranty uye Tsigiro

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Maxell website. Do not attempt to service the projector yourself, as this may void your warranty.

For further assistance, contact Maxell customer support through their official channels.