Rode VideoMic NTG Instruction Manual

Nhanganyaya

The Rode VideoMic NTG is a broadcast-grade, feature-packed shotgun microphone designed for on-camera use, but also highly versatile for various recording applications. It incorporates the revolutionary acoustic design of the NTG5 broadcast shotgun microphone, delivering exceptional transparency and natural sound reproduction. This manual provides detailed instructions for setting up, operating, and maintaining your VideoMic NTG to ensure optimal performance.

Safety Information

Do not expose the microphone to extreme temperatures or high humidity.
Avoid dropping or subjecting the microphone to severe impacts.
Chengetedza maikorofoni kure nemasimba ane magineti.
Usaedze kupatsanura kana kugadzirisa maikorofoni. Izvi zvinoita kuti garandi isashande.
Use only approved cables and accessories with the microphone.
Ensure proper ventilation when charging the internal battery.

Chii chiri muBhokisi

Upon opening your Rode VideoMic NTG package, you should find the following components:

Rode VideoMic NTG Microphone
SM7-R Camera Mount with Rycote Lyre Suspension
SC10 3.5mm TRRS to TRRS Cable
USB-C kuenda ku USB-C Cable
Foam Windshield

Product Overview

The VideoMic NTG features a robust design with intuitive controls for versatile audio capture.

Rode VideoMic NTG front view with shock mount and 3.5mm cable

Mufananidzo 1: Mberi view of the Rode VideoMic NTG, showcasing its shotgun design, Rycote Lyre shock mount, and the attached 3.5mm TRRS cable.

Rode VideoMic NTG side view inoratidza zvinodzora uye chiteshi che USB-C

Mufananidzo 2: Rutivi view of the Rode VideoMic NTG, highlighting the control buttons for gain, high-pass filter, -20dB pad, high frequency boost, and the USB-C port for charging and digital audio output.

Rode VideoMic NTG back view with model information

Mufananidzo 3: Kudzoka view of the Rode VideoMic NTG, displaying the model name, manufacturing origin, and serial number information.

Zvinokosha:

Revolutionary Acoustic Design: Delivers unmatched transparency and natural sound.
Infinitely Variable Gain Control: Allows precise output level adjustment.
Auto-sensing 3.5mm Output: Automatically detects and adapts to camera (TRS) or mobile (TRRS) devices.
Digital Switching: Provides access to high-pass filter (75Hz/150Hz), -20dB pad, high frequency boost, and safety channel.
USB-C Kubatana: Functions as a fully-featured USB microphone for computers, tablets, and smartphones.
Musoro Wekubuda: 3.5mm jack doubles as a headphone output for monitoring audio when using USB.
dB Peak Warning Light: Indicates when audio is clipping.
Rechargeable Lithium-ion Battery: Offers over 30 hours of operation.

Gadzirira

1. Kuchaja Bhatiri

The VideoMic NTG has an internal rechargeable lithium-ion battery. Before first use, fully charge the microphone.

Connect the supplied USB-C to USB-C cable to the USB-C port on the microphone.
Batanidza imwe mugumo wetambo kune USB magetsi sosi (semuenzaniso, komputa USB port, USB madziro adapta).
The power indicator LED will show charging status. It will turn solid green when fully charged.

Rode VideoMic NTG on camera in outdoor setting, highlighting long battery life

Figure 4: The VideoMic NTG mounted on a camera in an outdoor environment, illustrating its long-lasting rechargeable battery, providing over 30 hours of use.

2. Kuisa Maikorofoni

The VideoMic NTG comes with an SM7-R camera mount, which features a Rycote Lyre suspension system to minimize handling noise.

Slide the cold shoe mount of the SM7-R into your camera's hot shoe or a compatible accessory mount.
Tighten the locking wheel on the SM7-R to secure it in place.
Ensure the microphone is firmly seated in the Rycote Lyre suspension.

Person operating a camera with the Rode VideoMic NTG mounted on top

Figure 5: A user operating a camera with the Rode VideoMic NTG securely mounted on top, demonstrating a typical setup for video recording.

3. Kubatanidza kune Zvishandiso

The VideoMic NTG features an auto-sensing 3.5mm output and a USB-C output for broad compatibility.

Connecting to Cameras (3.5mm TRS)

Use the supplied SC10 3.5mm TRRS to TRRS cable.
Connect one end of the SC10 cable to the 3.5mm output on the VideoMic NTG.
Connect the other end to the microphone input on your camera. The microphone will automatically detect the camera connection.

Connecting to Mobile Devices (3.5mm TRRS)

Use the supplied SC10 3.5mm TRRS to TRRS cable.
Connect one end of the SC10 cable to the 3.5mm output on the VideoMic NTG.
Connect the other end to the headphone/microphone jack on your smartphone or tablet. The microphone will automatically detect the mobile connection.
Note: For Lightning-equipped iOS devices, an SC15 or SC19 cable (sold separately) is required. Ensure your VideoMic NTG firmware is up to date for full compatibility.

Connecting to Computers/Tablets/Smartphones (USB-C)

Use the supplied USB-C to USB-C cable.
Connect one end of the USB-C cable to the USB-C port on the VideoMic NTG.
Connect the other end to a USB-C port on your computer, tablet, or smartphone.
Maikorofoni ichaonekwa semudziyo wekuisa ruzha.

Rode VideoMic NTG connected to a laptop via USB-C on a desk

Figure 6: The Rode VideoMic NTG set up on a desk, connected to a laptop via its USB-C port, demonstrating its capability to capture professional audio with various devices.

Kushanda

1. Powering On / Off

Power On: Press and hold the power button (located on the side) for 3 seconds. The power indicator LED will illuminate.
Power Off: Press and hold the power button for 3 seconds. The power indicator LED will turn off.
Auto Power On/Off: When connected to a camera via the 3.5mm output, the VideoMic NTG will automatically power on when the camera is turned on and power off when the camera is turned off (if the camera provides plug-in power).

2. Kunzwisisa Kudzora

The VideoMic NTG features several digital switches and a variable gain control for precise audio adjustment.

Mufananidzo 7: Rutivi view of the Rode VideoMic NTG, illustrating the placement of its digital controls and gain knob for on-board signal processing.

Gain Control Knob: This infinitely variable knob allows you to precisely adjust the output level of the microphone. Rotate clockwise to increase gain, counter-clockwise to decrease. This control is active for both 3.5mm and USB outputs, though for USB, fine-tuning may also be done via software.
High-Pass Sefa (HPF): Press the HPF button to cycle through filter settings (Off, 75Hz, 150Hz). This reduces low-frequency noise like rumble or air conditioning hum.
-20dB Pad: Press the PAD button to engage a -20dB attenuation. Use this when recording very loud sound sources to prevent clipping.
High Frequency Boost: Press the HF button to engage a high-frequency boost. This can enhance clarity and intelligibility, especially when using a windshield or in situations where high frequencies are attenuated.
Safety Channel: When enabled (via the power button, short press after power on), the microphone outputs a second audio channel at -20dB. This provides a backup in case the main channel clips due to unexpected loud sounds. This feature is primarily for 3.5mm output.
dB Peak Warning Light: This LED illuminates red when the audio signal is clipping. Adjust the gain control or engage the -20dB pad if this light frequently illuminates.

3. Monitoring Audio

When using the VideoMic NTG as a USB microphone, the 3.5mm jack functions as a headphone output for direct monitoring.

Connect headphones to the 3.5mm output jack on the microphone.
You will hear the microphone's input signal directly, allowing you to monitor your audio in real-time.

Maintenance

Kuchenesa: Use a soft, dry cloth to clean the microphone body. Do not use abrasive cleaners or solvents.
Kuchengeta: Chengetedza maikorofoni munzvimbo inotonhorera, yakaoma, kure nechiedza chezuva uye tembiricha yakanyanyisa.
Battery Care: For long-term storage, ensure the battery is charged to approximately 50%. Recharge every 3-6 months to maintain battery health.
Windshield: The foam windshield can be gently cleaned with mild soap and water if it becomes dirty. Allow it to air dry completely before reattaching.

Kugadzirisa matambudziko

Dambudziko	Zvinogona Kukonzera	Solution
Hapana audio inobuda	Microphone not powered on; incorrect cable connection; low battery; incorrect input selected on device.	Ensure microphone is powered on. Check cable connections (3.5mm or USB-C). Charge the battery. Select the correct audio input on your camera/computer/mobile device.
Audio is distorted/clipping	Input signal too loud; gain set too high.	Reduce the gain using the variable gain control. Engage the -20dB pad. Move the microphone further from the sound source.
Audio is too quiet/noisy	Gain set too low; microphone too far from source; background noise.	Increase the gain using the variable gain control. Move the microphone closer to the sound source. Use the high-pass filter to reduce low-frequency rumble. Record in a quieter environment.
Microphone not recognized by computer via USB	Faulty USB cable; driver issue; incorrect USB port.	Try a different USB-C cable. Try a different USB-C port on your computer. Restart your computer. Check your operating system's sound settings to ensure the VideoMic NTG is selected as the input device.
No audio monitoring via headphone jack (USB mode)	Headphones not fully inserted; volume too low.	Ensure headphones are fully plugged into the 3.5mm jack. Adjust the monitoring volume on your computer/device.

Zvinotsanangurwa

Feature	Detail
Model Name	VMNTG
Acoustic Musimboti	Dzvinyiriro Gradient
Polar Pattern	Super Cardioid
Frequency Range	20Hz - 20kHz
Output Impedance	1 Ohm
Chiratidzo-ku-Ruzha Ratio	79 dB
Equivalent Noise Level (A-weighted)	20 dB
Kubatana	3.5mm auto-sensing TRRS, USB-C
Simba Source	Internal rechargeable Lithium Polymer battery (included), USB Bus Power
Hupenyu hwebhatiri	Kupfuura 30 maawa
Dimensions (L x W x H)	10 x 4 x 3 inches (approx. 254 x 102 x 76 mm)
Item Weight	3.32 ounces (inenge 94 gramu)
Inosanganisirwa Zvikamu	Microphone, SM7-R Camera Mount, SC10 Cable, USB-C Cable, Foam Windshield

Warranty uye Support

Rode Microphones products are designed and manufactured to the highest quality standards. For information regarding warranty terms and conditions, product registration, firmware updates, and technical support, please visit the official Rode websaiti:

Visit Rode Official Website

You can also find additional resources, FAQs, and contact information for customer service on their support pages.

	RODE NTH-100 Professional Over-Ear Headphones Mushandisi Manual Ziva iyo RODE NTH-100 inyanzvi pamusoro-nzeve mahedhifoni, akagadzirirwa kusarudzika kuita odhiyo, kunyaradza kwepamusoro, uye kusimba kune vanogadzira zvemukati. Dzidza nezve akakosha maficha, dhizaini, uye zvakatemwa.
	Rode Wireless GO II Quickstart Guide Yekukurumidza kutanga gwara reRode Wireless GO II, inovhara kuseta, kushanda, uye ruzivo rwekuchengetedza.
	RØDECaster Video: All-in-One Production Console for Video and Audio Discover the RØDECaster Video, a revolutionary all-in-one console for seamless video and audio production, live streaming, and podcasting. Featuring advanced switching, professional audio mixing, and powerful processing.
	RØDE Stereo VideoMic Pro Instruction Manual - Setup, Zvimiro, uye Zvinotsanangurwa Yakakwana gwara kune RØDE Stereo VideoMic Pro pa-kamera maikorofoni, inovhara kuseta, zvinodzora, zvimiro, zvakatemwa, kugadzirisa matambudziko, uye mirairo yekutarisira. Dzidza maitiro ekuita kutepfenyura-mhando yemavhidhiyo emavhidhiyo ako.
	Kuita kune Virtual: Vhidhiyo Kugadzira Gwaro reTheatre uye Dhanzi Dzidza maturusi akakosha, matipi, uye matekiniki ekushandura yemitambo yemitambo yemitambo uye yekutamba kuita vhidhiyo, inovhara ruzha, green screen, storyboarding, uye midziyo yakakosha kubva kuVhidhiyo Association yeDallas.
	ZGCINE ZG-R30 Wireless Microphone Charging Case User Manual Comprehensive user manual for the ZGCINE ZG-R30 charging case, designed for Rode Wireless Go microphones. Details features, technical specifications, operation guide, storage, transportation, and after-sales service.

Rode VMNTG