1. Nhanganyaya
Thank you for choosing the HBN Outdoor Wireless Remote Control Outlet. This device provides a simple and convenient way to control your electrical appliances, lights, and decorations from a distance. Designed for both indoor and outdoor use, it features a weatherproof construction and a reliable wireless signal.
2. Safety Information
Ndapota verenga uye unzwisise mirairo yese yekuchengetedza usati washandisa chigadzirwa ichi. Kutadza kutevedzera mirairo iyi kunogona kukonzera kuvhunduka kwemagetsi, moto, kana kukuvara zvakanyanya.
- For Outdoor Use: Ensure the outlet is plugged into a Ground Fault Circuit Interrupter (GFCI) protected receptacle.
- Kukwidza: When used outdoors, mount the outlet vertically with the receptacles facing downwards, at least 2 feet (0.6 meters) above ground level, to prevent water ingress.
- Load Capacity: Do not exceed the maximum electrical ratings: 125V, 15A/1875W resistive, 10A/1250W tungsten, 1/2HP.
- Kuratidzwa kwemvura: Do not immerse the product in water. Avoid direct water spray onto the outlets.
- Vana: Chengetedza pasingasvikirwi nevana.
- Kukuvadza: Do not use if the product or its cord is damaged.
- Kubvarura: Do not attempt to disassemble or repair the unit. Contact customer support for assistance.
3. Package Zviri mukati
- HBN Outdoor Wireless Remote Control Outlet Unit(s) (Quantity may vary based on pack purchased)
- Wireless Remote Control(s)
- 12V 23A Battery (for remote control)
4. Chigadzirwa Pamusoroview
The HBN remote control outlet system consists of a receiver unit (the outlet plug) and a transmitter unit (the remote control). The receiver unit features dual 3-prong outlets and a manual ON/OFF button. The remote control allows for convenient operation from up to 100 feet in line-of-sight.
5. Setup Instructions
5.1. Remote Control Battery Installation
- Vhura chivharo chebhatiri kuseri kweremote control.
- Insert one 12V 23A battery, ensuring the correct polarity (+ and - signs).
- Vhara chivharo chebhatiri.
5.2. Plugging in the Outlet Unit
- Plug the HBN Outdoor Wireless Remote Control Outlet into a standard 125V electrical receptacle.
- For outdoor use, ensure the receptacle is GFCI protected and the outlet unit is mounted vertically at least 2 feet above ground.
- The outlet is pre-programmed for immediate use.
6. Operating Instructions
6.1. Basic ON/OFF Operation
- Kushandisa Remote Control: Press the "ON" button on the remote to turn on connected devices. Press the "OFF" button to turn them off. The remote can control the outlets from up to 100 feet in line-of-sight, even through walls and doors.
- Using the Manual Button: Each outlet unit has a manual power button. Press this button to toggle the power ON or OFF for the connected devices.
6.2. Pairing Receiver to Transmitter
If you need to pair a receiver outlet to a remote control, follow these steps:
- Batanidza chinoburitsa chekugamuchira mumagetsi.
- Press and hold the ON/OFF button on the receiver outlet for 3 seconds. The LED indicator will start flashing slowly.
- Release the ON/OFF button on the receiver and press either the ON or OFF button on the transmitter (remote control) to pair the transmitter to the receiver.
Video: An official HBN video demonstrating the pairing process for the outdoor remote control outlet. It shows how to press and hold the button on the outlet unit and then use the remote to establish a connection.
6.3. Resetting an Outlet
If you wish to unpair an outlet receiver from the remote, or if your outlets are unresponsive, you can reset them:
- Bvisa chinogashira chinobuda kubva pane socket yemagetsi.
- Dzvanya uye bata bhatani re ON / OFF pane inoburitsa inogamuchira.
- While still holding the button, plug the outlet receiver back into a power socket and wait to see the indicator flash.
- Kana chiratidzo chamira kupenya, unogona kusunungura bhatani, uye maitiro ekugadzirisa zvakare apera.
- You may program the outlet again after resetting.
7. Kuchengeta
- Kuchenesa: Disconnect from power before cleaning. Wipe with a soft, damp jira. Usashandise makemikari ane hasha kana abrasive cleaners.
- Kuchengeta: Chengetedza munzvimbo inotonhorera, yakaoma kana isiri kushandiswa.
- Kutsiva Bhatiri: Replace the remote control battery when the signal weakens or the remote stops responding.
8. Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Nzvimbo yekubuditsa mashoko haisi kupindura kune remote. | Remote battery is dead or weak. | Tsiva bhatiri re12V 23A riri kure kure. |
| Outlet and remote are not paired. | Follow the "Pairing Receiver to Transmitter" instructions in Section 6.2. | |
| Distance between remote and outlet is too far or obstructed. | Reduce the distance or remove obstructions. The maximum range is 100ft line-of-sight. | |
| Outlet does not power on manually. | No power to the wall receptacle. | Check the circuit breaker or test the wall receptacle with another device. |
| Overload kana pfupi dunhu. | Unplug devices, check for damage, and ensure total wattage haipfuure 1875W. |
9. Zvinotsanangurwa
- Model Number: U151R-1-1
- Kuverengwa kweMagetsi: 125V, 15A/1875W Resistive, 10A/1250W Tungsten, 1/2HP
- Kubatana: Radio Frequency (RF)
- Wireless Range: Kusvika mamita makumi maviri (kureba)
- Zvitengesi: Dual 3-Prong Grounded Outlets
- Cord Length: 6 inches
- Zvitupa: ETL Yakanyorwa
- Dimensions: Approximately 3.11 x 2.95 x 1.57 inches (main unit)
- Ruvara: Nhema
10. Warranty uye Tsigiro
For warranty information or technical support, please contact HBN customer service. Refer to the product packaging or the official HBN websaiti kuti uwane ruzivo.
Mugadziri: HBN
