Nhanganyaya
The mophie powerstation XL/2 is a portable universal battery designed to charge smartphones, tablets, and other USB-C and USB-A compatible devices. With an 8,000mAh capacity, it provides extended power for your mobile devices. This manual provides essential instructions for the safe and efficient use of your powerstation XL/2.
Chii chiri muBhokisi
- mophie powerstation XL/2 (8,000mAh)
- Kuchaja Cable (USB-A kusvika USB-C)
- Bhuku reMuridzi (gwaro iri)
Mufananidzo 1: Mberi view of the mophie powerstation XL/2, showcasing its grey fabric finish and compact design.
Gadzirira
Initial Charging of Your powerstation XL/2
Before first use, fully charge your powerstation XL/2. Use the provided USB-A to USB-C charging cable to connect the powerstation's USB-C port to a compatible USB wall adapter (not included). The LED indicators will illuminate to show the charging status.
- Connect the small end of the USB-A to USB-C cable to the USB-C input/output port on the powerstation.
- Connect the large end of the USB-A to USB-C cable to a USB wall adapter.
- The LED indicator lights will begin to flash, indicating that the powerstation is charging.
- All four LED lights will be solid when the powerstation is fully charged.
Understanding the LED Power Indicator
The powerstation XL/2 features a four-light LED indicator system to display its charge level and charging status. Press the power button once to check the current battery level.
Mufananidzo 2: Rutivi view of the powerstation XL/2, highlighting the power button and LED indicators for battery status.
| LEDs Lit | Charge Level |
|---|---|
| 1 LED | 0-25% |
| 2 LEDs | 25-50% |
| 3 LEDs | 50-75% |
| 4 LEDs | 75-100% |
Operating Your powerstation XL/2
Kuchaja Midziyo Yako
The powerstation XL/2 is equipped with both a USB-C port and a USB-A port, allowing you to charge a variety of devices. You can charge two devices simultaneously.
Mufananidzo 3: Pamusoro view of the powerstation XL/2, illustrating the USB-C and USB-A output ports.
- Connect your device's charging cable to the appropriate port on the powerstation (USB-C or USB-A).
- Unganidza mumwe mugumo wekambo kune yako kifaa.
- The powerstation will automatically begin charging your device. If it does not, press the power button once.
- The LED indicators on the powerstation will show its remaining battery level while charging your device.
Cherechedza: The USB-C port on the powerstation XL/2 functions as both an input for charging the powerstation itself and an output for charging your devices.
Maintenance
Kuchenesa
To clean your powerstation XL/2, gently wipe the exterior with a soft, lint-free cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the device.
Storage
Store the powerstation in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is recommended to charge the powerstation to approximately 50% every three months to maintain battery health.
Battery Care
- Do not expose the powerstation to water or other liquids.
- Avoid dropping or subjecting the powerstation to strong impacts.
- Do not attempt to disassemble, open, or service the powerstation yourself. This will void the warranty and may result in injury.
- Dispose of the powerstation responsibly according to local regulations for lithium-polymer batteries.
Kugadzirisa matambudziko
Powerstation Not Charging
- Ensure the charging cable is securely connected to both the powerstation's USB-C port and the wall adapter.
- Verify that the wall adapter is functioning correctly and plugged into a live power outlet.
- Try using a different USB-C charging cable or wall adapter.
Device Not Charging from Powerstation
- Check if the powerstation has sufficient charge (press the power button to check LEDs).
- Ensure your device's charging cable is securely connected to both the powerstation and your device.
- Try pressing the power button on the powerstation to initiate charging.
- Test with a different charging cable for your device.
- Ensure your device is compatible with USB-C or USB-A charging.
LED Indicators Haisi Kushanda
- If the LEDs do not light up when the power button is pressed, the powerstation may be completely depleted. Connect it to a power source for charging.
- If issues persist, contact mophie customer support.
Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Model Name | powerstation XL/2 |
| Battery Capacity | 8,000mAh (Lithium Polymer) |
| Input Port | 1x USB-C |
| Output Ports | 1x USB-C, 1x USB-A |
| Dimensions | 7.87 x 4.21 x 1.18 inches |
| Kurema | 9.6 ounces |
| Special Features | LED Indicator Lights, Lightweight, Portable |
| Color | Gireyi |
Warranty uye Support
Yakakwana Warranty
mophie warrants its products against defects in material and workmanship under normal use for a period specified at the time of purchase. This warranty does not cover damage caused by misuse, accident, modification, or unauthorized repair. Please refer to the official mophie websaiti kune yazvino uye yakadzama waranti ruzivo.
Mutengi Support
For technical support, warranty claims, or further assistance, please visit the official mophie support website or contact their customer service department. You can find contact information and FAQs at www.mophie.com/support.
