Bhuku reMirayiridzo yeYESWELDER TIG-200P ACDC Aluminum Welder

Nhanganyaya

This manual provides detailed instructions for the safe and effective operation, setup, and maintenance of your YESWELDER TIG-200P ACDC Aluminum Welder. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.

Safety Information

Welding operations involve significant risks. Always adhere to safety precautions to prevent electric shock, fire, burns, and exposure to fumes. Ensure proper ventilation, wear appropriate personal protective equipment (PPE), and keep a fire extinguisher nearby.

Electric Shock: Can kill. Do not touch live electrical parts. Wear dry gloves and protective clothing.
Utsi uye Gasi: Can be hazardous to your health. Keep your head out of the fumes. Use enough ventilation and/or exhaust at the arc to keep fumes and gases away from the breathing zone.
Arc Rays: Can injure eyes and burn skin. Wear a welding helmet with a proper shade of filter to protect your face and eyes when welding or watching. Wear approved safety glasses with side shields under your helmet.
Moto uye Kuputika: Welding sparks can cause fire or explosion. Keep flammable materials away from the welding area.
Kupisa: Hot metal can cause severe burns. Do not touch hot parts with bare hands.

YESWELDER TIG-200P ACDC Welder with safety icons for overheating, water rating, overload, and electrostatic protection.

Figure 1: Safety Features of the TIG-200P ACDC Welder, including protection against overheating, overload, and electrostatic discharge, with an IP21 water rating.

Product Overview

The YESWELDER TIG-200P ACDC is a versatile 6-in-1 multi-process welding machine designed for various welding applications. It features a large LED display for clear parameter visibility and intuitive controls for ease of use.

YESWELDER TIG-200P ACDC Aluminum Welder with TIG torch, ground clamp, and electrode holder.

Figure 2: The YESWELDER TIG-200P ACDC Aluminum Welder and its included accessories.

Zvinokosha:

Yakakura LED Display: Provides clear visibility of welding parameters and settings.
6-in-1 Kusiyana-siyana: Combines STICK, AC TIG, DC TIG, AC Pulse TIG, DC Pulse TIG, and Spot Welding.
Dual Voltage: Operates on 110V/220V power.
High-Frequency (HF) Start: Ensures reliable, non-touch arc ignition.
Auto Memory Function: Automatically saves and recovers settings after power-off.
Portable Design: Weighs approximately 16.47 lbs (7.47 kg) for easy transport.
Foot Pedal Interface: 5-pin interface for optional foot pedal control.

Image showing the compact size and weight of the YESWELDER TIG-200P ACDC Welder, highlighting its portability.

Figure 3: The compact and portable design of the TIG-200P ACDC Welder, weighing only 16.47 lbs.

Kudzora Panel Pamusoroview

The control panel features a large LED display and intuitive buttons for selecting welding modes and adjusting parameters.

Diagram of the YESWELDER TIG-200P ACDC Welder's control panel with numbered components.

Mufananidzo 4: Detailed view of the TIG-200P ACDC control panel.

Welding Mode Button: Selects the desired welding process (STICK, TIG, Pulse TIG).
Operation Mode Button (Right): Adjusts parameters related to the right side of the display.
Operation Mode Button (Left): Adjusts parameters related to the left side of the display.
Welding Function Button: Selects specific welding functions (e.g., Hot Start, Arc Force, Spot Time).
Parameter Adjusting Knob: Used to increase or decrease selected parameter values.
Dhijitari Display: Shows current welding parameters and settings.

Setup uye Connection

Proper connection of welding accessories is crucial for safe and effective operation. Follow these steps for connecting your TIG-200P ACDC welder.

TIG Mode Connection:

Connect the control connector of the TIG torch to the machine and tighten it.
Connect the switch connector of the TIG torch to the machine and tighten it.
Insert the quick plug on the earth cable into the "+" quick connector on the machine panel, and tighten it. Clamp the workpiece with the work clamp at the other end of the earth cable.
Open the machine switch, adjust to TIG mode, and you can start to use.

Video 1: Demonstrates the connection process for TIG, STICK, and Foot Pedal modes on the TIG-200P ACDC Welder.

STICK Mode Connection:

Insert the quick plug on the earth cable into the "-" quick connector on the machine panel, and tighten it. Clamp the workpiece with the work clamp at the other end of the earth cable.
Insert the quick plug on the electrode holder into the "+" quick connector on the machine panel, and tighten it.
Open the machine switch, adjust to STICK mode, and you can start to use.

Foot Pedal Mode Connection:

The TIG-200P ACDC features a 5-pin foot pedal interface for enhanced control during welding.

Close-up of the 5-pin foot pedal interface on the YESWELDER TIG-200P ACDC Welder.

Figure 5: The 5-pin foot pedal interface for optional current control.

Unplug the switch connector of the TIG torch.
Connect the switch connector of the foot pedal to the machine, and tighten it.
When the foot pedal icon appears on the screen, it means that foot mode can be used.

Operating Modes

The TIG-200P ACDC offers multiple welding modes to suit various materials and applications.

Diagram illustrating six different welding processes: AC HF TIG, AC Pulsed TIG, Spot TIG, DC HF TIG, DC Pulsed TIG, and STICK welding.

Figure 6: The 6-in-1 multi-process capabilities of the welder.

STICK Welding (MMA): Suitable for general-purpose welding with coated electrodes.
DC TIG Welding: Ideal for stainless steel, carbon steel, copper, and other non-ferrous metals (except aluminum). Features High-Frequency (HF) start.
AC TIG Welding: Optimized for aluminum and magnesium alloys, providing a cleaning action to remove oxides. Features High-Frequency (HF) start.
DC Pulse TIG Welding: Offers enhanced control for thinner materials and reduced heat input on DC weldable metals.
AC Pulse TIG Welding: Provides precise control and improved weld quality for aluminum, especially on thinner sections.
Kukwesha Kwenzvimbo: For quick, localized welds.

Waveform diagrams for AC Square Wave TIG Welding and AC Pulsed TIG Welding, showing current and time parameters.

Figure 7: Waveform characteristics for AC Square Wave and AC Pulsed TIG welding.

The Squarewave AC/DC TIG inverter is software-controlled, allowing for precise adjustments to AC balance and frequency, which are critical for aluminum welding. AC mode is specifically optimized for cleaner and easier aluminum welding, while DC mode is used for steel and other metals.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine. Always disconnect power before performing any maintenance.

Kuchenesa: Periodically clean the machine's exterior and internal components (if accessible) to remove dust and debris. Use compressed air for internal cleaning.
Cable Inspection: Inspect all cables, including welding cables, power cords, and control cables, for cuts, fraying, or damage. Replace damaged cables immediately.
Connections: Ensure all connections are tight and free from corrosion. Loose connections can lead to overheating and poor performance.
Kutonhodza Fani: Iva nechokwadi chekuti feni inotonhodza haina zvipingamupinyi uye inoshanda nemazvo kudzivirira kupisa zvakanyanya.
Kugadziriswa kweTochi yeTIG: Regularly inspect and replace worn-out consumables such as collets, collet bodies, and ceramic nozzles. Keep the tungsten electrode sharp and clean.

Kugadzirisa matambudziko

This section addresses common issues you might encounter with your welder. For problems not listed here, contact customer support.

Dambudziko	Zvinogona Kukonzera	Solution
No Arc / Difficulty Starting Arc	Loose connections, incorrect gas flow, contaminated tungsten, wrong welding parameters.	Check all cable connections. Verify gas supply and flow rate. Clean or replace tungsten. Adjust welding parameters according to material.
Poor Weld Quality (Porosity, Inclusions)	Insufficient shielding gas, contaminated base metal, incorrect travel speed, improper filler rod.	Increase gas flow. Clean workpiece thoroughly. Adjust travel speed. Use appropriate filler rod.
Overheating Indicator On	Exceeded duty cycle, blocked ventilation, high ambient temperature.	Allow machine to cool down. Ensure clear airflow to cooling fan. Reduce welding time or current.
Muchina Usingabatike	No power supply, faulty power cord, internal fault.	Check power outlet and circuit breaker. Inspect power cord. Contact customer support if issue persists.

Zvinotsanangurwa

Detailed technical specifications for the YESWELDER TIG-200P ACDC Welder.

Feature	Detail
Model	TIG-200P ACDC
Mugadziri	YESWELDER
Item Weight	29 pounds (approx. 13.15 kg)
Package Dimensions	17.7 x 13.6 x 11.5 inches
Simba Source	AC/DC (110V/220V Dual Voltage)
Inosanganisirwa Zvikamu	TIG Welder
Cooling Mode	Fan Cooling
Insulation Grade	F
Protection Standard	IP21S

Detailed specification table for the YESWELDER TIG-200P ACDC Welder, showing input voltage, current, duty cycle, and other electrical parameters.

Figure 8: Electrical specifications and duty cycle information.

Warranty uye Support

The YESWELDER TIG-200P ACDC Welder comes with a 1-makore waranti. For technical assistance, troubleshooting, or warranty claims, please contact YESWELDER customer support.

Tsigiro yeVatengi: Available 24/7. Refer to the official YESWELDER websaiti kuti uwane ruzivo.
Zvekushandisa Pamhepo: Visit the YESWELDER Store on Amazon kune rumwe ruzivo rwechigadzirwa uye zvishongedzo.

	Bhuku reYesWelder TIG-205P PRO 3-in-1 Multiprocess Welder Gwaro rakakwana reYesWelder TIG-205P PRO, 110V/220V dual voltage, 200A 3-in-1 multiprocess welder inotsigira Stick, DC TIG, uye Pulse TIG welding. Inosanganisira magadzirirwo, maficha, uye mashandiro ekutanga.
	Bhuku reYeswelder TIG-200P ACDC PRO AC/DC IGBT Inverter Welder Bhuku rekushandisa rakakwana reYESWELDER TIG-200P ACDC PRO AC/DC IGBT Inverter Welder. Rinosanganisira nhungamiro dzekuchengetedza, zvirevo, kuiswa, nzira dzekushanda (STICK, TIG, Pulse, AC/DC), kugadzirisa, uye kugadzirisa matambudziko.
	Bhuku reYeswelder TIG-250P ACDC IGBT Inverter Welder Bhuku remutemo remushandisi weYESWELDER TIG-250P ACDC IGBT Inverter Welder. Dzidza nezvekuchengetedzeka, chigadzirwa pamusoroview, mabasa, hunyanzvi, mashandiro, uye kugadziriswa kwemuchina uyu wehunyanzvi wekunamira.
	YESWELDER CT520 4-in-1 Welder & Cutter Operator's Manual Iri bhuku remushandisi rinopa kuchengetedzeka kwakadzama, kutsanangurwa, kuisirwa, kushanda, kugadzirisa, uye ruzivo rwekugadzirisa matambudziko YESWELDER CT520 4-in-1 Welder & Cutter, inotsigira Stick, HF TIG, Pulse TIG, uye Plasma Kucheka mabasa.
	Bhuku rekushandisa reYESWELDER FLUX-135PRO 110V Gasless Flux-Core Welder Bhuku rekushandisa rakakwana reYESWELDER FLUX-135PRO 110V Gasless Flux-Core Welder. Rinovhara matanho ekuchengetedza, kuisa, kushanda, kugadzirisa, uye kugadzirisa matambudziko e flux-core, stick, uye TIG welding.
	YesWelder FIRSTESS DP200 IGBT Inverter Multi-Process Welder Bhuku reMushandi Bhuku rekushandisa rakakwana reYesWelder FIRSTESS DP200 IGBT Inverter Multi-Process Welder, rinosanganisira kugadzirisa, kushanda, kuchengetedzeka, uye kugadzirisa matambudziko eDual Pulse MIG, Flux-Cored, Lift TIG, uye Stick welding.

YESWELDER TIG-200P ACDC