Grundig 11562 Universal TV Remote Control User Manual

Nhanganyaya

This manual provides detailed instructions for the setup, operation, and maintenance of your Grundig 11562 Universal TV Remote Control. Please read this manual thoroughly before using the remote control to ensure proper functionality and to maximize your viewing experience.

Mufananidzo: Mberi view of the Grundig 11562 Universal TV Remote Control, showing its button layout.

Gadzirira

1. Kuiswa kwebhatiri

1. Tsvaga bhatiri kuseri kweremote control.
2. Svetera chivharo chebhatiri pasi kana kunze kuti uvhure.
3. Insert two AAA or AA alkaline batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment. (Cherechedza: Mabhatiri haana kubatanidzwa.)
4. Tsiva chivharo chekamuri yebhatiri, uchiona kuti inodzvanya zvakachengetedzeka munzvimbo.

2. Kugadzira Remote Control

The Grundig 11562 is a universal remote control designed to work with various TV brands. Programming is typically required for initial use.

Method 1: Auto Code Search

1. Turn on your television manually.
2. Nongedza remote yakananga kuTV.
3. Press and hold the 'SET' button (or a similar programming button, refer to the remote's specific button layout) until the indicator light on the remote turns on.
4. While holding 'SET', press the 'POWER' button once. The indicator light should blink.
5. Release both buttons. The remote is now in auto-search mode.
6. Wait for the TV to turn off. This indicates that a compatible code has been found.
7. Immediately press the 'SET' button again to save the code. The indicator light will turn off.
8. Test the remote's functions (e.g., volume, channel, power). If not all functions work, repeat the process to find a better code.

Nzira 2: Kunyora Kodhi Nemaoko

If your TV brand has a specific code list (often provided with the remote or available online), you can enter it manually.

1. Turn on your television manually.
2. Locate the 3 or 4-digit code for your TV brand from the provided code list.
3. Press and hold the 'SET' button until the indicator light turns on.
4. Enter the code using the numeric keypad. After each digit, the indicator light should blink.
5. Once the last digit is entered, the indicator light should turn off.
6. Test the remote's functions. If it does not work, try another code from the list for your TV brand.

Kushandisa Remote Control

The Grundig 11562 remote control features 40 buttons for comprehensive TV control. Below are the general functions of common buttons:

• SIMBA: Batidza kana kudzima TV.
• MUTE: Inodzima kana kudzima ruzha rweTV.
• VOL +/-: Inowedzera kana kuderedza inzwi.
• CH +/-: Inoshandura chiteshi kumusoro kana pasi.
• Numeric Keypad (0-9): Yakananga nhamba dzechaneli.
• MENU: Inopinda mumenyu huru yeTV.
• ARROW/NAVIGATION Buttons: Navigates through TV menus and options.
• OK/PINDA: Inosimbisa zvakasarudzwa mumamenyu.
• Buda: Inobuda mune yazvino menyu kana basa.
• SOURCE/INPUT: Changes the input source (e.g., HDMI 1, AV).
• INFO: Inoratidza ruzivo rwechirongwa.

Note: Specific button labels and their exact functions may vary slightly depending on the TV model and the programmed code.

Maintenance

Kuchenesa

Kuti uchenese remote yako, shandisa jira rakapfava, rakaoma. Patsvina yakasindimara, zvishoma dampIsa jira nemvura kana muchina wekuchenesa usina kunyorova. Dzivisa kushandisa makemikari akaomarara kana hunyoro hwakawandisa, sezvo izvi zvinogona kukuvadza midziyo yemagetsi yeremote kana finish yayo.

Kutsiviwa kwebhatiri

Replace the batteries when the remote control's range decreases significantly or if the indicator light does not illuminate when a button is pressed. Always replace both batteries at the same time with new ones of the same type (AAA or AA alkaline).

Kugadzirisa matambudziko

• Remote isiri kushanda:
  • Tarisa kana mabhatiri akaiswa zvakanaka aine polarity chaiyo.
  • Tsiva mabhatiri ekare neatsva.
  • Ensure there are no obstructions between the remote and the TV's infrared sensor.
  • Reprogram the remote control using the setup instructions.
• Mamwe mabhatani chete anoshanda:
  • The current programmed code may not be fully compatible with your TV. Try reprogramming the remote using a different code for your TV brand or using the auto code search function again.
• Remote range is poor:
  • Dzorera mabhatiri.
  • Ensure you are within the maximum operating range of 10 meters and have a clear line of sight to the TV.

Zvinotsanangurwa

Warranty uye Support

For warranty information and specific support inquiries, please refer to the documentation provided with your purchase or contact your retailer. Grundig's official website may also provide additional support resources and contact details.