Manuals+

Lepro 410084-RGB-US-NF-a

Lepro 32.8ft RGB LED Strip Lights User Manual

Model: 410084-RGB-US-NF-a

1. Nhanganyaya

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.

Lepro 32.8ft RGB LED Strip Lights kit showing two rolls of LED strips, a remote control, and a power adapter.

Figure 1: Complete Lepro LED Strip Lights Kit

2. Package Zviri mukati

Tarisa kuti zvese zvirimo zviripo mupakeji:

  • 2 x 16.4ft (5m) RGB LED Strip Lights
  • 1 x 44-Key IR Remote Control
  • 1 x 12V Simba Adapter
  • 1 x Control Box (IR Receiver)

3. Kuiswa uye Setup

Tevedza nhanho idzi kuti uise zvakakodzera:

  1. Gadzirira Surface: Iva nechokwadi chekuti nzvimbo yekuisa yakachena, yakaoma, uye yakatsetseka. Guruva, mafuta, kana hunyoro zvinogona kukanganisa mashandiro echinamira.
  2. Kuyera uye Kucheka (Sarudzo): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
  3. Batanidza Chidzitiro: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
  4. Batanidza Zvikamu:
    • Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
    • Connect the 12V power adapter to the control box.
    • Batanidza dhiraivha yemagetsi mugetsi remagetsi.
  5. Activate Remote: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.
Diagram showing the connection of LED strip lights to the control box and power adapter, with an arrow indicating to pull out the plastic chip from the remote.

Figure 2: Connection Diagram for LED Strip Lights

For a visual guide on installation and various applications, please refer to the official product video below:

Video 1: Official Lepro LED Strip Lights Overview uye Application Examples. This video demonstrates the product's features and shows various installation scenarios in different rooms.

4. Operating Instructions

The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.

44-key IR remote control for LED strip lights, showing buttons for colors, brightness, and dynamic modes.

Figure 3: 44-Key IR Remote Control Layout

Remote Control Mabasa:

  • Pa/Kudzima: Power button to turn the lights on or off.
  • Kugadzirisa Kupenya: Up/Down arrows to increase or decrease brightness.
  • Kusarudzwa Kwemavara 20 preset static colors, including Red, Green, Blue, and White.
  • DIY Colors: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
  • Dynamic Modes: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.

5. Kuchengeta

To ensure the longevity and optimal performance of your LED strip lights, follow these maintenance guidelines:

  • Kuchenesa: Gently wipe the LED strips with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
  • Environment: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
  • Adhesive Care: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.

6. Kugadzirisa matambudziko

If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:

DambudzikoZvinogona KukonzeraSolution
Magetsi haabatike.
  • Power adapter haina kubatana.
  • Remote battery depleted or plastic tab not removed.
  • Incorrect connection between strip and control box.
  • Ensure power adapter is securely plugged into outlet and control box.
  • Remove plastic tab from remote battery. Replace battery if necessary.
  • Verify arrow alignment on all connectors.
Remote control haisi kushanda.
  • Remote not pointed at IR receiver.
  • Kuvharika pakati peremote nereceiver.
  • Remote battery issue.
  • Point remote directly at the small black IR receiver on the control box.
  • Bvisa chero zvipingamupinyi.
  • Check/replace remote battery.
Some LEDs show incorrect color or are off.
  • Damage to a section of the LED strip.
  • Kukanganisa kubatana.
  • Inspect the strip for physical damage. If a section is damaged, it may require replacement.
  • Ita shuwa kuti zvese zvinongedzo zvakachengeteka.
LED strip falls off surface.
  • Surface not clean or smooth.
  • Insufficient pressure during installation.
  • Clean the surface thoroughly before re-applying.
  • Apply firm, even pressure along the entire strip during installation. Consider using additional adhesive clips for heavy-duty applications.

7. Zvigadzirwa zveChigadzirwa

FeatureDetail
BrandLepro
Model Number410084-RGB-US-NF-a
ColorRGB (Dzvuku, Girini, Bhuruu)
Indoor / Outdoor KushandiswaIndoor
Special FeatureDimmable
Chiedza Chinyorwa TypeLED
Simba SourceCorded Electric
MaterialMhangura, Plastiki
Controller TypeRemote Control
Nhamba Yechiedza Sources300 (total for 32.8ft)
Voltage12 Volts
Wattage36 watts
Item Weight0.33 Makirogiramu (11.6 ounces)
Item Length32.8 Feet (2 x 16.4ft)

8. Ruzivo rweWaranti

Ichi chigadzirwa chakafukidzwa ne 2-makore waranti from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9. Mutengi Tsigiro

For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.

Related Documents - 410084-RGB-US-NF-a

Preview Bhuku rekushandisa reLepro S1 Smart LED Strip Lights
Bhuku rekushandisa rakakwana reLepro S1 Smart LED Strip Lights (Model: 2A3MAS1), rinotsanangura zvese zvinodiwa pakuiswa, mashandiro, uye mashandisirwo azvo.
Preview Bhuku reMushandisi weLepro LED Light Strip uye Magadzirirwo
Bhuku rekushandisa reLepro LED Light Strips (Model PR4100067 series). Rinosanganisira ruzivo rwekuisa, kuchengetedzeka, magadzirirwo, uye kuraswa kwemidziyo.
Preview Lepro S1 Smart LED Strip Light: Kuisa, Zvinhu, uye Gwaro Rekuchengetedza
Gwaro rakakwana reLepro S1 Smart LED Strip Light, rinosanganisira kuiswa, kubatana kweapp, kubatanidzwa kwekudzora izwi, matanho ekuchengetedza, hunyanzvi, uye ruzivo rwewarandi.
Preview Bhuku reVashandisi neGwaro reKuchengetedza reLepro AI LED Permanent Outdoor Lights
Gwaro rakakwana remwenje yekunze inogara iripo yeLepro AI LED, inofukidza kuiswa, kubatana kweapp, kudzora izwi, matanho ekuchengetedza, uye hunyanzvi hwemamodheru E1-30, E1-60, uye E1-90.
Preview Kuisa Lepro R2 Smart LED Downlight uye Gwaro Rekushandisa
Gwaro rakakwana rekuisa nekushandisa Lepro R2 Smart LED Downlight, rinofukidza kubatana kweapp, kugadzirisa kudzora inzwi, kuisa, uye ruzivo rwekuchengetedza.
Preview Bhuku reMushandisi weLepro ZB1 AI LED Outdoor String Lights uye Magadzirirwo
Bhuku rekushandisa rakakwana uye zvirevo zvehunyanzvi zvemwenje yekunze yeLepro ZB1 AI LED, maficha akajeka, ruzivo rwekuisa, uye kutevedzera mitemo.