Bhuku reMirayiridzo yeWayne WST33 1/3 HP Submersible Sump Pump

1. Nhanganyaya

This manual provides essential instructions for the safe installation, operation, and maintenance of your Wayne WST33 1/3 HP Submersible Thermoplastic Sump Pump. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and adherence to these guidelines will ensure optimal performance and longevity of your sump pump.

2. Safety Information

YAMBIRO: Kukundikana kutevedzera mirairo iyi yekuchengetedza kunogona kukonzera kuvhunduka kwemagetsi, moto, kukuvara kwakanyanya, kana rufu.

Always disconnect power to the pump before performing any service or maintenance.
Ensure the pump is connected to a properly grounded 120V AC GFCI (Ground Fault Circuit Interrupter) protected outlet.
Usashandise pombi netambo yakakanganiswa kana plug.
Do not use this pump for flammable or corrosive liquids. It is designed for water only.
Keep hands and feet clear of the pump inlet and discharge openings when the pump is connected to power.
Usasimudze pombi netambo yayo yemagetsi.
Iva nechokwadi chekuti sump basin is free of debris that could obstruct the pump or float switch.

3. Chigadzirwa Pamusoroview

The Wayne WST33 is a robust 1/3 HP submersible sump pump constructed from reinforced thermoplastic, designed for reliable water removal in sump applications. It features a piggyback tether float switch for automatic or manual operation and a unique top suction design to minimize clogging.

Zvinokosha:

Horsepower: 1/3 HP oil-filled motor.
Kuvaka: Reinforced thermoplastic for durability.
Kuyangarara chinja: Piggyback tether float switch for automatic or manual control.
Kudzivirira Kuvhara: Unique top suction design reduces clogging and prevents air lock.
Discharge: 1.5-inch NPT discharge for standard plumbing connections.
Power Cord: 8-foot waterproof power cord.
Kubudirira: Energy-efficient operation with a maximum flow rate of 3000 GPH.

Wayne WST33 Sump Pump with Piggyback Tether Float Switch

Figure 1: Wayne WST33 Submersible Sump Pump. This image displays the black, reinforced thermoplastic pump unit with its integrated handle, power cord, and piggyback tether float switch. The base of the pump shows the intake screen and the threaded discharge port.

4. Setup uye Kuiswa

The WST33 sump pump is designed for straightforward installation, typically completed within 15 minutes. Follow these steps for proper setup:

Sump Basin Kugadzirira: Ensure your sump basin has a minimum diameter of 14 inches to accommodate the pump and allow for proper float switch operation. Clean the basin of any debris, gravel, or sediment.
Kuisa Pombi: Place the pump on a solid, level surface at the bottom of the sump basin. Avoid placing it directly on dirt or gravel, which could lead to clogging.
Discharge Pipe Connection: Connect a 1-1/2 inch NPT discharge pipe to the pump's outlet. It is recommended to use a check valve (not included) in the discharge line to prevent water from flowing back into the sump basin kana pombi yadzima.
Kugadziriswa kweSwitch inoyangarara: The piggyback tether float switch controls the pump's automatic operation. Adjust the tether length to achieve the desired ON and OFF levels. The recommended ON level is 14 inches and the OFF level is 7 inches. Ensure the float switch can move freely without obstruction by the pump, basin walls, or piping.
Power Connection: Plug the pump's 8-foot waterproof power cord into a dedicated 120V AC GFCI-protected electrical outlet. Do not use extension cords.
Test Operation: Zadza sump basin with water to verify the pump turns on and off correctly at the desired levels. Observe the discharge flow and ensure no leaks are present.

5. Kushanda

The Wayne WST33 sump pump can operate in two modes: automatic or manual, controlled by its piggyback tether float switch.

Automatic Operation:

For automatic operation, plug the pump's power cord into the piggyback plug, and then plug the piggyback plug into the GFCI-protected outlet. The pump will automatically turn on when the water level rises to the float switch's ON level (approximately 14 inches) and turn off when the water level drops to the OFF level (approximately 7 inches).

Manual Operation:

To operate the pump manually, unplug the pump's power cord from the piggyback plug and plug the pump's power cord directly into the GFCI-protected outlet. The pump will run continuously until unplugged. Use manual operation for quick water removal or testing, but do not leave unattended for extended periods.

The unique top suction design helps prevent air lock conditions, ensuring consistent pumping performance.

6. Kuchengeta

Regular maintenance ensures the efficient and reliable operation of your sump pump. Always disconnect power before performing any maintenance.

Inspect Sump Basin: Tarisa nguva nenguva sump basin for accumulated debris, silt, or gravel. Clean the basin as needed to prevent pump obstruction.
Tarisa Chinja Chinoyangarara: Ensure the float switch moves freely and is not obstructed by wires, pipes, or the basin walls. Manually lift the float to verify the pump activates.
Ongorora Impeller: While the pump's top suction design reduces clogging, occasionally inspect the intake screen and impeller for any lodged debris. Clear any obstructions carefully.
Power Cord Inspection: Tarisa tambo yemagetsi kuti uone kana paine zviratidzo zvekukuvadzwa, kupwanyika, kana kucheka. Tsiva kana yakakuvara.
Macheki emwaka: Perform more thorough checks before heavy rain seasons or after extended periods of inactivity.

7. Kugadzirisa matambudziko

If your Wayne WST33 sump pump is not operating as expected, refer to the following troubleshooting guide:

Dambudziko	Zvinogona Kukonzera	Solution
Pombi haibatike.	No power to the pump. Float switch obstructed or faulty. Motor zadzisa.	Check GFCI outlet, circuit breaker. Ensure power cord is securely plugged in. Clear obstructions around float switch. Test float switch manually. Replace if faulty. Allow motor to cool. Check for impeller obstructions.
Pombi inomhanya ichienderera.	Float switch stuck in ON position. Check valve faulty or missing. Continuous water inflow.	Clear obstructions around float switch. Adjust tether length. Replace if faulty. Install or replace check valve in discharge line. Identify and address source of excessive water inflow.
Pombi inomhanya asi haibvisi mvura.	Discharge pipe clogged or frozen. Impeller yakavharwa. Air lock condition.	Inspect and clear discharge pipe. Ensure it's not frozen. Disconnect power, remove pump, and clear impeller/intake screen. The WST33's top suction design minimizes air lock, but ensure the pump is fully submerged and the discharge line is clear.
Pombi ine ruzha rwakanyanya.	Debris mune impeller. Pump not sitting level. Worn bearings (less common for new pump).	Disconnect power and clear impeller. Ensure pump is on a stable, level surface. Contact customer support if noise persists and pump is new.

Kana matanho ekugadzirisa matambudziko akasagadzirisa dambudziko racho, taura nerutsigiro rwevatengi kuti uwane rumwe rubatsiro.

8. Zvinotsanangurwa

Model	WST33
Type	Automatic Submersible Sump Pump
Application	Plumbing (Sump Water Removal)
Horsepower	1/3 HP (0.33 HP)
Voltage	120 V
Ampage	9.5 A
Max Flow Rate	Magaroni 3000 Paawa (GPH)
Flow Rate @ 10 ft. Head	2130 GPH
Flow Rate @ 5 ft. Head	2610 GPH
Flow Rate @ 15 ft. Head	1404 GPH
Kubuda Kukura	1-1/2 inch NPT
Power Cord Kureba	8 tsoka
Kurema	9 makirogiramu
Zvinhu Zvokuvaka	Thermoplastic Yakasimbiswa
Impeller Chinyorwa	Scratch resistant glass reinforced polycarbonate
Zvibvumirano	cULus Agency, UL/CSA

9. Warranty uye Tsigiro

Warranty Yakakwana:

The Wayne WST33 Sump Pump comes with a 2-makore mashoma waranti from the date of purchase. This warranty covers defects in material and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or contact the manufacturer.

Tsigiro yeVatengi:

For technical assistance, warranty claims, or to order replacement parts, please contact Wayne customer support. Have your model number (WST33) and date of purchase ready when contacting support.

Contact information for Wayne customer support can typically be found on the product packaging or the manufacturer's official website.

	Mapombi eWayne Submersible Sump: Bhuku reKuisa, Kushanda, uye Kugadzirisa Bhuku rekushandisa rakakwana rekuisa mapombi eWayne submersible sump, rinofukidza mashandiro, kuchengetedzeka, matambudziko, uye ruzivo rwakaganhurirwa rwewarandi. Rinosanganisira zvirevo nedata rekushanda kwemamodheru akasiyana-siyana.
	Mapombi eWayne Submersible Sump: Bhuku reKuisa, Mashandiro, uye Zvikamu Gwaro rakakwana rekuisa, kushanda, kugadzirisa matambudziko, uye gwarandi reWayne Submersible Sump Pumps, kusanganisira zvirevo, ruzivo rwekushanda, uye mirairo yekugadzirisa.
	Mapombi eSump eWayne Submersible: Bhuku reKuisa neKugadzirisa Gwaro rakakwana remapombi emvura anonyudzwa mumvura eWayne, rinofukidza kuiswa, mashandiro, matambudziko, uye kugadziriswa. Rinosanganisira marongero, madhayagiramu, uye ruzivo rwewarandi yemamodheru akasiyana-siyana.
	Gwaro reKuisa Sisitimu yeSump yeWayne Submersible uye Warranty Gwaro rakakwana rekuisa uye ruzivo rwewarandi yeWayne Submersible Sump Systems, kusanganisira kushanda kwepombi yekutanga neyekuchengetedza, kusunungura, uye marongero echigadzirwa.
	Mirayiridzo yeKushanda kweWayne Submersible Sump Pump uye Bhuku reZvikamu This manual provides operating instructions, troubleshooting guidance, and parts lists for Wayne submersible sump pumps, including models FLS790, FLS800, SPF33, SPF50, SSCDU800, SSPF50, CDU790, CDU790HH, CDU800, and CDU980. It covers installation, operation, maintenance, safety precautions, and warranty information.
	Mirayiridzo yeKushanda kweWayne Submersible Sump Pump uye Bhuku reZvikamu Comprehensive guide for Wayne submersible sump pumps (FLS790, FLS800, SPF33, SPF50, SSCDU800, SSPF50, CDU790, CDU790HH, CDU800, CDU980), covering operation, installation, maintenance, troubleshooting, and parts. Includes safety warnings and limited warranty information.

Wayne WST33