FEIN 18V Cordless 4-Speed Drill/Driver ASCM18QM User Manual

1. Nhanganyaya

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your FEIN 18V Cordless 4-Speed Drill/Driver, model ASCM18QM. Please read this manual thoroughly before using the tool and keep it for future reference.

Figure 1: User operating the FEIN 18V Cordless 4-Speed Drill/Driver.

2. Safety Information

Always observe general power tool safety warnings and instructions provided with the product. Failure to follow all instructions may result in electric shock, fire, and/or serious injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.

• Pfeka kudzivirira maziso: Always wear appropriate eye protection when operating the drill/driver.
• Chengetedza workpiece: Always secure the workpiece to prevent movement during operation.
• Shandisa zvishongedzo zvakarurama: Shandisa zvishongedzo chete zvakagadzirirwa chishandiso ichi.
• Chengeta maoko akachena: Chengetedza maoko uye zvipfeko zvakasununguka kure nezvikamu zvinofamba.
• Bvisa magetsi: Bvisa bhatiri paki usati waita chero zvigadziriso, kushandura zvishandiso, kana kuchengetedza chishandiso.

3. Package Zviri mukati

Tarisa kuti zvinhu zvese zvakanyorwa pazasi zvinosanganisirwa mupakeji yako:

• 2 rechargeable batteries (Li-ion)
• 1 yekukurumidza charger ALG 80
• 1 QuickIN drill chuck
• 1 bhandi clip
• 1 bit garage
• 1 mubato
• 1 chishandiso kesi

Figure 2: The FEIN 18V Cordless 4-Speed Drill/Driver shown with its included accessories, including batteries, charger, and chuck.

4. Setup

4.1 Kuchaja Bhatiri

1. Connect the rapid charger ALG 80 to a power outlet (120V60H).
2. Insert the Li-ion battery into the charger. The charger's indicator light will show the charging status.
3. Kana yanyatsochajiswa, bvisa bhatiri muchaja.

4.2 Kubatanidza Battery Pack

Slide the charged battery pack into the base of the drill/driver until it clicks securely into place.

4.3 Attaching the QuickIN Drill Chuck

The QuickIN MAX accessory interface allows for fast changes between applications.

1. Ita shuwa kuti chishandiso chakadzimwa uye bhatiri rabviswa.
2. Align the QuickIN drill chuck with the spindle of the drill/driver.
3. Push the chuck onto the spindle and twist clockwise until it locks securely.
4. To remove, twist counter-clockwise and pull the chuck off.

Mufananidzo 3: Pedyo-kumusoro view of the FEIN 18V Cordless 4-Speed Drill/Driver, highlighting the QuickIN chuck system.

5. Operating Instructions

5.1 Kubatidza/Kudzima

Press the trigger switch to turn the tool on. Release the trigger switch to turn it off.

5.2 Speed ​​​​Sarudzo

The drill/driver features a 4-speed solid metal gearbox, providing optimum speeds for various applications.

• Speed 1 & 2: Lower speeds for high torque applications like driving large screws or drilling large holes in metal.
• Speed 3 & 4: Higher speeds for faster drilling in metal or other materials.

Use the speed selector switch located on the top of the tool to choose the desired speed setting.

5.3 Drilling in Metal

1. Select an appropriate drill bit for the material and desired hole size.
2. Choose a lower speed setting (1 or 2) for larger diameter bits or tougher metals.
3. Isa zvakadzikama, kunyange kumanikidza. Usamanikidza chibooreso.
4. Use cutting fluid when drilling metal to prolong bit life and improve cutting performance.

5.4 Zvikuruu zvekutyaira

1. Isa yakakodzera screwdriver bit muchuck.
2. Select a lower speed setting (1 or 2) for driving screws, especially self-drilling screws, to maintain control and prevent stripping.
3. Adjust the torque setting on the clutch collar to prevent over-tightening or stripping screw heads.
4. Apply firm, consistent pressure in line with the screw.

6. Kuchengeta

Kugaro gadzirisa kunovimbisa kuita kwakaringana uye kunowedzera hupenyu hwechishandiso chako.

• Kuchenesa: Chengetedza maburi ekufemesa emudziyo akachena kudzivirira kupisa zvakanyanya. Shandisa nyoro, damp cloth to clean the housing. Do not use harsh chemicals.
• Battery Care: Chengetedza mabhatiri munzvimbo inotonhorera, yakaoma. Usavaisa kune tembiricha yakanyanyisa. Chaja mabhatiri nguva nenguva, kunyangwe asiri kushandiswa, kuchengetedza hutano hwavo.
• Chuck Maintenance: Nguva nenguva geza shaya dzemachuck kuti uve nechokwadi chekuti zvidimbu zvakabatirira zvakanaka.
• Kuongorora: Regularly inspect the power tool for any signs of damage, loose screws, or worn parts. Have any damaged parts repaired by a qualified service technician.

7. Kugadzirisa matambudziko

Usati wabata rutsigiro rwevatengi, tarisa kune zvinotevera zvinowanzoitika uye mhinduro:

8. Zvinotsanangurwa

9. Ruzivo rweWaranti

Your FEIN 18V Cordless 4-Speed Drill/Driver ASCM18QM comes with a 1+2 year warranty with online tool registration. Please register your tool on the official FEIN website to activate the extended warranty period. Keep your proof of purchase for warranty claims.

10. Mutengi Tsigiro

For technical assistance, spare parts, or service, please contact FEIN customer support:

• Websaiti: Visit the official Fein websaiti ye FAQ uye zviwanikwa zvekutsigira.
• Runhare: Refer to your regional FEIN contact information for phone support.
• Service Centers: Locate authorized FEIN service centers for repairs.