ANKO GFCI Outlet 20 Amp 4 Pack User Manual

1. Introduction to GFCI Outlets

A Ground Fault Circuit Interrupter (GFCI) outlet is a fast-acting circuit breaker designed to shut off electric power in the event of a ground fault within as little as 1/40 of a second. It is designed to protect people from severe or fatal electric shocks. This ANKO GFCI outlet features self-testing capabilities, an LED indicator, and is tamper-resistant and weather-resistant for both indoor and outdoor applications.

Four ANKO GFCI outlets in white, showing the test and reset buttons and LED indicators.

Image 1.1: Four ANKO GFCI 20 Amp Outlets. These outlets are designed for safety, featuring test and reset buttons and an LED indicator for status.

Diagram highlighting features of the ANKO GFCI outlet: UL Listed, Tamper Resistant, Weather Resistant, 20A/125V/2500W with LED Indicator, Standard Wall Plate & Screws Included, Performs a Self-Test Every 40 Seconds, Back and Side Wire, Cannot be reset if mis-wired.

Image 1.2: Key features of the ANKO GFCI outlet, including UL listing, tamper and weather resistance, self-test function, and wiring options.

Diagram explaining what a GFCI is, showing the green LED indicator for proper function and the red light for end-of-life, and the self-test blinking red light.

Image 1.3: Explanation of GFCI functionality, illustrating how it protects against ground faults and the meaning of its LED indicators.

2. Chii chiri muBhokisi

Your ANKO GFCI Outlet package includes the following components:

GFCI Outlet (20 Amp)
Decorator Wall Plate
Mounting Screws
Complete Installation Instructions (this manual)

3. Ruzivo Rwakakosha Chekuchengetedza

Please read and understand all instructions before installing or using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

YAMBIRO: Dzima magetsi pa circuit breaker kana pa fuse box usati waisa waya.
Kuisa kwacho kunofanira kuitwa nenyanzvi yemagetsi kana munhu ane ruzivo rwakakura anoziva nezvewaya dzemagetsi.
Do not use this device with aluminum wiring. Use only with copper or copper-clad wire.
Iva nechokwadi chekuti waya dzese dzakabatana dzakachengeteka uye dzakadzivirirwa zvakanaka.
This GFCI is designed for 20 Amp, 125 Volt, 60HZ circuits. Do not exceed these ratings.
The tamper-resistant feature helps prevent accidental insertion of foreign objects into the receptacle openings, enhancing child safety.
The weather-resistant feature provides enhanced protection against moisture and UV degradation, making it suitable for damp kana nzvimbo dzakanyorova.

4. Zvigadzirwa zveChigadzirwa

Feature	Tsanangudzo
Model Number	ANKPS-301-4P
Yemagetsi Rating	20 Amp, 125 Volt, 60 Hz
Product Dimensions	4.2 x 1.8 x 1.6 inches (Nzvimbo yekubuditsa)
Wall Plate Dimensions	4.6"L x 2.7"W
Kurema	1.48 Pounds (per 4-pack)
Material	High-impact resistant thermoplastic, Plastic, Stainless Steel
Certifications	UL Listed (YGB-095WR)
Features	Self-Test, LED Indicator, Tamper-Resistant, Weather-Resistant

Diagram showing the dimensions of the ANKO GFCI outlet and its wall plate.

Image 4.1: Dimensions of the ANKO GFCI outlet and its accompanying decorator wall plate.

5. Kuisa Nongedzo

Follow these steps carefully to install your ANKO GFCI outlet. Installation typically takes about 10 minutes.

5.1. Kugadzirira

ZVINOKOSHA: Turn off power to the circuit at the main service panel (circuit breaker or fuse box) before beginning work. Verify power is off using a voltage muedzo.
Remove the existing wall plate and outlet from the electrical box.
Carefully pull the wires out of the electrical box.

5.2. Wiring Connections

Identify the wires in your electrical box:

LINE Wires: These wires bring power from the circuit breaker. Typically, the black wire is the Hot (LINE Hot) and the white wire is the Neutral (LINE White).
LOAD Wires: These wires carry power to downstream outlets or devices protected by this GFCI. Typically, the black wire is the Hot (LOAD Hot) and the white wire is the Neutral (LOAD White).
Waya yevhu: This is typically a bare copper or green insulated wire.

The ANKO GFCI outlet supports both back-wire and side-wire connections. For side-wire connections, strip wires approximately 1 inch (2.5 cm) and wrap 2/3 of the way around the screw.

Detailed wiring diagram for the ANKO GFCI outlet, showing connections for Grounding Terminal, LINE White Terminal, LINE Hot Terminal, LOAD White Terminal, and LOAD Hot Terminal.

Image 5.1: Terminal identification on the ANKO GFCI outlet for proper wiring.

5.3. Wiring Scenarios

Scenario A: One Cable (2-3 Wires) Entering the Box

This scenario is common when the GFCI is at the end of a circuit or is the only outlet on a branch.

Batanidza iyo LINE Hot (black) wire from the electrical box to the LINE Hot Terminal (brass screw) on the GFCI.
Batanidza iyo LINE Neutral (white) wire from the electrical box to the LINE White Terminal (silver screw) on the GFCI.
Batanidza iyo Ground (bare copper or green) wire from the electrical box to the Nzvimbo Inodzikisira (green screw) on the GFCI. If the box has a grounding terminal, connect the ground wire from the cable to it, then run a pigtail to the GFCI's grounding terminal.
Cap off or insulate the LOAD terminals on the GFCI. Do not connect any wires to the LOAD terminals in this scenario.

Scenario B: Two Cables (4-6 Wires) Entering the Box

This scenario is used when the GFCI will protect other downstream outlets or devices.

Connect the incoming LINE Hot (black) wire to the LINE Hot Terminal (brass screw) on the GFCI.
Connect the incoming LINE Neutral (white) wire to the LINE White Terminal (silver screw) on the GFCI.
Connect the outgoing LOAD Hot (black) wire to the LOAD Hot Terminal (brass screw, typically covered by yellow tape) on the GFCI.
Connect the outgoing LOAD Neutral (white) wire to the LOAD White Terminal (silver screw, typically covered by yellow tape) on the GFCI.
Batanidza zvese Ground wires (bare copper or green) together with a wire connector, then run a pigtail to the Nzvimbo Inodzikisira (green screw) on the GFCI. If the box has a grounding terminal, connect the ground wires from the cables to it, then run a pigtail to the GFCI's grounding terminal.

Wiring diagrams for GFCI installation: one cable (2-3 wires) and two cables (4-6 wires) entering the electrical box, showing connections to LINE and LOAD terminals.

Image 5.2: Detailed wiring diagrams for common installation scenarios: single cable and dual cable connections.

5.4. Matanho Ekupedzisira

Carefully push the wired GFCI outlet back into the electrical box.
Secure the GFCI to the electrical box using the provided mounting screws.
Attach the decorator wall plate using the provided screws.
Dzorera simba pabhodhi guru rebasa.
Press the RESET button on the GFCI. The green LED indicator should illuminate, indicating proper function.
Ita iyo TEST procedure as described in the "Operating Instructions" section to ensure proper operation.

6. Operating Instructions

6.1. Mamiriro eChiratidzo che LED

Green LED AKAbatidza: The GFCI is functioning correctly and providing protection.
Dzvuku LED VAKADZIDZA: The GFCI has reached its end-of-life and can no longer provide ground fault protection. It must be replaced immediately.
Red LED Blinking (briefly, every 40 seconds): This indicates the automatic self-test is occurring. This is normal operation.
No LED ON (when power is present): The GFCI is tripped or malfunctioning. Press the RESET button. If it does not reset, check wiring or replace the unit.

6.2. Manual Test Procedure

It is recommended to test your GFCI outlet monthly to ensure proper operation.

Plug alamp or radio into the GFCI receptacle and turn it ON.
Press the TEST bhatani. The lamp/radio should turn OFF, and the GFCI should trip (the RESET button will pop out, and the green LED may turn off or a red LED may appear depending on the model's specific indicator behavior after trip).
Press the RESET bhatani. The lamp/radio should turn ON, and the GFCI should reset (the RESET button will go in, and the green LED should illuminate).
If the GFCI does not trip when the TEST button is pressed, or if it does not reset when the RESET button is pressed, it is malfunctioning and must be replaced.

6.3. Automatic Self-Test

Your ANKO GFCI outlet performs an automatic internal self-test every 40 seconds to confirm its ability to respond to a ground fault. During this brief test, the red LED may blink once. This is a normal function and indicates the GFCI is continuously monitoring its protective capabilities.

7. Kuchengeta

Regularly test the GFCI outlet monthly as described in the "Operating Instructions" section.
Keep the outlet clean. Wipe with a dry, soft cloth. Do not use liquid cleaners or aerosols.
If the red LED illuminates continuously, the GFCI has reached its end-of-life and needs to be replaced.
Do not attempt to repair the GFCI outlet. If it malfunctions, replace it with a new one.

8. Kugadzirisa matambudziko

Dambudziko	Zvinogona Kukonzera	Solution
GFCI will not reset (RESET button won't stay in).	No power to the GFCI. Ground fault detected (e.g., faulty appliance, wet conditions). Mis-wired (LINE and LOAD reversed). GFCI has reached end-of-life. Kukuvadza kwemukati.	Tarisa wedunhu breaker/fuse. Unplug all appliances from the GFCI and any downstream outlets. Try resetting. If it resets, plug appliances back in one by one to identify the faulty one. Verify wiring connections (LINE and LOAD) are correct. Turn off power before checking. If red LED is on, replace the GFCI. Replace the GFCI.
GFCI inofamba kazhinji.	Faulty appliance or wiring. Kutakura zvakanyanya padunhu. Moisture in the circuit (for weather-resistant installations).	Identify and remove the faulty appliance. Reduce the number of devices plugged into the circuit. Ensure proper sealing and protection from moisture for outdoor/damp nzvimbo.
Green LED is off, but power is present.	GFCI yakagumburwa. GFCI is at end-of-life. Kusashanda zvakanaka kwemukati.	Dzvanya bhatani reRESET. If red LED is on, replace the GFCI. Replace the GFCI.

9. Warranty uye Tsigiro

ANKO products are manufactured to high-quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official ANKO website. Ndapota chengetedza humbowo hwako hwekutenga kwezvichemo zvewaranti.

For further assistance, you may contact ANKO customer support through their official channels. Always provide your product model number (ANKPS-301-4P) when seeking support.

	Anko Low Voltage 4ft Santa Inflatable: Installation and Safety Guide Gwaro rakazara reAnko Low Voltage 4ft Santa Inflatable, covering installation, safety warnings, and adaptor manual. Model JT-DC12V9W-F3, Keycode 43069835.
	Anko Bluetooth Mvura Inodzivirira Ruvara Inoyangarara Inoyangarara Mutauri Wekushandisa Gwaro remushandisi weAnko Bluetooth Mvura-Inodzivirira Ruvara Inoyerera Inoyerera Mutauri (Modhi 43206056), inotsanangura zvakatemwa, mirairo yekushandiswa, mabhatani mabasa, uye akakosha ekuchengetedza.
	Anko Mvura Inodzivisa Mutauriri Dhadha User Manual Chinyorwa chemushandisi cheAnko Mvura Inodzivirira Mutauri Duck (Modhi: EBS-24106), inotsanangura maitiro ayo, mashandiro, zvakatemwa, uye ruzivo rwewaranti.
	Anko 43308026 Kisimusi Battery Inoshandiswa Chiedza Kumusoro NepaNorth Pole Sign - Mushandisi Wekushandisa Yakadzama mirairo uye gwara regungano reAnko 43308026 Kisimusi Bhatiri Inoshandiswa Chiedza Kumusoro NekuNorth Pole Sign. Dzidza maitiro ekumisikidza, kushandisa, uye kutarisira kushongedza kwako kwezororo rezororo.
	Anko Low Voltaguye Kisimusi Lamp Positi: Kuchengetedzwa, Kuiswa & Gwaro Rekugadzika Gwaro rakazara reAnko Low Voltaguye Kisimusi Lamp Positi (Modhi: JT-DC4.5V3.6W-E3, Keycode: 43069231). Inosanganisira yambiro dzakakosha dzekuchengetedza, mirairo yekuisa nhanho nhanho, uye ruzivo rwekuungana kwekushandisa mukati nekunze.
	Bhuku reMirayiridzo yeAnko Collapsible Bath Bhuku remirayiridzo yeAnko Collapsible Bath, kusanganisira kuungana, kupatsanurwa, ruzivo rwemushandisi, uye yambiro dzakakosha dzekuchengetedza dzekushandisa nevacheche nevana. Rine chiratidzo chekupisa uye ruzivo rweKmart Australia neNew Zealand.

ANKO ANKPS-301-4P

ANKO GFCI Outlet User Manual