Product Overview
The Milesight MS-C2972-FIPB is a 2MP Pro Dome IP Day/Night Network Camera designed for robust surveillance applications. It features remote focus and zoom capabilities, an IK10 vandal-proof and IP66 weather-resistant casing, and advanced imaging technologies like 140 dB WDR (Wide Dynamic Range) and Smart IR II for superior image quality in varying light conditions.
This camera supports H.265 video compression for efficient storage and bandwidth usage, and includes a 256GB MicroSD card slot for on-board storage. It is fully ONVIF compliant, ensuring broad compatibility with various network video recorders (NVRs) and video management systems (VMS).
Key Features
- Motorized Zoom and Focus: Allows for remote adjustment of the camera's field of view uye kupinza.
- IK10 Vandal-proof & IP66 Weather-resistant: Ensures durability and protection against impact and harsh environmental conditions, suitable for outdoor use.
- 140 dB WDR: Provides clear images in scenes with strong contrast, such as bright backlighting.
- Smart IR II: Advanced infrared technology for uniform illumination in low-light conditions, preventing overexposure of close objects.
- H.265+ Compression: Reduces bandwidth and storage requirements significantly compared to older compression standards.
- 256GB MicroSD Support: Enables on-board storage for local recording and redundancy.
- Full ONVIF Compliance: Ensures interoperability with a wide range of surveillance equipment.
- SIP/VoIP Support: Integrates voice and video over IP for enhanced communication capabilities.
Setup uye Installation
Package Zviri mukati
Usati watanga kuisa, ita shuwa kuti zvese zvikamu zviripo:
- Milesight MS-C2972-FIPB IP Camera
- Kuisa Template
- Mounting Screws uye Wall Plugs
- Chinongedzo Chisingapindi Mvura cheEthernet Cable
- Quick Start Guide
Kuisa Kamera
The MS-C2972-FIPB is designed for ceiling mount installation. Follow these steps:
- Gadzirira iyo Mounting Surface: Choose a suitable location on a ceiling or wall that can support the camera's weight and provides the desired field of view.
- Detach the Mounting Plate: Rotate the camera body counter-clockwise to detach it from the mounting plate. This plate will be secured to the surface first.
- Mark Drill Holes: Use the provided mounting template to mark the positions for drilling holes on the mounting surface.
- Drill Holes: Drill holes according to the marked positions. Insert wall plugs if mounting on a masonry surface.
- Chengetedza Mounting Plate: Attach the mounting plate to the surface using the provided screws.
- Batanidza Cables: Route the Ethernet cable through the mounting plate and connect it to the camera's RJ45 port. Ensure a waterproof connection using the supplied connector for outdoor installations. If not using PoE, connect the DC12V power supply.
- Batanidza Muviri weKamera: Align the camera body with the mounting plate and rotate clockwise until it locks securely into place.
Network Connection and Initial Setup
The camera supports Power over Ethernet (PoE) for simplified installation, requiring only one Ethernet cable for both power and data. Alternatively, it can be powered by a 12V DC adapter.
- Batanidza kune Network: Connect the camera to your network switch or router using an Ethernet cable. If using PoE, ensure your switch supports PoE (802.3af).
- Kamera yeDiscover: Use the Milesight Smart Tools software (available on the Milesight website) to discover the camera on your network.
- Isa kero ye IP: Assign a static IP address or configure DHCP for the camera.
- Access Web Interface: Vhura a web browser uye isa IP address yekamera kuti uwane mukana wayo web interface.
- Kutanga Login: Log in using the default username and password (refer to the Quick Start Guide for default credentials). It is highly recommended to change the default password immediately for security.
- Firmware Dzokorora: Check for and install any available firmware updates to ensure optimal performance and security.
Kushandisa Kamera
Remote Focus and Zoom
The MS-C2972-FIPB features a motorized varifocal lens, allowing you to adjust the zoom and focus remotely from the camera's web interface or compatible NVR/VMS software. This eliminates the need for manual adjustment at the camera's physical location.
Video Configuration
Access the "Video" settings in the web interface kugadzirisa:
- Resolution: Up to 1920x1080 (2MP).
- Frame Rate: Adjust for desired smoothness of video.
- Kudzvanya: Select H.265+, H.265, H.264+, H.264, or MJPEG. H.265+ is recommended for efficiency.
- Bit Rate: Configure constant (CBR) or variable (VBR) bit rates.
- Mifananidzo Settings: Adjust brightness, contrast, saturation, sharpness, WDR, and noise reduction.
- Privacy Masking: Define up to 8 areas to be masked for privacy concerns.
Audio Configuration
The camera includes a built-in microphone and supports two-way audio via an audio output interface. Configure audio settings under the "Audio" section:
- Kudzvinyirira Audio: G.711, AAC, G.722, G.726.
- Maikorofoni Kuwana: Adjust sensitivity of the built-in microphone.
- Nzira mbiri Audio: Enable and configure for interactive communication.
Storage and Recording
The camera supports local storage on a MicroSD card up to 256GB. Configure recording schedules, motion detection recording, and continuous recording options in the "Storage" settings.
SIP/VoIP Integration
The MS-C2972-FIPB supports SIP/VoIP for voice and video-over-IP functionality. This allows for integration with VoIP systems for advanced communication and monitoring. Refer to the "System" or "Network" settings for SIP/VoIP configuration.
Maintenance
Kuchenesa
- Lens and Dome Cover: Regularly clean the camera lens and the transparent dome cover with a soft, clean cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution specifically designed for optical surfaces. Avoid harsh chemicals that could damage the coating.
- Kamera Body: Pukuta muviri wekamera nekushambadziraamp jira rekubvisa guruva nemarara.
Firmware Dzokorora
Periodically check the Milesight official website for new firmware versions. Keeping the firmware updated ensures optimal performance, introduces new features, and addresses potential security vulnerabilities.
- Dhawunirodha yazvino firmware file from the Milesight support page.
- Pinda kamera web interface and navigate to the "System" or "Maintenance" section.
- Follow the on-screen instructions to upload and install the firmware. Do not power off the camera during the update process.
Mafungiro Ezvakatipoteredza
Although the camera is IP66 rated for weather resistance, extreme conditions can still affect performance. Ensure proper drainage around the camera if installed in areas prone to heavy rain or snow accumulation. Avoid direct exposure to prolonged strong sunlight if possible, as this can affect image quality and component lifespan.
Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Kamera haisi kushanda. | No power supply; PoE not active; faulty cable. | Check power adapter/PoE switch. Ensure Ethernet cable is properly connected and functional. |
| Cannot access camera via web browser. | Incorrect IP address; network connectivity issue; firewall blocking. | Verify IP address. Check network cable. Temporarily disable firewall on PC. Use Milesight Smart Tools to discover camera. |
| Poor image quality (blurry, dark, overexposed). | Lens out of focus; incorrect image settings; dirty lens/dome; insufficient IR illumination. | Adjust focus remotely. Configure brightness, contrast, WDR, and IR settings. Clean lens and dome cover. |
| No video recording to MicroSD card. | MicroSD card full/faulty; recording schedule not configured; motion detection not triggered. | Check MicroSD card status and format if necessary. Verify recording schedule and motion detection settings. |
| Vandalism or physical damage. | External impact. | The camera is IK10 vandal-proof, but extreme force can still cause damage. Contact support for repair options. |
Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Model Number | MS-C2972-FIPB |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Max. Image Resolution | 1920x1080 (2MP) |
| Min. Kuvhenekera | Color: 0.002Lux@F1.2; B/W: 0Lux with IR on |
| Lens Type | Motorized P-IRIS varifocal 3.0~10.5mm (Optional: 2.7~13.5mm/ 7~22mm) |
| IR Distance | Up to 50m (3.0~10.5mm lens); Up to 90m (7~22mm lens) |
| Video Compression | H.265+/ H.265(HEVC)/ H.264+/ H.264/MJPEG |
| WDR | 140 dB Super WDR |
| Audio I/O | Yakavakirwa-mukati Maikorofoni uye 1 Audio Output interface |
| Storage | Support micro SD/SDHC/SDXC Card, up to 256GB |
| Network inowanikwa | 1*RJ45 10M/100M Ethernet Port |
| Kugarisana Kwehurongwa | ONVIF Profile G&Q&S&T, API |
| Magetsi | PoE (802.3af) / DC12V±10% |
| Kushandisa Simba | 8W Max; 12W Max (With IR on) |
| Dimensions | Φ143mm x 108.4mm (5.63 x 4.27 x 4.27 inches) |
| Kurema | Approx. 3.28 makirogiramu |
| Ingress Dziviriro | IP66 |
| Vandal Resistance | IK10 |
Warranty uye Support
Specific warranty details for the Milesight MS-C2972-FIPB camera are typically provided at the point of purchase or can be found on the official Milesight website. Ndapota chengetedza humbowo hwako hwekutenga kwezvichemo zvewaranti.
For technical support, product inquiries, or service requests, please visit the official Milesight support portal or contact their customer service. Contact information is usually available on the manufacturer's website.
Note: This manual provides general guidance. For detailed technical specifications and advanced configurations, please refer to the complete product documentation available on the Milesight official website.
