1. Nhanganyaya
Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.
Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.
2. Chii chiri muBhokisi
Ndokumbira utarise zvirimo pasuru kuti uone kuti zvinhu zvese zviripo:
- 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
- 1 x 44-Key IR Remote Control
- 1 x 24V Power Adapter (US Plug)
3. Safety Information
Read all safety instructions before installation and use. Keep this manual for future reference.
- Indoor Use Chete: This product is designed for indoor use and is not waterproof.
- Magetsi: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
- Installation Surface: Iva nechokwadi chekuti nzvimbo yekuisa yakachena, yakaoma, uye yakatsetseka kuti inamire zvakanaka.
- Kucheka Strip: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
- Dzivisa Kuwedzeredza: Do not coil the LED strip tightly when powered on, as this can cause overheating.
- Vana uye Zvipfuwo: Keep the product and its components out of reach of children and pets.
4. Setup & Installation
Tevedza nhanho idzi kuti uise zvakakodzera:
- Gadzirira Surface: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
- Kuyera uye Kucheka (kana zvichidikanwa): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
- Batanidza Chidzitiro: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
- Batanidza Simba: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
- Activate Remote: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.
Figure 2: Visual guide for LED strip installation steps.
Figure 3: Connection diagram and remote activation.
Figure 4: 3M Adhesive and Fixing Clips.
5. Operating Instructions
Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.
Figure 5: 44-Key IR Remote Control Layout.
Remote Control Mabasa:
- Pa/Kudzima: Power button to turn the lights on or off.
- Kugadzirisa Kupenya: Shandisa iyo ↑ uye ↓ buttons to increase or decrease brightness.
- Kusarudzwa Kwemavara Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
- DIY Colors: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
- Dzvanya a DIY bhatani.
- Shandisa iyo ↑ uye ↓ arrows next to R, G, B to adjust the intensity of each primary color.
- Dhinda zvakafanana DIY button again to save your custom color.
- Sarudzo yeModhi: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
- FLASH: Jumps between colors.
- FADE3/FADE7: Fades between 3 or 7 colors.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- AUTO: Cycles through all modes.
- KUDYA/KUNONONZA: Adjusts the speed of dynamic modes.
Figure 6: Remote control in use for ambient lighting.
6. Kuchengeta
Proper maintenance ensures the longevity of your LED strip lights.
- Kuchenesa: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Kuchengeta: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
- Dzivisa Kupeta: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.
7. Kugadzirisa matambudziko
Kana ukasangana nematambudziko, tarisa kune anotevera akajairika matambudziko uye mhinduro:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Magetsi haabatike. |
|
|
| Remote control haidaire. |
|
|
| Mavara haana kururama kana kuti haawirirani. |
|
|
8. Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Brand | Lepro |
| Model Number | PR410116-RGB-US |
| Chiedza Chinyorwa Type | LED (5050 SMD) |
| Chiedza Rudzi | RGB (Red, Green, Blue) + White, 16 Multicolored Options, 6 DIY Colors |
| Urefu | 39.4 ft (12m) |
| Voltage | 24 Volts (Power Adapter) |
| Wattage | 18 Watts (Max Compatible) |
| Kudzora Nzira | 44-Key IR Remote Control |
| Special Feature | Color Changing, Dimmable, 8 Dynamic Modes |
| Indoor / Outdoor Kushandiswa | Indoor Chete |
| Material | Mhangura, Plastiki |
| Item Weight | 9.6 ounces |
| Ruvara Rendering Index (CRI) | 85.00 |
Figure 7: ETL Listed 24V Power Adapter.
9. Warranty & Tsigiro
Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro website.
Contact Information:
- Websaiti: www.lepro.com (Ndokumbira utarise mukuru websaiti yeruzivo rwemazuva ano rwekuonana.)
- Email: Tarisa kurongedza kwechigadzirwa kana website.