Sharkoon RGB SLIDER WT Mid-Tower PC Case User Manual

1. Nhanganyaya

The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view yezvikamu zvemukati.

Mufananidzo 1.1: Kumberi view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.

2. Package Zviri mukati

Ndokumbira utarise kuti zvinhu zvese zviripo mupakeji:

• Sharkoon RGB SLIDER WT PC Case
• 1x 120mm Rear Fan (pre-installed)
• Accessory Box (containing screws, cable ties, and this manual)

3. Zvinotsanangurwa

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.

4. Setup uye Kuiswa

4.1. Kugadzirira

Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.

4.2. Motherboard Installation

1. Install the I/O shield into the designated slot at the rear of the case.
2. Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
3. Chengetedza motherboard uchishandisa screws dzakapihwa.

Mufananidzo 4.1: Mukati view of the PC case, showing the motherboard mounting area and pre-installed rear fan.

4.3. Kuiswa kweChigadziko cheMagetsi (PSU)

1. Locate the PSU tunnel at the bottom rear of the case.
2. Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
3. Chengetedza PSU ne screws kubva kumashure kwebhokisi.

4.4. Storage Device Installation

The case supports 3.5" HDDs and 2.5" SSDs.

• MaHDD e3.5": Install into the drive cage located within the PSU tunnel.
• MaSSD e2.5": Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.

Image 4.2: Rear interior view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.

4.5. Expansion Card Installation (e.g., GPU)

1. Bvisa zvivharo zvePCIe slot zvinodiwa kubva kumashure kwekesi.
2. Insert the expansion card into the corresponding PCIe slot on the motherboard.
3. Secure the card with screws.

4.6. Fan Installation (Optional)

Additional fans can be installed at the front and top of the case.

• Front Fans: Remove the front panel to access the mounting points for up to three 120mm fans.
• Top Fans: Mount up to two 120mm or 140mm fans to the top panel.

4.7. Cable Management

Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.

5. Operating Instructions

5.1. Powering On

After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

Mufananidzo 5.1: Pamusoro view of the case, detailing the front I/O panel with USB ports and audio jacks.

5.2. RGB Lighting Control

The front RGB LED strip can be controlled in two ways:

• Built-in Controller: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
• Motherboard ARGB Sync: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).

5.3. Front Panel Ports

Panera repamberi reI/O rinopa mukana uri nyore wekuwana:

• 2x USB 3.0 ports for high-speed data transfer.
• 1x USB 2.0 port for general peripherals.
• Audio In (microphone) and Audio Out (headphone) jacks.

6. Kuchengeta

6.1. Kuchenesa

• Kunze: Pukuta nzvimbo dzekunze nekanyoro, damp jira. Dzivisa abrasive cleaners.
• Dust Sefa: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
• Mukati: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.

6.2. Kuyerera kwemhepo

Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.

7. Kugadzirisa matambudziko

7.1. System Does Not Power On

• Verify that the power cable is securely connected to both the PSU and the wall outlet.
• Ensure the PSU's power switch is in the 'ON' position.
• Check that the front panel power button cable is correctly connected to the motherboard's front panel header.
• Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.

7.2. Fans Not Spinning

• Tarisa kubatana kwesimba refeni nebhodhibhodhi reamai kana chinodzora feni.
• Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.

7.3. Mwenje weRGB Hausi Kushanda

• If using the built-in controller, press the RGB button to cycle modes.
• If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
• Verify that the motherboard's RGB software is installed and configured correctly.

7.4. Panel Yepamberi USB/Audio Ports Haisi Kushanda

• Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
• Ensure motherboard drivers are installed.

8. Warranty uye Tsigiro

Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.

For further assistance, please visit the official Sharkoon websaiti: www.wejako.com