Nhanganyaya
This manual provides detailed instructions for the safe and effective operation of your Theefun 2500CFM Fog Machine with 9 LED Lights. Please read this manual thoroughly before initial use and retain it for future reference. This fog machine is designed to produce atmospheric fog effects for various events, including parties, stages, and special occasions, enhanced by integrated LED lighting.
Safety Information
- Zvekushandisa Mumba uye Kunze: Ita shuwa kuti muchina waiswa panzvimbo yakagadzikana, nhanho.
- Fog Fluid: Use only high-quality, water-based fog fluid specifically designed for fog machines. Do not use flammable liquids or other substitutes. Fog fluid is not included.
- Kufefetedza Ensure adequate ventilation around the machine to prevent overheating. Do not block air vents.
- Nzvimbo Dzinopisa The nozzle and surrounding areas become very hot during operation. MUSAKUBATA the nozzle or machine housing during or immediately after use. Allow sufficient time for cooling.
- Kuchengetedzwa Kwemagetsi: Batanidza muchina kune soketi yemagetsi yakadzika pasi nevol yakakodzeratage (AC 100-200V/60Hz or AC 220V-240V/50Hz). Do not overload electrical circuits.
- Ramba Kure Nevana: Ichi chigadzirwa hachisi chekutamba nacho. Chengetedza kure nevana nemhuka dzinovaraidza.
- Overheat Protection: The machine is equipped with overheat protection. If the temperature becomes too high, it will automatically cut off power. Allow the unit to cool down for a few minutes before resuming operation.
- Liquid Level: Monitor the fog fluid level. Operating the machine without sufficient fluid can cause damage.
Package Zviri mukati
Tarisa uone kuti zvinhu zvese zviripo mupakeji:
- Theefun Fog Machine Unit
- Wireless Remote Control
- Power Cable
- Mushandisi Chinyorwa (gwaro iri)
Product Overview
Familiarize yourself with the components of your fog machine:
Tsanangudzo yemufananidzo A labeled diagram of the Theefun Fog Machine. Key components identified include the carrying handle, the liquid tank, the fog outlet with 9 LED lights surrounding it, the main ON/OFF power switch, the dedicated Fog button, the power socket with fuse protection, and an oil level indicator for the fog fluid tank.
- Bata: Kuti zvive nyore kutakura.
- Tangi: Reservoir for fog fluid (500ml capacity).
- Fog Outlet: Where fog is emitted.
- 9 LEDs: Integrated lights around the fog outlet for color effects.
- ON/OFF Bhatani: Main power switch yeyuniti.
- Fog Button: Manual button to activate fog output.
- Simba Chigadziko: Connection point for the power cable, includes fuse protection.
- Mafuta Level: Indicator to monitor the amount of fog fluid in the tank.
Setup Instructions
Tevera matanho aya ekutanga kuseta:
- Kuiswa: Place the fog machine on a flat, stable, and heat-resistant surface. Ensure there is clear space around the machine for proper ventilation and fog dispersion.
- Fill Fog Liquid: Unscrew the cap of the liquid tank and carefully pour appropriate fog fluid into the tank. Ensure the metal nozzle inside the tank is fully immersed in the fluid. Do not overfill.
- Batanidza Simba: Insert the power cable into the power socket on the back of the machine, then plug the other end into a suitable grounded electrical outlet.
- Power On: Flip the main ON/OFF switch to the 'ON' position. The machine will begin to preheat. The initial warm-up time is approximately 3-5 minutes. Subsequent warm-ups will take 1-2 minutes.
- Wait for Ready: The machine is ready for operation once the preheating cycle is complete.
Tsanangudzo yemufananidzo A visual guide illustrating the setup process. Step 1 shows pouring fog liquid into the tank. Step 2 depicts connecting the power cable and turning on the main switch. Step 3 indicates the preheating time. Step 4 shows pressing the 'ON' button on the remote to activate fog output.
Operating Instruction
The Theefun Fog Machine can be operated using the included wireless remote control.
Tsanangudzo yemufananidzo The wireless remote control for the fog machine, displaying buttons for fog activation and LED light control. Below, a grid of images shows the fog machine emitting fog in various colors, demonstrating the 12 color options and 3 color modes.
Remote Control Mabasa:
- FOG ON/OFF: Press the 'FOG ON' button to initiate fog output. Press 'FOG OFF' to stop. The machine will spray for 20-30 seconds, then automatically preheat again. You must press the 'FOG ON' button after each preheating cycle to continue fog output.
- Akatungamirira ON / Off: Press the 'LED ON' button to turn on the LED lights. Press 'LED OFF' to turn them off.
- Color Modes: The remote allows you to switch between 12 single-color modes, 2 color-changing modes, and a white flashing mode. Refer to the remote control for specific color buttons.
General Operation:
- Once the machine has preheated, press the 'FOG ON' button on the remote. Fog will be emitted from the nozzle.
- Select your desired LED light color or mode using the corresponding buttons on the remote.
- Monitor the fog fluid level during extended use. Refill as necessary to prevent damage.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your fog machine.
- Kuchenesa: After every 40 hours of continuous operation, or if the machine shows signs of reduced output, it is recommended to run a cleaning solution through the system. Use a commercially available fog machine cleaning solution or a mixture of 80% distilled water and 20% white vinegar. Run this solution through the machine for 10-15 minutes in a well-ventilated area.
- Kucheneswa Kwekunze: Wipe the exterior of the machine with a soft, dry cloth. Do not use abrasive cleaners or allow liquids to enter internal components.
- Kuchengeta: When not in use, ensure the machine is completely cool and drained of any remaining fog fluid. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Fuse Replacement: If the machine does not power on, check the fuse located near the power socket. Replace with a fuse of the same type and rating if necessary.
Kugadzirisa matambudziko
Kana ukasangana nematambudziko, tarisa kune anotevera akajairika matambudziko uye mhinduro:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Hapana mhute inobuda | Not enough fog fluid; Machine not preheated; Nozzle clogged; Remote battery dead. | Check fluid level and refill; Wait for warm-up indicator; Perform cleaning cycle; Replace remote battery. |
| Machine overheats and shuts off | Insufficient ventilation; Prolonged continuous use. | Ensure clear space around vents; Allow machine to cool down for several minutes before resuming. |
| Remote control haisi kushanda | Dead battery; Out of range; Obstruction. | Replace battery in remote; Ensure you are within 5-6 meters of the machine; Remove any obstructions between remote and machine. |
| Mwenje ye LED haisi kushanda | LEDs turned off; Internal fault. | Press 'LED ON' button on remote; If problem persists, contact customer support. |
Zvinotsanangurwa
Tsanangudzo yemufananidzo The Theefun Fog Machine displayed alongside a table of its technical specifications. The table details Voltage, Power, Tank Capacity, Warm Up Time, Remote Distance, and Output, providing a quick reference for the product's capabilities.
| Feature | Tsanangudzo |
|---|---|
| Model | 9 Leds Fog Machine |
| Voltage | AC 100-200V/60Hz or AC 220V-240V/50Hz |
| Simba | 450W |
| Tank Capacity | 500ml (0.132gal) |
| Nguva yekudziya | 3-5 minutes (first use), 1-2 minutes (subsequent uses) |
| Remote Distance | 5-6 mamita |
| Output | 2500 CFM (Cubic Feet paminiti) |
| Item Weight | 4.4 makirogiramu |
| Package Dimensions | 10.94 x 6.54 x 5.98 inches |
Warranty uye Support
Theefun products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Theefun websaiti. Ndapota ivai nemuenzaniso wechigadzirwa chenyu nezuva rekutenga kana muchibata rutsigiro.
