FOXWELL NT604 OBD2 Scanner and BT100 Pro Battery Tester User Manual

1. Nhanganyaya

This manual provides comprehensive instructions for the operation and maintenance of your FOXWELL NT604 OBD2 Scanner and BT100 Pro Battery Tester. These devices are designed to assist in diagnosing vehicle issues and assessing battery health, providing valuable information for vehicle maintenance.

The FOXWELL NT604 is an advanced diagnostic scan tool capable of reading and clearing fault codes, displaying live data, and performing various tests on key vehicle systems. The FOXWELL BT100 Pro is a professional battery analyzer designed to test 12V batteries, providing accurate readings on battery voltage, CCA, internal resistance, and overall health.

2. Setup

2.1 Kuburitsa Chishandiso

Carefully remove all components from the packaging. Verify that all items listed in the product packaging are present. Retain the packaging for future storage or shipping.

2.2 Yekutanga Simba-Kukwira

The NT604 scanner typically powers on when connected to a vehicle's OBD-II port. The BT100 Pro battery tester powers on when connected to a 12V battery.

Figure 2.1: The FOXWELL NT604 OBD2 Scanner and BT100 Pro Battery Tester.

3. Kushanda

3.1 FOXWELL NT604 OBD2 Scanner Operation

The NT604 scanner connects to your vehicle's On-Board Diagnostics II (OBD-II) port to access vehicle system information.

1. Tsvaga iyo OBD-II Port: The OBD-II port is usually located under the dashboard on the driver's side.
2. Batanidza Scanner: Plug the NT604's diagnostic cable into the vehicle's OBD-II port. The scanner will power on automatically.
3. Vehicle Communication: The scanner will attempt to establish communication with the vehicle's ECU (Engine Control Unit). Follow on-screen prompts.
4. Main Menu Navigation: Use the navigation buttons (up, down, left, right, OK, ESC) to select desired functions from the main menu. Common functions include:
   • Verenga Makodhi: Retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's systems.
   • Bvisa Makodhi: Erases DTCs from the vehicle's memory. Note: Clearing codes does not fix the underlying problem. Address the issue before clearing codes.
   • Live Data: Displays real-time sensor data from the vehicle.
   • Gadzira Furemu: Captures a snapshot of vehicle operating conditions at the time a fault code was set.
   • I/M Kugadzirira: Checks the status of emission-related monitors.
   • System Diagnostic: Accesses specific vehicle systems like Engine, ABS, SRS (Airbag), and Transmission for detailed diagnostics.

Figure 3.1: The NT604 scanner's main menu showing various OBDII functions.

Figure 3.2: The NT604 scanner's capability to diagnose Engine, ABS, SRS, and Transmission systems.

3.2 FOXWELL BT100 Pro Battery Tester Operation

The BT100 Pro is designed for testing 12V automotive batteries. It can perform tests both in-vehicle and out-of-vehicle.

1. Gadzirira Bhatiri: Ita shuwa kuti nzvimbo dzebhatiri dzakachena uye hadzina ngura.
2. Batanidza Tester:
   • Batanidza tsvuku clamp kune yakanaka (+) bhatiri terminal.
   • Batanidza dema clamp kune iyo yakaipa (-) bhatiri terminal.
   • The tester will power on automatically.
3. Sarudza Test Type:
   • In-Vehicle Test: For batteries installed in the vehicle.
   • Out-of-Vehicle Test: For standalone batteries.
4. Sarudza Bhatiri Type: Choose the correct battery type (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, GEL) from the menu. Incorrect selection may lead to inaccurate results.
5. Enter CCA Rating: Input the Cold Cranking Amps (CCA) rating found on the battery label.
6. Ita Muedzo: The tester will perform the analysis and display results such as:
   • Voltage
   • Kuyera CCA
   • Mukati Resistance
   • Mamiriro Ehutano (SOH)
   • Nyika Yekubhadhara (SOC)

Figure 3.3: The BT100 Pro supports both in-vehicle and out-of-vehicle battery testing.

Figure 3.4: The BT100 Pro provides detailed battery status including internal resistance, CCA, and health display.

4. Kuchengeta

4.1 Kuchenesa

Pukuta mudziyo nekanyoro, damp jira. Usashandise abrasive cleaners kana solvents. Ita shuwa kuti mudziyo waoma usati wachengeta.

4.2 Zvigadziriso zveSoftware

Periodically check the FOXWELL official website for software updates for the NT604 scanner. Updates can improve performance, add new features, and expand vehicle compatibility. Follow the instructions provided on the website for updating the device firmware.

4.3 Kuchengeta

Store the devices in a clean, dry environment, away from extreme temperatures and direct sunlight. Keep cables neatly coiled to prevent damage.

5. Kugadzirisa matambudziko

6. Zvinotsanangurwa

FOXWELL NT604 OBD2 Scanner

• Inotsigirwa Systems: Engine, ABS, SRS (Airbag), Transmission
• OBDII Modes: 10 modes (Read Codes, Clear Codes, Live Data, Freeze Frame, I/M Readiness, Component Test, O2 Monitor Test, On-Board Monitor Test, Retrieve Vehicle Info, Modules Present)
• Kunobva Simba: Vehicle OBD-II port

FOXWELL BT100 Pro Battery Tester

• Bhatiri Voltage: 12V
• Test Range: 100-1100 CCA
• Mhando dzebhatiri dzinotsigirwa: Regular Flooded, AGM Flat Plate, AGM Spiral, GEL
• Test Results: Voltage, CCA, Internal Resistance, State of Health (SOH), State of Charge (SOC)
• Kunobva Simba: Battery Powered (from the tested battery)

Mufananidzo 6.1: Example of battery test results displayed on the BT100 Pro.

7. Warranty uye Tsigiro

7.1 Ruzivo rweWaranti

FOXWELL products are covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official FOXWELL websaiti kune yakadzama waranti mazwi uye mamiriro.

7.2 Tsigiro yehunyanzvi

For technical assistance, software updates, or service inquiries, please contact FOXWELL customer support. Contact information can typically be found on the official FOXWELL websaiti kana mune chigadzirwa kurongedza.

Websaiti: www.foxwelltech.com (Eksample link, verify official site)