GYS 059856 Pendi Gobvu Gauge Bhuku reMushandisi

1. Nhanganyaya

This manual provides detailed instructions for the safe and effective use of the GYS 059856 Paint Thickness Gauge. This portable device is designed for quick and easy measurement of non-magnetic coatings (such as paint or film) on metallic surfaces. It is an essential tool for various applications including the processing industry, automotive repair, metal treatment, chemical industry, and goods inspection.

Ndapota verenga bhuku rino zvakakwana usati washandisa mudziyo uye chengeta kuti ugozoushandisa mune ramangwana.

2. Safety Information

• Always ensure the device is clean and dry before use.
• Usaisa mudziyo kune tembiricha yakanyanyisa, mwando, kana zuva rakananga.
• Dzivisa kudonhedza kana kuisa mudziyo kune zvinokanganisa zvakasimba.
• Usaedze kudimbura kana kugadzirisa mudziyo wega. Tarisa kune vashandi vanokwanisa kubasa.
• Chengetedza mudziyo usingasvikike nevana.
• Rasa mabhatiri zvine ungwaru maererano nemitemo yenzvimbo.

3. Chigadzirwa Pamusoroview

The GYS 059856 Paint Thickness Gauge features a compact design with an LCD display and intuitive controls.

Mufananidzo 1: Mberi view of the GYS 059856 Paint Thickness Gauge. The device is yellow with a black LCD screen at the top. Below the screen are three black buttons: 'MODE' on the left, 'UNIT' on the right, and 'ZERO' with a power symbol in the center bottom.

3.1 Zvikamu Zvikuru

• Chiratidziro cheLCD: Shows measurement readings, units, and mode indicators.
• Bhotani reMODE: Used to switch between measurement modes (Single, Continuous, Differential).
• UNIT Bhatani: Used to switch between metric (µm) and imperial (mils) units.
• ZERO Button: Used for zero calibration and powering the device on/off.
• Measurement Probe: Located at the bottom of the device, used to contact the surface for measurement.

4. Setup

4.1 Kuiswa kwebhatiri

Locate the battery compartment on the back of the device. Insert the required batteries, ensuring correct polarity. Close the battery compartment securely.

4.2 Kubatidza/Kudzima

Dzvanya uye ubate iyo ZERO button to power on the device. To power off, press and hold the ZERO button again. The device also features an automatic shut-off function to conserve battery life.

5. Operating Instructions

The GYS 059856 offers three measurement modes and supports both metric and imperial units.

5.1 Kusarudza Zviyero zveKuyera

Press the UNIT button to toggle between metric (µm) and imperial (mils) units.

5.2 Measurement Modes

Press the MODE button to cycle through the following measurement modes:

• Single Measurement Mode: Takes a single reading each time the probe is placed on the surface.
• Continuous Measurement Mode: Continuously takes readings as the probe is moved across the surface.
• Differential Measurement Mode: Displays the difference between the current reading and a previously set reference value.

5.3 Kutora Chiyero

1. Ensure the surface to be measured is clean and free of debris.
2. Select the desired measurement unit and mode.
3. Place the measurement probe firmly and perpendicularly onto the coated metallic surface.
4. Verenga ukobvu hwakaratidzwa paLCD screen.
5. Lift the device from the surface to prepare for the next measurement (in Single mode).

6. Calibration

Accurate measurements depend on proper calibration. The device supports three calibration functions:

6.1 Zero Calibration

This calibration is performed on an uncoated, bare metallic surface to establish a zero reference point. Place the probe on a clean, uncoated metal surface and follow the on-screen instructions or refer to the device's specific calibration sequence (usually involving the ZERO bhatani).

6.2 Mapoinzi Maviri Calibration

This method uses two known thickness standards (e.g., a thin film and a thicker film) to calibrate the device across a range. This provides more accurate readings for varying thicknesses.

6.3 Easy Calibration

Refer to the device's specific instructions for "Easy Calibration," which may involve a simplified process for quick adjustments.

Note: Always calibrate the device before critical measurements or if you suspect inaccurate readings.

7. Kuchengeta

• Kuchenesa: Pukuta chigadziro nemucheka wakapfava, wakaoma. Usashandise abrasive cleaners kana solvents.
• Kuchengeta: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries.
• Probe Care: Keep the measurement probe clean and free from scratches or damage.

8. Kugadzirisa matambudziko

9. Zvinotsanangurwa

• Muenzaniso: GYS 059856
• Mugadziri: GYS
• Zviyero zveChigadzirwa (L x W x H): 10.5 x 6.1 x 2.8 cm
• Kurema 137 magiramu
• Measurement Principle: Non-magnetic coating on metallic surfaces
• Measurement Units: Metric (µm), Imperial (mils)
• Measurement Modes: Single, Continuous, Differential
• Calibration Functions: Zero calibration, 2-point calibration, Easy calibration
• Otomatiki Shut-off: Ehe
• ASIN: B09GS7G1N4
• Manufacturer Reference: 059856
• Spare Parts Kuwanikwa: Information is not available

10. Warranty uye Tsigiro

For warranty information and technical support, please refer to the official GYS website or contact your local distributor. Information regarding spare parts availability is not provided in the product specifications.

Mukuru weGYS Websaiti: www.gys.fr