Sound Town PAC360-6 Commercial Power Amplifier

1. Nhanganyaya

Ndatenda nekutengaasing the Sound Town PAC360-6 Commercial Power Amplifier. Izvi amplifier is designed for multi-zone public address (PA) applications, offering 360W RMS power output across 6 zones with individual volume control. It supports both 70V/100V constant voltage and 4-16 Ohm low impedance speaker systems. Featuring versatile input options including RCA, microphone, USB, FM radio, and Bluetooth connectivity, the PAC360-6 is suitable for various commercial environments such as restaurants, lounges, bars, schools, and warehouses. Please read this manual thoroughly before operation to ensure proper setup and safe use.

2. Mirayiridzo Yekuchengetedza

• Kunobva Simba: Connect the unit only to an AC 110V/230V 50/60Hz power source as indicated on the rear panel.
• Grounding: Iva nechokwadi chekuti mudziyo wacho wakadzika zvakanaka kuti usavhunduke nemagetsi.
• Kufefetedza Do not block ventilation openings. Maintain adequate space around the unit for proper airflow to prevent overheating.
• Unyoro: Do not expose the unit to rain or moisture. Avoid placing liquid-filled objects on the amplifier.
• Kupisa: Chengeta mudziyo uyu kure nezvinhu zvinopisa zvakaita sema radiator, ma heat registers, mastove, kana zvimwe zvinhu zvinopisa.
• Sevhisi: Usaedze kugadzirisa chivako ichi wega. Tumira vese vanogadzirisa chivako kune vashandi vane hunyanzvi.
• Kuchenesa: Bvisa mudziyo kubva pamagetsi usati wauchenesa. Shandisa jira rakaoma kuchenesa.

3. Package Zviri mukati

Tarisa uone kuti zvinhu zvese zviripo mupakeji:

• Sound Town PAC360-6 Commercial Power Amplifier
• Power Cable
• Remote Control
• FM Antenna
• Mushandisi Chinyorwa (gwaro iri)

4. Chigadzirwa Pamusoroview

4.1 Front Panel Controls

The front panel provides access to all primary controls and indicators for the amplifier.

Mufananidzo: Mberi view of the Sound Town PAC360-6 amplifier, showcasing its controls and the included remote control.

Mufananidzo: Zvakadzama view of the front panel controls, including power switch, input selectors, volume knobs, and display.

• SIMBA Switch: Inotendeuka ampanosimudza kana kuvhara.
• Indicators (PROT, CLIP, +6, +10): Display protection status, signal clipping, and output levels.
• ECHO/DELAY Controls: Adjust echo and delay effects for microphone inputs.
• ZONE 1-6 Volume Controls: Individual volume adjustments for each of the six output zones.
• MIC 1/MIC 2 Inputs: 1/4-inch (6.35mm) jack inputs for microphones. MIC 1 is a priority input.
• MIC VOL/MP3 VOL/LINE VOL Controls: Adjust volume levels for microphone, USB/Bluetooth/FM, and line inputs respectively.
• TREBLE/BASS Controls: Adjust the high and low frequency response of the overall output.
• MASTER VOL: Inodzora huwandu hwehuwandu hwekubuda kwe amplifier.
• Bhotani reMODE: Selects input source (Bluetooth, USB, FM, Line).
• Ratidza Sikirini: Inoratidza maitiro aripo, ruzivo rwe track, kana FM frequency.
• USB Port: Yekuridza odhiyo files kubva pa USB drive.
• Playback Controls: Play/Pause, Previous/Next track buttons for USB/Bluetooth/FM.

4.2 Rear Panel Connections

Panel yekumashure ine zvese zvinongedzo zvekupinda nekubuda zve amplifier.

Mufananidzo: Rear view of the Sound Town PAC360-6 amplifier, ichiratidza materminal ese ekupinda nekubuda.

Mufananidzo: Zvakadzama view of the rear panel connections, including RCA inputs, speaker outputs, and power input.

• INPUT (LINE 1, LINE 2, LINE 3): RCA stereo input jacks for connecting external audio sources (e.g., CD player, mixer).
• OUTPUT (LINE 1, LINE 2, LINE 3): RCA stereo output jacks for connecting to other amplifiers kana midziyo yekurekodha.
• DIRECT SPEAKER OUTPUT (COM, 4-16 Ohm, 70V, 100V): Terminals for connecting speakers. Use COM with 4-16 Ohm for low impedance speakers, or COM with 70V/100V for constant voltage masisitimu.
• 70V SPEAKER ZONE OUTPUT (COM, Z1-Z6): Screw terminals for connecting 70V speakers to individual zones.
• POWER SELECT (110V/230V): Voltage selector switch. Ensure this matches your local power supply before connecting.
• AC IN: Power cord inlet.
• FM ANTENNA: Connection for the included FM antenna.

5. Setup

5.1 Kuiswa

Place the amplifier on a stable, flat surface or mount it in a standard equipment rack. Ensure there is adequate ventilation around the unit to prevent overheating. Avoid placing it near heat sources or in direct sunlight.

5.2 Simba Connection

1. Verify the SIMBA SARUDZA switch on the rear panel matches your local power voltage (110V or 230V). Incorrect selection can damage the unit.
2. Batanidza tambo yemagetsi yakapihwa kune iyo AC IN port on the rear panel and then to a suitable wall outlet.

5.3 Zvisungo zveMutauriri

The PAC360-6 supports both low impedance (4-16 Ohm) and constant voltage (70V/100V) speaker systems. Do not mix these types of connections on the same output terminals.

Image: Diagram illustrating speaker output connections for both direct 4-16 Ohm and 70V/100V multi-zone setups.

Image: Visual representation of how the PAC360-6 amplifier can distribute audio to six independent zones.

5.3.1 70V/100V Speaker Zone Output

This method is ideal for multi-room applications using multiple speakers. Ensure all speakers have a 70V or 100V transformer.

1. Connect the negative ends of your speakers to the 'COM' terminal on the 70V SPEAKER ZONE OUTPUT block.
2. Connect the positive ends of each speaker to the designated zone terminals (Z1, Z2, Z3, Z4, Z5, Z6) to create independent zones.
3. Iyo yakazara wattage of all connected speakers in a 70V/100V system should not exceed the amplifier's rated power (360W).

5.3.2 Direct Speaker Output (4-16 Ohm / 70V / 100V)

Use these terminals for direct connection to a single speaker or a series of speakers. Note that the 4-16 Ohm output does not have separate zone volume control.

1. For 4-16 Ohm speakers: Connect the negative speaker wire to the 'COM' terminal and the positive speaker wire to the '4-16 Ohm' terminal.
2. For 70V speakers: Connect the negative speaker wire to the 'COM' terminal and the positive speaker wire to the '70V' terminal.
3. For 100V speakers: Connect the negative speaker wire to the 'COM' terminal and the positive speaker wire to the '100V' terminal.

5.4 Input Connections

1. RCA Line Inputs: Connect external audio sources (e.g., media players, mixers) to the LINE 1, LINE 2, or LINE 3 RCA input jacks on the rear panel.
2. Maikorofoni Inopinza: Connect microphones to the MIC 1 or MIC 2 1/4-inch jacks on the front panel. MIC 1 has priority over other inputs.
3. FM Kanyanga: Connect the included FM antenna to the FM ANTENNA terminal on the rear panel for radio reception.

6. Operating Instructions

6.1 Simba On/Kudzima

Press the SIMBA vhura paneri repamberi kuti utendeutse amplifier on or off. The power indicator will illuminate when the unit is on.

6.2 Sarudzo Yekupinza Kwemukati

Press the MODE button on the front panel or the remote control to cycle through available input sources: Bluetooth, USB, FM Radio, LINE 1, LINE 2, LINE 3.

6.3 Bluetooth Pairing

1. Select 'Bluetooth' mode using the MODE button. The display will show 'BT'.
2. On your Bluetooth-enabled device (e.g., smartphone, tablet), search for available devices and select 'Sound Town'.
3. Kana yangopetwa, unogona kufambisa odhiyo isina waya kune iyo amplifier.

6.4 Kushandisa Maikorofoni

1. Connect your microphone(s) to the MIC 1 or MIC 2 inputs.
2. Gadzirisa iyo MIC VOL bhatani rekudzora vhoriyamu yemaikorofoni.
3. Shandisa iyo ECHO uye KUNONOKA knobs to add effects to the microphone signal.
4. Note that MIC 1 is a priority input, meaning it will automatically lower the volume of other audio sources when used.

6.5 Zone Volume Control

Each of the six zones (Z1-Z6) has an independent volume control knob on the front panel. Adjust these knobs to set the desired audio level for each specific zone.

6.6 Master Volume, Bass, and Treble

• MASTER VOL: Adjust this knob to control the overall output volume of the amplifier.
• BASS/TREBLE: Use these knobs to fine-tune the low and high frequencies of the audio output to suit your preference or room acoustics.

6.7 FM Radio Kushanda

1. Ensure the FM antenna is connected.
2. Select 'FM' mode using the MODE bhatani.
3. Use the Previous/Next track buttons (or remote) to scan for radio stations.

7. Kuchengeta

• Kuchenesa: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or aerosols.
• Kufefetedza Regularly check that the ventilation openings are clear of dust and debris.
• Kuchengeta: If storing the unit for an extended period, ensure it is powered off, unplugged, and stored in a cool, dry place away from direct sunlight.

8. Kugadzirisa matambudziko

9. Zvinotsanangurwa

10. Warranty uye Tsigiro

Sound Town products are designed for reliability and performance. For specific warranty information and technical support, please refer to the warranty card included with your product or visit the official Sound Town website. Chengetedza risiti yako yekutenga sehumbowo hwekutenga kune chero vimbiso yewaranti.