AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Chigadzirwa Pamusoroview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Zvinokosha:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Kupinda muMultimedia: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Zvinotsanangurwa

3. Setup Guide

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Kusunungura

1. Bvisa bhokisi rePC nokungwarira kubva mupakeji yaro.
2. Remove any protective films or internal packaging materials.
3. Isa bhokisi panzvimbo yakatsiga, yakati sandara.

3.2 Kuisirwa mamaboardboard

1. Bvisa girazi rakapfava nekubvisa zvikukuru zvechigunwe.
2. Isa shield yeI/O (kana isina kuiswa kare pabhodhi reamai rako) muburi rekumashure rebhokisi.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Chengetedza motherboard uchishandisa screws dzakapihwa.

3.3 Kuisa Simba reMagetsi

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Chengetedza PSU ne screws kubva kumashure kwebhokisi.

3.4 Kuisa Dhiraivha Yekuchengetera Zvinhu

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Bvisa zvivharo zvekuwedzera zvinodiwa kubva kumashure kwekesi.
2. Isa kadhi rako remifananidzo kana mamwe makadhi ekuwedzera muPCIe slots iri pabhodhi rako reamai.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Kutonhodza System

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Cable Management

Shandisa ma cutouts ekufambisa tambo uye nzvimbo dzekusunga tambo dziri kuseri kwetireyi yemotherboard kuronga tambo. Izvi zvinovandudza kufamba kwemhepo uye runako.

4. Operating Instructions

4.1 Kubatidza/Kudzima

• To power on your PC, press the Simba button located on the top panel.
• To power off, either shut down through your operating system or press and hold the Simba bhatani kwemasekonzi mashoma.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• Chiteshi cheUSB 3.0 (x1): Zvekumhanyisa data data.
• USB 2.0 Zvidhori (x2): Zvekubatanidza peripherals.
• Maikorofoni Jack: Zvekupinza audio.
• HD Audio Jack: For audio output (headphones/speakers).
• Reset Bhatani: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Kuchengeta

Kugaro gadzirisa kunobatsira kuve nechokwadi chekuita kwakaringana uye hupenyu hurefu hwezvinhu zvePC yako.

5.1 Dust Sefa Yekuchenesa

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 General Kuchenesa

• Pukuta kunze kwekesi nekanyoro, damp jira. Dzivisa abrasive cleaners.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Kugadzirisa matambudziko

If you encounter issues with your PC case, consider the following common troubleshooting steps:

• Hapana Simba: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Mafeni Asiri Kutenderera/RGB Haasi Kushanda: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Kupisa zvakanyanya: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• MaPanel Epamberi Haasi Kushanda: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Warranty uye Tsigiro

7.1 Ruzivo rweWaranti

The AeroCool HEXFORMBKV2 PC case comes with a 2-makore waranti for parts. Please retain your proof of purchase for warranty claims.

7.2 Tsigiro yehunyanzvi

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's websaiti kana mune chigadzirwa kurongedza.

• AeroCool Official Websaiti: www.aerocool.io
• Imeyili Yekutsigira Mutengi: support@aerocool.io (Eksample, please verify on official websaiti)