Nhanganyaya
This manual provides detailed instructions for the installation, operation, and maintenance of your Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier. This system is designed to deliver high-fidelity audio for various indoor environments, including home theaters, bathrooms, living rooms, kitchens, and offices. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Package Zviri mukati
Tarisa kuti zvinhu zvese zvakanyorwa pazasi zvinosanganisirwa mupakeji yako:
- 1x Wall Mount Bluetooth Amplifier
- 1x AC Adapter
- 2x Zvikuru
- 2x 6.5-inch In-Ceiling Speakers
- 2x Speaker Wires
- 2x User Manuals (one for amplifier, one for speakers)
Gadzirira
This section guides you through the physical installation and wiring of your Herdio ceiling speaker system.
1. Amplifier Kuisirwa
Iyo mukati-madziro amplifier is designed for flush mounting in a standard wall plate size. Ensure you have appropriate wiring access before proceeding.
- Gadzirira Wall: Use the provided template (if applicable) to mark and cut an opening in the wall for the amplifier.
- Batanidza Power Cable: Connect the 12V DC power cable to the designated two-pin connector on the back of the amplifier module.
- Batanidza Audio Cable: Connect the audio cable to the three-pin connector on the back of the amplifier module.
- Secure Amplifier: Insert the amplifier module into the wall opening and secure it using the provided screws.
- Batanidza Chiso: Place the decorative faceplate over the installed amplifier woisunga.
2. Kuiswa kweMutauriri
The ceiling speakers are designed for flush mounting. Ensure you have appropriate ceiling space and wiring access.
- Kucheka Maka: Use the provided cutout template to mark the desired location for each speaker in the ceiling.
- Cut Opening: Carefully cut the circular opening in the ceiling according to the marked template. The cutout diameter is approximately 8.07 inches (20.5 cm).
- Bvisa Grille: Gently remove the magnetic grille from the front of each speaker.
- Batanidza Waya dzeMutauriri: Connect the speaker wires to the spring-loaded terminals on the back of each speaker. Ensure correct polarity: red wire to positive (+) terminal, black wire to negative (-) terminal.
- Isa Sipika: Insert the speaker into the ceiling opening. The mounting clamps will automatically engage.
- Simbisa Clamps: Use a screwdriver to tighten the screws on the front baffle of the speaker. This will rotate the mounting clamps and secure the speaker firmly in place.
- Replace Grille: Reattach the magnetic grille to the speaker.
3. Wiring Dhizaini
Connect the speaker wires from the ceiling speakers to the amplifier terminals. Ensure correct polarity for both speakers (red to +, black to -).
4. Simba Connection
Connect the AC adapter to a standard 120V power outlet and then plug the DC end into the amplifier's power input. The power LED on the amplifier will illuminate.
Video: This video demonstrates the unboxing, wiring, Bluetooth pairing, and installation process for the Herdio 6.5-inch Bluetooth Ceiling Speakers Set.
Operating Instruction
Learn how to use your Herdio ceiling speaker system.
1. Simba On / Off uye Volume Control
Turn the knob on the amplifier clockwise to power on the unit and increase the volume. Turn it counter-clockwise to decrease volume and power off. You will hear an audible drop sound when powering on.
2. Bluetooth Kubatanidza
After powering on, the blue Bluetooth indicator light will flash, indicating it is in pairing mode. On your smart device (phone, tablet, etc.), search for available Bluetooth devices and select 'Herdio'. Once connected, the blue light will remain solid.
3. Input Selection
Use the input selection switch on the amplifier to choose between Bluetooth (BT), Auxiliary (AUX), or Microphone (MIC) input modes.
4. USB Functionality
The USB port functions as a flash memory reader for media playback and also provides a charging port for your devices (5V/1A).
5. Microphone Inzwa Zvinotaurwa
Connect a microphone to the 1/4-inch MIC IN jack for paging or voice applications.
Maintenance
To ensure the longevity and optimal performance of your Herdio ceiling speakers and amplifier, teverai nhungamiro idzi dzekuchengetedza:
- Kuchenesa: Shandisa jira rakapfava, rakaoma kuchenesa amplifier faceplate and speaker grilles. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- Kubvisa Dust: Periodically use a soft brush or a low-power vacuum with a brush attachment to gently remove dust from the speaker grilles.
- Environmental Conditions: Ensure the speakers and amplifier are installed in environments free from excessive moisture, extreme temperatures, and direct sunlight. The product is not waterproof.
- Wiring Inspection: Periodically check all wiring connections to ensure they are secure and free from corrosion or damage.
Kugadzirisa matambudziko
If you encounter issues with your Herdio ceiling speaker system, refer to the following common problems and solutions:
- Hapana Simba:
- Ensure the AC adapter is securely plugged into a working power outlet and the amplifier's DC input.
- Check if the power knob on the amplifier is turned clockwise to the 'ON' position.
- Tarisa kuti magetsi emagetsi ari kushanda nekuisa imwe mudziyo.
- Hapana Ruzha Runobva KumaSpeaker:
- Confirm that the speaker wires are correctly connected to both the speakers and the amplifier, observing proper polarity (+ to +, - to -).
- Ensure the volume knob on the amplifier yakasimudzwa.
- Check the input selection switch on the amplifier to ensure the correct source (BT, AUX, MIC) is selected.
- If using Bluetooth, ensure your device is paired and playing audio.
- If using AUX or MIC, ensure the external device is connected and functioning correctly.
- Bluetooth Connection Matambudziko:
- Iva nechokwadi chekuti amplifier is in Bluetooth pairing mode (blue light flashing).
- Make sure your Bluetooth device is within the 30+ feet wireless range.
- Forget the 'Herdio' device from your smart device's Bluetooth settings and attempt to re-pair.
- Tangazve zvese zviri zviviri amplifier neBluetooth device yako.
- Inzwi Rakakanganiswa:
- Deredza vhoriyamu pazvose zviri zviviri amplifier uye mudziyo wako wekuburitsa ruzha.
- Tarisa waya dzespika dzakabatana kuti uone kana paine tambo dzakarembera kana kuti mashort circuit akabatana.
- Ensure the audio source is not overdriven or producing distorted signals.
Zvinotsanangurwa
| Brand | Herdio |
| Model Name | HCS 818 |
| Mutauri Rudzi | Woofer, Tweeter |
| Mutauri Mukuru | 6.5 inches |
| Mutauri Mukuru Wekubuda Simba | 320 Watts |
| Impedance | 8 Ohms |
| Frequency Response | 20 KHz (Note: This is likely the upper limit, typical range is broader) |
| Kubatana Technology | Zvekubatsira, Bluetooth, USB |
| Wireless Communication Technology | Bluetooth |
| Bluetooth Range | 30 Tsoka |
| Chiyamuro Voltage | 120 Volts |
| Simba Source | Corded Electric |
| Mounting Type | Flush Mount, Ceiling Mount |
| Product Dimensions (Ampkuchenesa) | 9.25"D x 9.25"W x 4.13"H (Note: This dimension seems to be for the speaker, not the amplifier. Amplifier is typically smaller, as shown in images.) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Inodzivirira Mvura | Nhema (Haisi Kudzivirira Mvura) |
| Item Weight | 9.08 pounds (Total package weight) |
Warranty Information
The Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier inouya ne Yakakwana Warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included in your package or contact Herdio customer support directly.
Support
For further assistance, technical support, or inquiries regarding your Herdio product, please visit the official Herdio website or contact their customer service department. Contact information can typically be found on the product packaging or on the Herdio website.
