TELECO WFT402 Portable 12/230 Volt Wi-Fi Router for SIM Card User Manual

1. Chigadzirwa Pamusoroview

The TELECO WFT402 is a versatile portable Wi-Fi router designed to provide internet connectivity using a SIM card. It supports GSM, 3G, 4G, and LTE signals, converting them into a Wi-Fi hotspot with a coverage area of approximately 30 square meters. This device is ideal for mobile environments such as cars, campers, boats, or small offices, thanks to its flexible power options (12V DC and 230V AC).

The WFT402 is a Category 4 router capable of supporting up to 4 devices simultaneously, including smartphones, tablets, smart TVs, and other Wi-Fi enabled peripherals. It features an internal antenna for good signal reception and includes two SMA ports for connecting external antennas to enhance signal strength.

Mufananidzo 1.1: Mberi view of the TELECO WFT402 Portable Wi-Fi Router, showing LED indicators for system status, network, signal strength, SIM, Wi-Fi, WPS, Ethernet, and 4G connectivity.

Image 1.2: Illustration of the TELECO WFT402 router installed in a camper, demonstrating its Wi-Fi signal coverage for mobile use.

2. Setup Instructions

2.1. Package Zviri mukati

Usati waenderera mberi, iva nechokwadi chekuti zvikamu zvese zviripo:

• TELECO WFT402 Wi-Fi Router
• Power Adapter (for 230V AC)
• (Optional) 12V DC Power Cable (may be included or sold separately for vehicle use)
• Mushandisi Chinyorwa (gwaro iri)

2.2. Kuiswa kweSIM Card

1. Ita shuwa kuti router yakadzimwa.
2. Locate the SIM card slot, typically on the side or back of the device. The WFT402 uses a 2FF SIM card (standard size).
3. Insert your activated 3V or 1.8V SIM card into the push-push slot until it clicks into place. Ensure correct orientation as indicated on the device.

2.3. Simba Connection

The WFT402 router supports two power input methods:

• 230V AC Power: Connect the provided power adapter to the router's DC 12V/1A input port and then plug it into a standard wall outlet.
• 12V DC Power: For mobile applications (e.g., in vehicles), connect a compatible 12V DC power cable (not always included) to the router's DC 12V/1A input port.

Mufananidzo 2.1: Yakadzama view of the router's rear panel, highlighting the WAN/LAN port, ON/OFF switch, and DC 12V power input.

2.4. External Antenna Connection (Optional)

The router is equipped with an internal antenna. For improved signal reception, especially in areas with weak cellular coverage, you can connect one or two external antennas:

1. Locate the two SMA connectors on the back of the router.
2. Carefully screw the external antenna(s) onto the SMA connectors until secure.
3. Position the external antenna(s) for optimal signal reception.

Mufananidzo 2.2: Kumashure view of the router, illustrating the SMA ports for connecting optional external antennas.

3. Kushanda

3.1. Powering On / Off

• Kubatidza: Press the "ON/OFF" button located on the rear panel. The LED indicators on the front will illuminate.
• Kudzima: Press and hold the "ON/OFF" button until the LED indicators turn off.

3.2. LED Zviratidzo

The front panel features several LED indicators to show the router's status:

• SYS: Chiratidzo chechimiro cheSystem.
• NET: Network activity indicator.
• RF: Radio Frequency signal strength (multiple bars).
• SIM: SIM card status.
• WIFI: Wi-Fi network status.
• WPS: Wi-Fi Protected Setup status.
• ETH1: Mamiriro echiteshi cheEthernet.
• 4G: 4G LTE connectivity status.

3.3. Kubatanidza Midziyo kuburikidza neWi-Fi

1. Ensure the router is powered on and the WIFI LED is active.
2. On your device (smartphone, tablet, laptop), search for available Wi-Fi networks.
3. Select the Wi-Fi network name (SSID) broadcast by the WFT402 (usually found on a label on the router).
4. Enter the Wi-Fi password (also found on the router's label) when prompted.
5. Chishandiso chako zvino chinofanira kunge chakabatana neinternet.

3.4. Using the WPS Function

WPS (Wi-Fi Protected Setup) allows for easy connection of compatible devices without manually entering the password:

1. Press the WPS button on the router (refer to the device layout for exact location). The WPS LED will start blinking.
2. Within two minutes, activate the WPS function on your client device.
3. Midziyo inozobatana otomatiki.

3.5. Kuwana Web Interface

For advanced settings and configuration, you can access the router's web-based management interface:

1. Connect your computer to the router via Wi-Fi or an Ethernet cable (WAN/LAN port).
2. Vhura a web browser and enter the router's default IP address (usually 192.168.1.1 or similar, check the router's label or manual for the exact address).
3. Enter the default username and password (also found on the router's label or in the quick start guide).
4. You can now configure settings such as Wi-Fi name, password, security protocols (OPEN/WPA-PSK/WPA2-PSK), firewall rules, and more.

4. Kuchengeta

4.1. Kuchenesa

Kuti uchengetedze kuita kwakanyanya uye chitarisiko:

• Wipe the router's exterior with a soft, dry cloth.
• Avoid using liquid cleaners, aerosols, or abrasive materials.
• Ensure no dust accumulates in the ventilation openings.

4.2. Software Updates

The WFT402 supports software updates via TR069 and local update methods. Regularly checking for and applying updates can improve performance, security, and add new features. Refer to the router's web interface or the manufacturer's websaiti yemaitiro ekuvandudza.

4.3. Resetting Chishandiso

If the router experiences issues or you wish to restore factory settings, you can perform a reset:

1. With the router powered on, locate the reset pinhole (often labeled "RST" or "Reset") on the rear panel.
2. Use a paperclip or a similar pointed object to press and hold the reset button for approximately 5-10 seconds.
3. Release the button when the LED indicators flash or the router restarts.
4. The router will revert to its factory default settings, and you will need to reconfigure it.

5. Kugadzirisa matambudziko

• Hapana Indaneti:
  • Tarisa kana SIM kadhi yakanyatsoiswa uye yakagadziriswa.
  • Verify that the SIM LED is active and the 4G LED indicates a stable connection.
  • Ensure there is cellular signal in your location (check RF signal strength LEDs).
  • Tangazve router.
• Inononoka Wi-Fi Kumhanya:
  • Check the cellular signal strength (RF LEDs). Weak signal will result in slower speeds.
  • Reduce the distance between your device and the router.
  • Ensure no obstacles are blocking the Wi-Fi signal.
  • Consider connecting an external antenna for better reception.
  • Limit the number of connected devices if performance is critical.
• Router Isina Kubatidzwa:
  • Verify that the power adapter is securely connected to both the router and the power outlet.
  • Tarisa kana magetsi emagetsi ari kushanda.
  • Iva nechokwadi chekuti switch yeON/OFF iri panzvimbo ye 'ON'.
• Haikwanisi kubatana neWi-Fi:
  • Tarisa kaviri password yeWi-Fi.
  • Ensure the WIFI LED is illuminated.
  • Try restarting both the router and your client device.
  • If you recently changed Wi-Fi settings, try resetting the router to factory defaults (see Section 4.3).

6. Zvinyorwa zveUnyanzvi

7. Warranty uye Tsigiro

Information regarding spare parts availability and guaranteed software updates is not available in the provided product data. For specific warranty details, technical support, or inquiries about spare parts, please refer to the documentation included with your purchase or contact Teleco customer service directly.

You can typically find contact information for Teleco on their official websaiti kana kuburikidza nemutengesi wako.