1. Nhanganyaya
The Fanvil PA2S is an advanced IP SIP Paging Gateway designed for robust media streaming using standard IP/RTP/RTSP protocols. This versatile device integrates multiple functionalities including broadcast, recording, intercom, and security features, making it suitable for various deployment scenarios. Its compact design facilitates integration into diverse solutions.
2. Safety Information
Please read these safety instructions carefully before using the Fanvil PA2S. Failure to follow these guidelines may result in electric shock, fire, or damage to the device.
- Magetsi: Use only the specified power adapter (12V-24V DC) or a compliant Power over Ethernet (PoE) source. Ensure the power source matches the device's requirements.
- Environment: Operate the device in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture. Avoid extreme temperatures.
- Kubata: Do not drop, disassemble, or attempt to repair the device yourself. Refer all servicing to qualified personnel.
- Tambo: Ensure all cables are securely connected and not damaged. Do not route cables where they can be tripped over or damaged.
3. Package Zviri mukati
Ona kuti zvinhu zvese zviripo mupasuru yako:
- Fanvil PA2S Unit
- Power Adapter (may vary by region/bundle, if not using PoE)
- Mounting Accessories (screws, brackets)
- Quick Installation Guide (this manual)
4. Chigadzirwa Pamusoroview
The Fanvil PA2S features a compact design with various interfaces for connectivity and control.
4.1 Dhizaini Dhizaini
Mufananidzo 1: Mberi view of the Fanvil PA2S, showing various input/output terminals and power input.
Mufananidzo 2: Angled view of the Fanvil PA2S, highlighting the network ports on the side.
4.2 Mamiriro Akakosha
- Emergency button interface for active calls.
- Adaptive 10/100 Mbps network port with built-in Power over Ethernet (PoE).
- NVR video recording support via standard RJ45 interface.
- Recording output with a 3.5 mm standard audio interface.
- Audio output port for connecting an expandable external active speaker.
- One switching signal input and output (built-in relay).
- Mono Channel Power Amplifier Output (10W~30W), adjustable based on input voltage.
5. Setup
Follow these steps to set up your Fanvil PA2S:
- Kukwidza: Secure the PA2S unit in your desired location using the provided mounting accessories. Ensure adequate ventilation.
- Network Connection: Connect an Ethernet cable from your network switch or router to the RJ45 network port on the PA2S. If using PoE, this single cable will also provide power.
- Power Connection (if not using PoE): If PoE is not available, connect a 12V-24V DC power adapter to the power input port on the PA2S.
- Audio Output: Connect external speakers to the "SPK LINE OUT" terminals or an active speaker to the 3.5mm audio output port.
- Maikorofoni Inopinza: Connect a microphone to the "MIC" terminals if required for intercom or recording.
- Logic Input/Output: Connect external devices for security triggers or control via the "LOGIC IN/OUT" terminals as per your system design.
- Configuration: Svika mudziyo wacho web interface via its IP address (refer to your network's DHCP server or use a network scanner to find it) to configure SIP accounts, paging zones, and other settings.
6. Operating Instructions
The Fanvil PA2S operates as a SIP endpoint, integrating with your existing IP PBX or SIP server to provide various communication and security functions.
- Paging/Broadcast: Initiate a page or broadcast by dialing the configured extension of the PA2S from a SIP phone. The audio will be streamed to connected speakers.
- Intercom: Utilize the microphone input and speaker output for two-way audio communication when configured as an intercom endpoint.
- Kurekodha: The device supports recording output via its 3.5mm interface, allowing integration with external recording systems.
- Chengetedzo Mabasa: The logic input/output and emergency button interface enable integration with security systems for trigger events and active calls.
- Kudzora inzwi: Adjust output volume through the device's web interface or connected SIP phone controls, if supported.
7. Kuchengeta
Regular maintenance ensures optimal performance and longevity of your Fanvil PA2S.
- Kuchenesa: Shandisa jira rakapfava, rakaoma kuchenesa kunze kwemudziyo. Usashandise mvura yekuchenesa kana aerosols.
- Firmware Dzokorora: Nguva nenguva tarisa mukuru weFanvil website for firmware updates. Updating the firmware can improve performance, add new features, and fix bugs. Follow the instructions provided with the firmware update carefully.
- Kuongorora Zvakatipoteredza: Ensure the operating environment remains within recommended temperature and humidity ranges.
8. Kugadzirisa matambudziko
If you encounter issues with your Fanvil PA2S, refer to the following common problems and solutions:
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| No Power/Device not turning on | Incorrect power adapter; PoE not active; faulty cable. | Verify power adapter (12V-24V DC) or PoE switch functionality. Check power and Ethernet cable connections. |
| Hapana network yekubatanidza | Faulty Ethernet cable; incorrect network settings; switch port issue. | Check Ethernet cable. Verify network settings (IP address, subnet mask, gateway) in the device's web interface. Ensure the network switch port is active. |
| Hapana audio inobuda | Speakers not connected; incorrect volume settings; audio output disabled. | Ensure speakers are correctly wired to "SPK LINE OUT" or active speaker to 3.5mm port. Check volume settings in the web interface. Confirm audio output is enabled. |
| Cannot register to SIP server | Incorrect SIP account details; network firewall blocking SIP ports; server issues. | Verify SIP server address, port, username, and password. Check firewall rules. Contact your SIP service provider or IT administrator. |
9. Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Brand | Fanvil |
| Model Number | PA2S |
| Item Weight | 11.3 ounces (inenge 320g) |
| Zviyero zveChigadzirwa (LxWxH) | 5.91 x 78.74 x 5.91 inches (Note: The length of 78.74 inches appears to be a data error and is unusually long for this type of device.) |
| Network inowanikwa | 10/100 Mbps Ethernet, Adaptive, Built-in PoE |
| Power Input | 12V-24V DC or PoE |
| Audio Output Power | 10W~30W Mono Channel (adjustable by input voltage) |
| Audio Interfaces | SPK Line Out, 3.5mm Recording Output, 3.5mm Audio Output Port, MIC Input |
| Chengetedza Nzvimbo | LED, Key, Logic In/Out, Emergency Button |
10. Warranty uye Tsigiro
For warranty information, technical support, or service inquiries regarding your Fanvil PA2S, please contact Fanvil customer support directly or visit their official website. Chengeta risiti rako rekutenga seumboo hwekutenga.
Mukuru weFanvil Websaiti: www.dddk.co.uk
